Rak tugas berat

Kragarmregal einseitig Höhe: 4.160 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) Isdpfxjmhhf Sj Afieia - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: bekas, Tahun pembuatan: 2009, panjang total: 5.500 mm, lebar total: 2.300 mm, tinggi total: 2.900 mm, trans_01 Iiodpfjxrl Hdex Afioa

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, nomor mesin/kendaraan: 15221, tahun perombakan terakhir: 2025, Perlengkapan: Penandaan CE, dokumentasi / manual, We are currently offering a "Thalmann" double bending machine in excellent condition for sale. Exact specification: THALMANN - Double Bending Folding Machine - Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT system The machine is in outstanding condition both visually and technically and is fully operational. Iiodpfx Aeyyxlxjfiea The machine was installed/commissioned in 2021 (year of manufacture: 2020). Reason for sale: "Simply lack of utilization" by the first owner (sheet metal workshop). The machine operates flawlessly and is still in daily use. Technical details: Status as of: 31.03.2026 Operating hours control system: XXX Operating hours pump: XXX Number of cutting cycles: XXX Total number of processed sheets: XXX Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Bending beam width: 10 mm + 10 mm extension rail Maximum bending capacity: S = 20 mm 1.50 mm steel sheet (Re 275 N/mm²) 180° hemming capacity: 50% of the bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (with crowning system) Number of grippers / travel range of grippers: 7 units / 15 mm - 1250 mm Maximum gripper opening: 35 mm Tapered back gauge: multi-zone function Number of back gauge fingers / travel: 7 units / 5 mm - 1150 mm Back gauge tolerance field: +/- 0.1 mm per set repeat accuracy Electrical voltage: 400 V / 50 Hz / 3-phase + PE Rated current / fuse / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg Compressed air connection: 6 bar Included additional equipment and features: - Freely running automatic cutter: 1.5 mm steel: 1 item - Curved clamping beam, ratio H x D = 1:2: 1 item - Additional gripper/finger back gauge units: 3 items - Clamping beams in high-strength HARDOX steel: 1 item - Hydraulic sheet thickness adjustment: 1 item - Automatic sheet loading and handling table: 1 item - Automatic sheet turning device: 1 item - M-Guard remote maintenance support (instead of TeamViewer): 1 item - LED bending line illumination with RGB color selection: 1 item All information is provided without guarantee – errors excepted.

Kondisi: belum diuji (bekas),

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Iisdsg U Uv Rjpfx Afisa Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 50 l, warna: merah, berat keseluruhan: 2.600 kg, berat kosong: 2.500 kg, daya angkat: 1.000 kg/m, tinggi angkat: 3.310 mm, kondisi ban: 100 persen, konfigurasi gandar: 2 gandar, jumlah tempat duduk: 1, volume sekop: 0,4 m³, lebar bucket penggalian: 160 mm, Tahun pembuatan: 2025, kapasitas angkut: 980 kg, Perlengkapan: boom yang dapat disesuaikan, garpu palet, hidrolik, kabin, kopling trailer, kunci diferensial, lampu depan tambahan, pelindung kepala, penggerak semua roda, sekop standar, The H&R 2210-T telescopic loader is equipped with the new 3-cylinder Perkins turbo engine, offering 18.5 kW (built in Mannheim, Germany), which meets the Euro 5 standard even without a diesel particulate filter. The new turbo engine is exceptionally economical, and with the 2-stage hydrostatic drive, it achieves a top speed of approx. 16 km/h. Thanks to its generous steering angle of 42° and tight turning radius, it is highly maneuverable even in confined spaces. Iiedpfx Afoul Af Doija The 2210T wheel loader with telescopic boom comes standard with a quick-attach pallet fork and a standard bucket, allowing you to start work immediately. The additional hydraulic circuit enables the use of various attachments for the farm loader. The telescopic arm gives the 2210-T excellent reach. The electronic gear control (E-Gang) on the joystick makes operation particularly comfortable. H&R loaders are thoroughly optimized both technically and visually at our facility and undergo comprehensive quality checks. In addition, each machine receives extensive corrosion protection treatment. Our loaders are CE-compliant in accordance with the EU Machinery Directive. TUV Süd certification for individual operating approval in accordance with §21 StVZO (road approval / operating permit as self-propelled work machine) is available for our machines. Advantages of the H&R 2210T Telehandler: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic boom • Heated comfort cabin • Incl. pallet fork • Incl. standard bucket 150 cm • Joystick with float position and E-Gear • Auxiliary hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Rear-view camera with display • Rotating beacon • LED work lights front & rear • Wide tyres 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE-compliant to EU Machinery Directive Price Net: €24,975.00 VAT: €4,745.25 Gross: €29,720.25 Financing available! Optional: 2-year warranty: €590.00 TÜV road approval / operating permit as workplace machine: €595.00 Transport within Germany & Austria upon request Technical Specifications Engine: 3-cylinder Perkins turbo Power: 25 hp Emission class: Euro 5 Lifting capacity: 980 kg Lift height: 3310 mm (underside of standard pallet fork) Dumping height: 2796 mm (underside of standard bucket tipped) Lift / Lower time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3710 x 1496 x 2340 mm Weight: 2430 kg Tyres: 31 x 15.5 - 15 Accessories and spare parts available from us. When making inquiries, please provide your phone number!

