Pusat permesinan BLOCK-HOUSE untuk konstruksi kayu

Krüsi CM-40

Kondisi: baik (bekas), Tahun pembuatan: 1996, EN-KRUSI-Chalet-Construction-Machine-Blockhouse-Production-Line- Type-CM-40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / operational Operating principle: Processing of structural timber for chalet construction / log house manufacturing Beams can be machined in a single pass • Cross-cutting • Horizontal and vertical milling of tenons / grooves in one clamping • Drilling • Milling of face grooves Workpiece: • Maximum cutting height: 200 mm • Maximum cutting width: 250 mm Robust welded steel construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground linear guides for highest machining precision. Carriage runs on dust-protected and preloaded ball bearing guide rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control system. Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for external chip extraction, with 2 eccentric clamps, without milling tool (rebate cutter). With electro-controlled hydropneumatic horizontal and vertical feed, feed is synchronized with the start of the milling motors. Rapid traverse and feed rate continuously adjustable. Completely wired and installed, including air maintenance unit. Timber thicker than 14 cm must be machined in two passes. Such pieces must be repositioned to compensate for the excess thickness for second milling. Machine safety covers over moving parts with gas spring counterbalancing. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog gauge Max. saw blade diameter / bore: 400 / 30 mm Carbide-tipped with chip depth limiter (downcut) Adjustable riving knife Motor speed: min-1 / 2900 Kjdpfxeu Uh T Do Aabsdw Power: 2.2 kW 2. CM milling unit (log house unit) Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter diameter: 180 mm Max. cutter width: 130 mm (For cutter width from 60 mm, only use cutters made of aluminum alloy with indexable inserts) 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and feed rate infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog indication Collet chuck: ER 25 Clamping diameter max: 16 mm Drill diameter max: 32 mm Motor: min-1 1450, 1.8 kW 4. Face-milling unit Hydropneumatic feed Spindle adjustment with digital display Max. cutter diameter: 230 mm Max. cutter width: 60 mm Motor: min-1 / 2900, 3.0 kW 2 v-belts SPZ 9.5x1000 La Pneumatics: Customer-side operating pressure min/max: MPa (bar): 0.7/1 (7/10) Compressed air consumption: 8 Nm3/h Electrics: Operating voltage: V / Hz 380, 50 Rated power: 8.8-15.8 kW depending on configuration Customer-side fuse: 3 x 25 A (slow blow) Max. simultaneous power consumption: 4.4 kW Dimensions: Machine width: 2400 mm Machine depth: 1600 mm Total height, guard down: 1600 mm Total height, guard up: 2200 mm Extraction port diameter (bottom extraction): Approx. weight: 1300 kg Incl. 2 x 6 m (2 x 4 m) roller conveyors Technical specifications subject to change!

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, EN: KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Year of manufacture: 1996 Krüsi CM40, comprising the following components: - Circular saw (cross-cut saw) - Log house milling unit horizontal and vertical - Groove milling units (horizontal) - Boring unit - Infeed table 6m - Outfeed table 6m KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund, AR Year of manufacture: 1996 CE-marked Condition: Good, technically inspected and cleaned / ready for operation Operating Principle: Processing of timber for chalet / log house construction Beams can be machined in a single operation: - Cross-cutting Kodpfxevfv Tfs Aabodw - Horizontal and vertical milling of tenons / grooves in a single clamping - Drilling - Milling front grooves Workpiece: - Max. cutting height: 200 mm - Max. cutting width: 250 mm Robust welded construction. Machine (horizontal and vertical milling units) with 4 special milling motors, Hardened and ground guides for highest machining accuracy. Carriage guidance by dust-protected, preloaded, ball-bearing rollers. Working area up to 200 x 250 mm. Fully operational with contactor control, Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, Central connection for customer-provided chip extraction system, with 2 excenter clamps, Without milling tools (profile cutters). Hydropneumatic horizontal and vertical feed, electrically controlled, together with spindle motor activation. Rapid traverse and feed continuously adjustable. Completely wired and installed, including air maintenance unit. Timbers thicker than 14 cm must be machined in two clampings. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog measurement display Saw blade Ø max. / bore ø 400 / 30 mm Tungsten carbide-tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2.2 2. CM Milling Unit (Log House Unit): Hydropneumatic feed Spindle adjustment with digital readout Horizontal milling unit Cutter Ø 180 mm Maximum cutter width 130 mm For cutter widths over 60 mm use only alloy cutters with indexable inserts 2 hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed Rapid traverse and working feed continuously adjustable 3. Drilling unit: Manual feed Spindle adjustment with analog display Drill holder collet chuck ER 25 Max. clamping Ø 16 mm Max. drill Ø 32 mm Motor min-1 1450, kW 1.8 4. Planing/milling unit: Hydropneumatic feed Spindle adjustment with digital display Max. cutter Ø 230 mm Max. cutter width 60 mm Motor min-1 / 2900, kW 3.0 2 V-belts SPZ 9.5x1000 La Pneumatics: Required operating pressure min/max MPa (bar): 0.7/1 (7/10) Air consumption Nm3/h: 8 Electrical equipment: Operating voltage V / Hz: 380, 50 Rated power kW: 8.8–15.8 depending on version Customer-side main fuse: A 3 x 25 tr

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 POS 1: Motorized Roller Conveyor Working width 400 mm, infinitely variable feed speed 2.0 kW motor, length 6000 mm POS 2: Longitudinal Saw Saw blade diameter 400 mm Pneumatic adjustment of cutting depth Main motor 4.0 kW POS 5: KRÜSI Chalet Construction Machine / Log House Production Machine Type CM 40 Machine no. 431 Year of manufacture: 1996 Saw Unit: Manual feed Spindle adjustment with analog position indicator CM Milling Unit: Hydropneumatic feed Spindle adjustment with digital position display Drilling Unit: Manual feed Spindle adjustment with analog position indicator End Milling Unit: Hydropneumatic feed Spindle adjustment with digital position display POS 6: Motorized Roller Conveyor Working width 400 mm, infinitely variable feed speed Kedpfshw N Npjx Aabjdw 2.0 kW feed motor Length 12,000 mm 9 adjustable, pneumatically controlled stop flaps 10 lateral pushers for material transfer POS 7: Assembly Table 4,400 mm x 12,000 mm Manufacturer: Sweden Year of manufacture: approx. 1985 Assembly table for further processing of manufactured log house beams. 4 chain hoists for transverse transport Gear motor with 4.0 kW