Mesin cetak injeksi

KraussMaffei KM 1100–12000 MX

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei Injection Moulding Machine KM 1100–12000 MX Year of Manufacture: 2008 Robot: Wittmann Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in 3 USB ports. Plasticizing Unit: Complete plasticizing unit for thermoplastics, abrasion-resistant version, screw diameter 120 mm, with non-return valve and open nozzle. Technical Data Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Djdpfxjx Tgbhs Abhocc Platen dimensions (H × V): 2,210 × 1,910 mm Tie-bar clearance (H × V): 1,550 × 1,250 mm Mould opening stroke: 2,000 mm Mould height (min–max): 600 – 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical & Hydraulic Equipment Nominal pump drive power: 132 kW Installed heater capacity: 82 kW Number of barrel heating zones: 7 Dry cycle rate (Euromap): 802 1/h Hydraulic tank capacity: 2,440 l Dimensions & Weight Net weight with control cabinet: 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Dcsdpfew Aw Tasx Abhsc Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. daylight between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and Cooling: Installed power of main drives: 265 kW Hydraulic tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated from the machine control panel Machine in excellent technical condition – latest generation of ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, white goods, technical applications). The machine remains powered and can be tested on site. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operational videos, technical documentation, and arrange a convenient viewing time.

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 83.000 h, gaya penjepit: 350 kN, diameter sekrup: 25 mm, For sale: Injection moulding machine by Arburg, model 320S 350-60 Dcjdpfx Ajhhuq Asbhoc Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide on request and for an additional fee. Price incl. VAT Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TET351P5-offAD-Bypass - 2200373733, kapasitas pendinginan: 66 kW (89,73 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, berat keseluruhan: 1.082 kg, suhu lingkungan (maks.): 46 °C, suhu lingkungan (min.): -5 °C, tegangan masuk: 400 V, tekanan: 6 batang, suhu: 7 °C, laju aliran volumetrik: 11,2 m³/jam, tekanan pompa: 4,68 batang, lebar total: 866 mm, panjang total: 2.250 mm, tinggi total: 2.054 mm, masa garansi: 3 bulan, frekuensi input: 50 Hz, Perlengkapan: Pelat tipe tersedia, Air-cooled process chiller / chiller unit Model: TAEevo Tech 351 P5-offAD-Bypass Manufacturer: MTA S.p.A. Chiller, cold water unit; cooler The TAEevo Tech 351 P5-offAD-Bypass is a compact, air-cooled water chiller suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special equipment: - Open filling system / tank mounted - Manual valve bypass between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Starting current (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of construction: 2021 Condition: Visual 2, Technically OK Used (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have cosmetic defects due to usage. (Technical modifications and prior sale reserved!) Dedpfjwlt Raox Abhjcc

Kondisi: baik (bekas), Tahun pembuatan: 2000, Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Platen size: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g Dcodpjrthkuofx Abhjc New ARB 777 temperature control board (cost: €2,750)

Kondisi: bekas, Tahun pembuatan: 2000, jam operasional: 144.381 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.000 kN, For sale is an injection moulding machine from Arburg, model 520 C 2000-675. Technical specifications: Year of manufacture: 2000 Clamping force: 2000 kN Operating hours: 144,381 Pump motor power: 30 kW Transport and loading can be arranged Europe-wide upon request and for an additional charge. Prices plus VAT. Dedpsu Uuakjfx Abhecc Viewing possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or ways to contact us, please visit our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Krauss Maffei Injection Moulding Machine KM 800 – 12000 MX Year of manufacture: 2006 Clamping unit: - Clamping force: 8,000 kN - Mould opening force: 560 kN - Platen dimensions (h x v): 1,600 x 1,530 mm - Tie bar clearance (h x v): 1,120 x 1,000 mm - Mould opening stroke: 1,600 mm - Mould height (min - max): 500–1,100 mm - Platen opening distance: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit: - Screw diameter: 135 mm Dcedpfstmq Akjx Abhsc - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight (PS): 6,098 g - Screw speed, standard/option: 121/153 rpm - Injection rate (standard) Electrical and hydraulic equipment: - Rated pump drive power: 110 kW - Installed heater power: 57 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap: 965 cycles/h - Oil tank capacity: 1,500 l Dimensions and weight: - Net weight incl. control cabinet: 45 t - Machine dimensions (L x W x H): 10.81 x 2.92 x 2.51 m

Kondisi: bekas, Scrubber dryer, floor cleaning machine, sweeper Dodec R S E Sjpfx Abhjcc - Handover in as-is condition as inspected - Machine is without battery, brush, and squeegee - Working width: 500 mm - Charger - Quantity: 1 unit available - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Arburg Allrounder 420C 1000-350/150 Dcodop Audqspfx Abhoc Arburg Two-component injection moulding machine with 100 tons clamping force. Year of manufacture: 2002. 79,115 operating hours. The machine is delivered fully refurbished by our team of technical experts and in perfect working condition. We can also offer on-site commissioning to guarantee functionality. Extras include: Rotary platen, Geiger Robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR Vertical / 2120 BAR Horizontal INJECTION VOLUME: Horizontal 182cm³ INJECTION VOLUME: Vertical 54cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOLD HEIGHT: 250 mm MAXIMUM DAYLIGHT BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 YEAR OF MANUFACTURE: 2002

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm Dcodpotrya Refx Abhsc - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m