Beli Mikron Wf 3 bekas (190)

Kondisi: sangat baik (bekas), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot pitch: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step ratio: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travels Longitudinal travel of clamping table (X-axis): Automatic: 400 mm Cross travel of clamping table (Y-axis): Automatic: 400 mm Vertical travel of clamping table (Z-axis): Automatic: 385 mm No guarantee is given for the accuracy, completeness or currency of the information provided. Bsdpolnfggofx Am Iswl

Kondisi: bekas, Tahun pembuatan: 1986, de-to-hu-it-lt-lv-nb-nl-pl-001 Bwodpfx Aoyy A Rljm Iel

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Fabr.Nr. 21S0218, Kami menawarkan mesin frais Mikron Type WF 2/3 bekas ini, tahun pembuatan tidak diketahui. Kode: ID 50285 Tipe: M23 Nomor seri: 78183 Tegangan nominal: 168 V Arus nominal: 13,6 A Daya nominal (tertutup): 2000 W Putaran nominal (tertutup): 3000 rpm Mode operasi (tertutup): S1 Daya nominal (berventilasi): 3000 W Putaran nominal (berventilasi): 3000 rpm Mode operasi (berventilasi): S1 Bedpfx Amjyz Ir Dj Iewl Kapasitas aliran: 10 l/s Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: baik (bekas), Tahun pembuatan: 1992, Mikron WF 3 DPM Tool Milling Machine Mikron WF 3 DPM with Heidenhain TNC 135 Control Year of manufacture: 1988 Overhauled in 2014 Excellent CONDITION Technical Data: Year of manufacture: 1988 / 2014 Fixed angle table Spindle speed: 31.5 to 3150 rpm Infinitely variable feed on 3 axes from 0 to 2000 mm/min Travels X/Y/Z: 500/500/400 mm Rapid traverse x/y/z: 3 m/min Table size: 800 x 450 mm Table load: 250 kg Vertical quill stroke: 90 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight approx. 1950 kg Space requirement approx.: 2.3 x 2 x 2 m Drive power: 12 KVA Accessories and Equipment: Heidenhain TNC 135 control Hydraulic clamping vertical and horizontal Bwedpfeyxc Unex Am Isl Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, machine control manual and programming examples Handwheels Coolant system About the machine: Offered here is a Mikron WF 3 DPM tool milling machine with Heidenhain TNC 135 control. This universal milling machine is in very good original condition. It comes from a facility where it was only slightly used for prototype construction. The machine is easy to operate. Furthermore, it features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple, thanks to the pivoting vertical head. The ways are lubricated regularly by the central lubrication system. The Mikron has been mechanically and electrically inspected by us. You are welcome to inspect and test the Mikron on site under power. More milling machines from renowned manufacturers can be found on our website.

Kondisi: bekas, Tahun pembuatan: 1980, X-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 – 2240 rpm Infinitely variable feed: 1 – 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Heidenhain TNC 131 control, tilting device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping of all axes; the working axis is automatically released, all axes can be released for manual operation. Bwodpfxscxxq Do Am Ijl

Kondisi: bekas, Tahun pembuatan: 1985, x-axis travel 500 mm y-axis travel 500 mm z-axis travel 350 mm Table surface 800 x 450 mm Spindle taper: ISO 40 Quill stroke mm Feeds - longitudinal and cross mm/min Feeds - vertical mm/min Speed range max. 3150 rpm Supply voltage 380 V / 50 Hz Drive power 4 kW Bwedpotv Ia Tefx Am Isl Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Kondisi: baik (bekas), Tahun pembuatan: 1991, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 400 mm, Pergerakan sumbu x: 560 mm Pergerakan sumbu y: 500 mm Pergerakan sumbu z: 400 mm Bodpfx Aey Iw Hwjm Iswl Kontrol: TNC 360 Kecepatan spindel: 40–4.000 rpm Kebutuhan daya total: 7,5 kW Berat mesin sekitar: 2,6 t Dimensi ruang sekitar: 2,6 x 1,8 x 2,2 m