Kondisi: bekas, Tahun pembuatan: 1986, Winkelstahl 120 x 13 mm Isdpfjt D Nz Aox Afioia

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, SPINNTROCKNER VSD500 Ein fortschrittlicher Gemüse- und Salatschleuder-Trockner mit ergonomischem Design und gegenläufigem Zentrifugenzyklus. Diese Maschine trocknet effizient Salat, Gemüse, Obst und mehr und trägt so zur Qualitätserhaltung und Verlängerung der Haltbarkeit bei. Der VSD500 verfügt über eine offene Bauweise für eine einfache Reinigung – ohne schraubenbedingte Schmutzfugen – sowie über eine praktische Deckelverriegelung auf der Rückseite. Der Zentrifugenzyklus wechselt während des Betriebs die Drehrichtung, um das Produkt optimal zu lockern. Die effektive Wasserabführung wird durch ein Nadelaufnahme-System gewährleistet, das die Drehgeschwindigkeit des Korbes anpasst. Modernisieren Sie Ihre Verarbeitung mit dem VSD500 für unerreichte Effizienz und erstklassige Trocknungsergebnisse. HAUPTVORTEILE Effiziente Trocknungsleistung: Mit seinem ergonomischen Design und dem gegenläufigen Zentrifugenzyklus sorgt der VSD500 für effizientes Trocknen von Salat, Gemüse, Obst und mehr. Qualitätserhalt: Dieser fortschrittliche Trockner trägt zur Qualitätserhaltung des Produkts bei, verlängert dessen Haltbarkeit und sichert Frische. Einfache Reinigung: Die offene Konstruktion im Zentrifugenbereich ermöglicht einen mühelosen Zugang für schnelle und unkomplizierte Reinigungs- und Wartungsarbeiten. Isdpfx Aoixldvsfijia Hygienisches Design: Der Verzicht auf schraubenbedingte Schmutzfugen im Schleuderbereich verhindert Schmutzablagerungen und sorgt für einen besonders hygienischen Betrieb. Praktischer Deckelverschluss: Die Deckelverriegelung ist rückseitig am Gehäuse angebracht und erhöht den Bedienkomfort. Verbesserte Wasserabführung und Rotation: Der Zentrifugenzyklus wechselt während des Vorgangs die Drehrichtung zur besseren Produktauflockerung. Das Nadelaufnahme-System des rotierenden Korbes passt die Drehgeschwindigkeit optimal an und gewährleistet eine effektive Wasserabführung.

Tahun pembuatan: 1992, Kondisi: siap digunakan (bekas), Working length: 4300 mm, pressing force: 2000 kN, connected load: 15 kW, weight: 18 t, including bending tools. Isdpsi Dx Sbsfx Afijia

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.323.36002, 22621 Technical Specifications: - Maximum working length: 3500 mm - Frame gap/Distance between uprights: 3050 mm - Maximum pressing force: 2000 kN - Distance table/ram (max.): 480 mm - Throat depth: 260 mm - Ram stroke approx.: 300 mm - Stroke speeds: - Downward rapid traverse (max.): 100 mm/sec - Upward speed: 80 mm/sec - Pressing speed (downward, max.): 10 mm/sec - Total drive power: 25 kW - Installation dimensions (approx.): W 4500 x H 3150 x D 2100 mm Iijdpfsip Nikox Afiea - Weight (approx.): 16,000 kg Includes: - CNC control (CYBELEC), renewed in 2008 - CNC-controlled crowning system - CNC-controlled backgauge with height adjustment, 5 - 1000 mm - Hydraulic tool clamping - Top tool and universal die - Sheet supports - Two-hand control console