Mesin cetak injeksi

KraussMaffei KM 3200-19000 MC

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar Dujdpfstrya Rsx Aaqjt - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, tinggi total: 2.700 mm, panjang total: 2.800 mm, lebar total: 3.550 mm, lebar meja: 600 mm, panjang meja: 1.200 mm, beban meja: 800 kg, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 8.000 rpm, hidung spindel: SK40, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, V10 Vertical precision machining center with cross-table design Machine Specification: Control: FANUC 0i-MF Travel: X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Spindle nose to table surface: 150 - 750 mm Precision: Positioning accuracy: 0.008/0.006/0.006 mm (X/Y/Z) Repeatability: 0.005/0.004/0.004 mm (X/Y/Z) Table: Table size: 1,200 x 600 mm Max. load: 800 kg T-slot (table): 5x18x100 mm Spindle: Drive type: Belt drive Max. speed: 8,000 rpm Power: 7.5/11 kW Tool holder: SK40 Drawbar: MAS P40T-I (45°) Feed Rates: Rapid traverse (X/Y/Z): 36/36/36 m/min Cutting feed rate: 15/15/15 m/min Tool magazine: Capacity: 24 stations Type: SK40 Max. tool diameter: 80 mm Max. tool diameter (adjacent free): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Indexing (tool to tool): 2.5 secs Dedpfxevtz Dxj Aaqeut Power supply: 30 kVA Machine weight: 6.5 t Dimensions (LxWxH): 2800 x 3550 x 2650 mm Standard configuration: • Control: Mitsubishi M80VB • 8,000 rpm belt-driven spindle • 24-position automatic tool changer • Pneumatic and hydraulic lubrication system • Coolant system • Internal coolant tank with chip conveyor • Full enclosure • Air gun • 3-color signal tower • Standard accessories • Chip cart • CE compliant Options: • SIEMENS 828D • FANUC 0i • 10,000 rpm belt-driven spindle • 12,000 rpm direct drive spindle • Spindle oil chiller • NC rotary table, 4th axis • Tool measurement system • Tool magazine safety cover • Water gun • Oil skimmer • Chip conveyor with chip cart • Oil mist extraction (preparation) • Alternative coolant tank for aluminum chips • Air conditioning for electrical cabinet • Glass scales (not available for V6)

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Duedpfx Aouiykdoaqot

Kondisi: hampir baru (bekas), Tahun pembuatan: 2003, We are selling a complete Krauss-Maffei MC 4 control system, tested and fully functional! Dsdpfx Aeikfmhsaqsut

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), A large-format injection moulding machine Krauss-Maffei, without robot, conveying equipment, safety enclosure, or attachments, is available. Clamping force: 1300t, injection volume: approx. 8,000cm³. Overall system dimensions (L/W/H): approx. 13,000mm / 3,550mm / 2,850mm. Machine weight: approx. 83,000kg. Operating hours: 73,259h, production hours: 57,753h. Documentation available. On-site inspection possible. Expected availability from Q1/2026. Dodjwut Hyjpfx Aaqjut

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 88 kW (119,65 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, berat keseluruhan: 1.700 kg, tegangan masuk: 400 V, lebar total: 1.300 mm, panjang total: 2.000 mm, tinggi total: 2.000 mm, masa garansi: 6 bulan, de Dusdpfx Aaswlnwuoqst

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: X82600, gaya penjepit: 12.000 kN, diameter sekrup: 150 mm, Used Stork IMM 12000-19000 injection moulding machine. Djdpfx Aajwhkfyjqjut

Kondisi: baik (bekas), Tahun pembuatan: 2004, gaya penjepit: 23.000 kN, engel_2300t_inj_molding_machine_desc Dedpfxsxrcahe Aaqsut

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Djdpfx Asyh I Emeaqeut

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 862-1053, plastic-injection-moulding-machine-mannesmann-demag-ergotech-500 0-2300 Djdpfx Ajygikwsaqeut