Kondisi: bekas, Tahun pembuatan: 1991, x-arah 500 mm y-arah 500 mm z-arah 400 mm Ukuran meja: 900 x 530 mm Kontrol: Heidenhain TNC 355 Dudukan: ISO 40 Rentang kecepatan putar: 40–4000 rpm Kecepatan rapid traverse: 5 / 6 m/menit Kecepatan feed: 2 – 3000 mm/menit Daya penggerak: 6 kW Kapasitas beban meja: 350 kg Dimensi (P x L x T): 2,6 x 1,8 x 2,2 m Berat: 2,6 t Mesin frais universal 3-sumbu dengan pelindung. - Handwheel eksternal - Penutup pelindung - Meja kaku Bwsdpfx Ameyxr Hms Iol - Kepala universal

Kondisi: baik (bekas), Mesin Frais Mikron WF 32 CH Data Teknis: Sumbu X: 560 mm Sumbu Y: 500 mm Sumbu Z: 400 mm Meja Penjepit Permukaan penjepitan vertikal: 300x450 mm Jumlah lubang ulir: 2 x 6 Rentang kecepatan putar: 25-6300 rpm Rentang ayun kepala frais vertikal: +45° Bwsdpoyq Hcrefx Am Iol

Kondisi: bekas, CNC tool milling machine MIKRON type WF 40C/3M with CNC path control Heidenhain TNC 310 Machine No. 440911, year of manufacture approx. 1985, overhauled and control conversion in 11/2000 Travels X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse X and Y = 5000 mm/min; Z = 4000 mm/min. Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps - Vertical milling head swivels right and left - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (read off the display) - Control cabinet fixed to the rear of the machine - Coolant system integrated in the machine base - Swivelling control panel - Wiring diagram, operating manual for the control available Required space L x W x H 2300 x 2000 x 2150 mm Bsdpfxew A Af Ie Am Iewl Weight 2900 kg In good condition

Kondisi: baik (bekas), mikron-wf32ch-description Bsdpfx Aewit Rhsm Iowl

Kondisi: bekas, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer -Manufacturer: LAPP, three-phase transformer removed from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300 VA Bwodpfx Amekzpm Ho Iel -Primary: 3x380 V -Technical data: see nameplate photo -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Kondisi: bekas, Three-phase transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer removed from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power rating: 4.5 kVA -Primary: 3x380 V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg Bwodpfx Ajkyy Uqsm Ijl

Kondisi: baik (bekas), permanent-magnet-motor-si Bwedpfx Amekxhpuo Iol

Kondisi: baik (bekas), Servo drive, servo board, input processor, control board, input board, controller, converter, controller, servo module, axis amplifier, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier Bodpfowd N S Dsx Am Iowl -Manufacturer: Bosch, fully equipped transistor amplifier from Mikron WF 51C/155 CNC milling machine -Type: TR15-XA-140-230V -Control boards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Kondisi: bekas, Inrush current limiter, soft starter, softstarter, starting current limiter, soft start reactor - Manufacturer: varimax, soft start reactor / three-phase reactor from CNC milling machine Mikron WF 51C/155 Bwedpfokzpngex Am Iel - Type: D 1515 S3 - Current rating: 10 A - Dimensions: 180/90/H190 mm - Weight: 9.5 kg

Kondisi: bekas, Tahun pembuatan: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1,500 kg O F F E R We can offer you the following ex-stock, subject to prior sale and errors: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: ca. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angular table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Infinitely variable feed XYZ 1 – 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW – 380 V – 50 Hz Weight approx. 1,500 kg Equipment / Special features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual operation • Vertical head (swiveling +/- 90°) with quill and swing-away device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angular table 450 x 800 mm mounted • Integrated coolant system, attached electrical cabinet, central lubrication • Tool cabinet with extensive set of tool holders, horizontal milling device with various horizontal arbors, additional angular milling head, various operating tools • Work lamp, central lubrication, table exchange device This machine is still a “genuine” Mikron milling machine, manufactured in proven Swiss quality. It is ideal for both toolmaking and training purposes. Bedeu U Sabspfx Am Ijwl Condition: Very good! Only used in toolmaking. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment due upon receipt of invoice A constant selection of universal and CNC milling machines of all types available from stock – Please ask for alternatives as well!

