Mesin cetak injeksi

KraussMaffei KM 350–2700 C2+

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Lodeyv E Nvspfx Al Nsad Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: baik (bekas), Tahun pembuatan: 2008, 10564 Laodpexvw Izsfx Al Njd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture – 2004 System: Fully hydraulic Control: MC4, colour monitor, integrated control panel, built-in disk station 2. Plasticising unit Complete plasticising unit for thermoplastics Version with abrasion protection Lasdpsx Elukjfx Al Nsd Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould installation height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard screw speed: 108 g/s Output at increased screw speed: 141 g/s Electro-hydraulic equipment Pump motor power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, de-to-hu-20240625-1 Ljdpsxf Ii Ujfx Al Njad

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, jam operasional: 39.945 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 580 mm, jarak gerak sumbu Z: 400 mm, produsen pengendali: Heidenhain iTNC 530, tinggi total: 2.900 mm, panjang total: 5.500 mm, lebar total: 2.650 mm, kecepatan spindel (min.): 28.000 rpm, pasokan pendingin: 40 batang, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001° increments) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC Milling/Turning Table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: base plate for root pallet Max. workpiece size (D x H) mm: for GPS 240 pallet (275 x 275 x 200 mm); for GPS 120 pallet (150 x 150 x 200 mm); for ITS50 pallet (ø70 x 200 mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% duty cycle/continuous) Ledpfx Aljxv Av Rs Nsad Cooling Coolant supply through spindle bar: 40 Tank capacity litres: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probing system Internal coolant supply Rotating safety windows Rinsing gun Selectable air blast through spindle via M function Laser tool measurement for tool length and diameter 3D quickSET Preparation for external pallet transfer High-precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine hours: Power-on hours: 62,983 Spindle working hours: 39,945 Total power requirement kVA: 55 Basic machine: Dimensions/Weight Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 15.070 h, gaya penjepit: 900 kN, diameter sekrup: 42 mm, tekanan injeksi: 1.724 batang, berat injeksi: 193 g, BOY 90A (102) Without Hopper General Information Article Number: 102 Availability: In stock Year of Manufacture: 2006 Brand: Boy Technical Data Shot Weight: 193 g Clamping Force: 900 kN Screw Diameter: 42 mm Injection Pressure: 1724 bar Tie Bar Distance: 430x360 mm Platen Size: 635x610 mm Minimum Mold Height: 250 mm Control System: Procan CT Control Language: German Power: 26.3 kW Operating Hours: 15,070 h Weight: 3,100 kg Laedpfx Alevuqnco Ned Dimensions: 4.9x1.2x2.1 m Hopper: No

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 350 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 300 mm, berat benda kerja (maks.): 500 kg, tinggi total: 2.398 mm, lebar total: 1.690 mm, panjang total: 1.900 mm, gores kuas bulu: 300 mm, panjang benda kerja (maks.): 790 mm, lebar benda kerja (maks.): 530 mm, tinggi benda kerja (maks.): 275 mm, berat keseluruhan: 2.800 kg, kapasitas tangki: 410 l, GF Machining Solutions FORM 200 Year of manufacture: 2015 – Only 7,200 eroding hours! Die-sinking EDM machine in C-frame design Fixed table with lowering tank Travel (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100–325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (choice of system) Max. electrode weight: 50 kg Max. moment of inertia: 2,000 kgcm² 4-position electrode changer Control interface: AC FORM HMI Operation via 15" LCD color touchscreen Keyboard and hand control unit also available Machine dimensions: 1,900 x 1,690 x 2,398 mm Total weight: 2,800 kg The machine will be cleaned and serviced by us after order placement. Subsequently, an erosion test will be performed. We are happy to commission the machine at your site and provide operator training. Lasdpfxjwi Iuuo Al Ned Optional: - Transport - Cooling unit - Dielectric fluid - Clamping devices

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Clamping force: 1250 kN Screw diameter: 35 mm Lajdpfx Alowthfuj Njd Tie bar spacing: 470 mm Shot weight: 142 g Minimum mold height: 300 mm Total weight: approx. 6,000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Mesin injeksi Engel Victory 330/60 TECH Tahun produksi: 2007 Unit penutup: Gaya penutup: 600 kN Dimensi plat (meja): 720 mm Tinggi cetakan: 600 mm Langkah buka: 900 mm Langkah ejektor: 115 mm Gaya ejektor: 125 mm Unit injeksi: Diameter ulir: 35 mm Volume injeksi: 154 cm³ Tekanan injeksi: 2400 bar Berat mesin: 5.300 kg Lajdpexwviaefx Al Nod

Kondisi: bekas, Tahun pembuatan: 2008, de-hu-it-lt-001 Lodpfeyyqtuex Al Nsad