Unit penjepitan lengkap untuk KM 350

KraussMaffei KM 350

Kondisi: bekas, Tahun pembuatan: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350/1900 C2 Year of Manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: - Opening: 105 kN - Closing: 95 kN Clamping plate dimensions (H x V): 1,060 x 1,095 mm Clear spacing (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum opening span: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry cycle time: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Rated capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard / option: 285 / 349 rpm Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle contact force: 82 kN Lhodpfx Aoxu Uvaslkjf Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour display and 3.5” floppy disk drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant design, screw diameter 70 mm with shut-off valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, Used injection molding machine directly from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection molding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5,000 kN - Distance between tie bars (H x V): 900 x 800 mm - Max. mold opening distance: 1,170 mm - Min. mold installation height: 480 mm - Opening stroke of mounting platen: 1,650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Retract: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1,742 bar - Injection volume: 1,953 cm³ - Shot weight for PS: 1,777 g - Injection flow rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Specifications - Pump connected load: 90 kW - Heating power: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As a rule, we supply this system in fully functional base condition. Additionally, as the original manufacturer, we can offer various options depending on individual requirements, such as: - Upgrades for energy optimization - Integration with KraussMaffei digital products (where applicable) - Plasticizing retrofits - Optional: Organization and provision of delivery (Not included in price) Ledpenh Rnujfx Alkehf - Optional: Installation and commissioning (Not included in price) With us, you benefit from first-class service and also have the opportunity to purchase your desired spare parts packages for wear parts to ensure uninterrupted production with your new pre-owned system. Do not hesitate to contact us with your inquiry!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, gaya penjepit: 3.500 kN, diameter sekrup: 70 mm, berat injeksi: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3,500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials such as PA, PP, PE, and ABS. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Please contact us for further details. • Shot volume: 1,097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Moving platen force: Opening 105 kN / Closing 95 kN • Max. opening stroke: 920 mm • Min. mould height: 380 mm • Max. daylight: 1,300 mm • Dimensions of mounting plates (H x V): 1,060 x 1,095 mm • Tie-bar spacing (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mould weight: 4,950 kg Lhsdpfxeyyxmvj Alkef Additional equipment • Handling system: Wittmann with the following robot travel paths (X/Y/Z): 420 / 1,200 / 2,000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Lodpfxsyv E Nvo Alkjhf Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Arburg 270 M-350-90 U Clamping force: 35 t Lodjg S I S Aspfx Alkjhf Year of manufacture: 1997 Screw diameter: 25 mm Tie bar distance: 270 x 270 mm

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), 2079916 Ljdpfexx Uf Ajx Alkjhf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 65.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.500 kN, diameter sekrup: 70 mm, volume langkah: 1.047 cm³, Clamping force: 3,500 kN Maximum mold opening force: 220 kN Movable platen drive force – open: 105 kN Movable platen drive force – close: 95 kN Mounting platen size (H x V): 1,100 x 1,095 mm Clear distance between tie bars (H x V): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Injection volume: 1,047 cm³ Shot weight (PS): 953 g Injection flow rate: 527 cm³/s Screw speed: 285 rpm Plasticizing throughput: 95 g/s Lsdpfeydmkcjx Alkshf Nozzle contact force: 110 kN Electrohydraulic equipment: Pump motor rated power: 75 kW Installed heating power: 30 kW Barrel heating zones: 6 Oil capacity: 720 l Dimensions and weights: Required floor space approx.: 6.50 x 2.20 x 2.40 m Total weight: 15,370 kg Maximum mold weight: 4,780 kg Accessories: - Anti-vibration elements Additional equipment: - 1 x hydraulic core pull - 1 x air valve - Robot interface as per Euromap 12

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, SET MESIN TIUP LINEAR PET dengan peralatan tambahan AC ARCOR - multiBlow2 - 2017 Kecepatan: 1,5L - 6000 Rongga: 4 Format: 0,1 - 3,0L PERALATAN PENDUKUNG 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. Kompresor Tekanan Rendah - SHAMAL 45kW 3. Kompresor Tekanan Tinggi - KAESER Booster N 753 - G 13 bar / 40 bar 4. Pengering Udara 5. Tangki Penampung - Tekanan Rendah - MAX 16 Bar 6. Tangki Penampung - Tekanan Tinggi - MAX 45 Bar Ljdpfxoquuvrs Alkehf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture – 2004 System: Fully hydraulic Control: MC4, colour monitor, integrated control panel, built-in disk station 2. Plasticising unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle Lsdpfx Aljx Elukekehf TECHNICAL DATA Clamping unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould installation height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard screw speed: 108 g/s Output at increased screw speed: 141 g/s Electro-hydraulic equipment Pump motor power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Boy 80M Year of manufacture: 1998 Clamping force: 80 tonnes Screw diameter: 36 mm Shot weight: 132 g Tie bar distance: 410 x 358 mm Lhsdpfomt Hh Eox Alkjf