Kondisi: bekas, Tahun pembuatan: 1989, nomor mesin/kendaraan: 6766, Travel X-axis: 560 mm Travel Y-axis: 500 mm Travel Z-axis: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X-axis: 6 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 5 m/min Feed rate x/y/z - stepless: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Required space approx.: 2.6 x 1.8 x 2.2 m Bwodpfx Amocxxpqe Iel Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light

Kondisi: bekas, TECHNICAL DATA - Table dimensions: 350 x 800 [mm] - T-slots: 7 - Travel, x, y, z: 400, 400, 370 [mm] - Spindle speed: 50 - 2240 [rpm] Bjdsuhbxajpfx Am Iswl - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES - 3-axis display HEIDENHAIN - Splash guard

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 400 mm, jenis arus masuk: tiga fasa, tegangan masuk: 380 V, arus masuk: 20 A, frekuensi input: 50 Hz, Kami menawarkan mesin milling Mikron WF31D/TNC355 siap pakai ini, tahun pembuatan 1989. Pemrosesan vertikal dan horizontal Tegangan fasa: 380 V Frekuensi: 50 Hz Bwsdpfx Amjyhatlj Isl Arus: 20 A Daya: 9 kW Tegangan sirkuit kontrol: 24 V Nomor diagram: 152.34.80.805 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, jangan ragu untuk mengirimkan pesan atau menghubungi kami.

Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 30 09, Mikron WF 31 C, mesin frais CNC universal. Pengendali CNC: Heidenhain TNC 155. Berat sekitar 2300 kg. Mesin saat ini tidak terhubung dan dalam kondisi transportasi, namun dapat dipersiapkan sesuai permintaan pelanggan. Bsdpeygk Nnefx Am Iowl

Kondisi: baik (bekas), en-001 Bwodswiucfspfx Am Iel

Kondisi: siap digunakan (bekas), Verfahrweg X/Y/Z: 500mm/500mm/400mm, Tischdimensionen X/Y: 460mm/800mm, Werkzeugaufnahme: SK40, Drehzahl: 4000U/min, Vorschub: 3m/min, Eilgang: 5m/min, Gewicht: ca. 2500kg. Eine Besichtigung vor Ort ist möglich. Bwedex Tul Iopfx Am Iol

Kondisi: bekas, nomor mesin/kendaraan: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine - Clamping table: 800 x 445 mm Bwsdpfjfbma Nex Am Ijl - Travel: X/Y/Z 500/500/385 mm - Spindle taper: SK40 - Quill stroke: 90 mm - Speeds: 31.5 to 3150 rpm - Coolant system - Dimensions: 1475/1770/H2000 mm - Weight: 1966 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Mikron WF 3S with 3-axis active digital readout Heidenhain TNC 114 and infinitely variable feed Technical data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed in all 3 axes from 1-750 mm/min >> Rapid traverse in 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight: approx. 1600 kg Accessories and features: >> 3-axis active digital readout Heidenhain TNC 114 >> Centralized lubrication >> Operating manual, programming manual, electrical schematics Bwjdpfxexu Hkco Am Iel About the machine: For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain TNC 114 path control, allowing axis travel to a programmed dimension (X, Y, or Z) and automatic stop upon reaching it. Four different zero points can be set; measurements can be entered in either absolute or incremental mode. The feed rate can be adjusted steplessly from 0-750 mm/min even during milling, and rapid traverse is possible at the push of a button. Spindle speed is adjustable in steps from 50 to 2240 rpm, but only when at a standstill. The vertical milling head is mounted with three screws and can be removed or reattached in just 2 minutes. It is manually fastened using the joint arm seen on the left of the machine and simply swung aside. The standout feature of this machine is its large travel range relative to its size: Z=380 mm, X=500 mm, Y=500 mm. The machine also features electronic protection for the vertical spindle. Mechanically and electrically tested. You are welcome to inspect and test the machine on site under power.