Beli Kraussmaffei Unit Penjepitan Lengkap Untuk Km 350 bekas (66.682)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Krauss Maffei KM 350-3000 CX Injection Moulding Machine Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on an industrial real-time Ethernet computer, equipped with an integrated 19-inch control panel with a colour touch screen, LED backlighting and visualisation of all running processes (ProcessDesigner). Plasticising unit Complete plasticising unit for thermoplastics in a wear-resistant configuration, featuring an 80 mm screw diameter, non-return valve, and open nozzle. TECHNICAL DATA – STANDARD VERSION Clamping Unit Clamping force: 3,500 kN Nlodpfsy Tp Rljx Aa Ujb Opening force: 221 kN Platen dimensions (h x v): 1,060 x 1,095 mm Tie bar clearance (h x v): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95/49 kN Injection Unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1,855 bar Injection volume: 1,608 cm³ Shot weight: 1,464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticising rate: 109.5 g/s Electrical and hydraulic equipment Rated pump motor power: 75 kW Installed heater power: 36 kW Number of heater zones: 7 Dry cycle time / stroke per Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 l Dimensions and weight Net weight incl. control cabinet: 16.3 t Machine dimensions (L x W x H): 7.21 x 2.17 x 2.25 m

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), 2079916 Nledpfx Aoxx Uf Aja Ueb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture – 2004 System: Fully hydraulic Control: MC4, colour monitor, integrated control panel, built-in disk station 2. Plasticising unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould installation height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard screw speed: 108 g/s Output at increased screw speed: 141 g/s Nlsdpfx Aajx Eluks Usb Electro-hydraulic equipment Pump motor power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: bekas, Tahun pembuatan: 2019, nomor mesin/kendaraan: LC591, Technical Specifications & Performance Data This complete used bottling line is designed for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from renowned manufacturers to ensure consistent quality and uptime in industrial packaging environments. Production speed: up to 8,000 bottles per hour Compatible bottle formats: 0.33 L, 0.5 L, 0.75 L, 1.0 L, 1.5 L, 2.0 L Containers: PET and glass bottles Main filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping heads Stretch blow molder: Easy Blow 4L (4,200 bph nominal) Nledpfxoyhbibo Aa Usb Labeling machines: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bph Packaging & carry handle applicator: SMI LSK 30 T Ergon shrink wrapper, SMI Pack HA-25 SX carry handle applicator Palletizing logistics: Sinkrotech APM-6000-JU palletizer; Atlanta Mytho-A pallet wrapper; additional manual wrapper Process & utility equipment: GEA HTF 3000PIN/19 pasteurization unit; GEA CIP system; Trane Tracer CH535 CGAX/SXAX chiller; Therminus steam boiler (456 kW); Kaeser compressors (CSDX 165 and N 502-G booster) Inspection & coding: FT System for fill level/closure/label inspection; Hitachi UX printer Advanced Automation & Control Systems The line features state-of-the-art automation and quality assurance for stable operation and reproducible product quality. A PLC-controlled architecture coordinates rinsing, filling, capping, labeling, and packaging, while inline inspection and coding ensure compliance and traceability. PLC/HMI: PLC installed for central control and recipe management Inspection: FT System for fill volume, closure presence/position, and label verification Electrical: 400 V, 50 Hz, 16 A reference (at component level) Coding: Hitachi UX inkjet printer for date/batch marking Changeover: Designed for multiple bottle formats for PET and glass Safety: Standard safety guarding and emergency stop switches at each station Production Line Integration Capability Designed for flexible beverage production, the line integrates upstream preform handling and stretch blow molding with downstream conveying, labeling, and packaging. Vetromeccanica air conveyors and line conveyors ensure gentle bottle transport and buffering. Upstream: Preform conveyor and hopper, Easy Blow 4L stretch blow molder Conveyors: Vetromeccanica Eolo air and line conveyor systems Format flexibility: 0.33 L to 2.0 L for PET and glass End-of-line: Shrink wrapping, carry handle application, palletizing...

Kondisi: bekas, Filter assembly, filter unit COMPAIR for compressor systems Compressed air filter Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Threaded connection: G 1 1/2" Flow rate: approx. 8.5 m³/min Filter element no.: CE 0087B Nedpfxjhalvdo Aa Uslb - Filter housing made of aluminum Weight: 5 kg Dimensions (L x W x H): 125 x 110 x 420 mm Good condition

Kondisi: bekas, Penjepit lembaran – Klem lembaran – Penjepit serbaguna Klem balok, klem girder, alat angkat untuk transportasi lembaran secara horizontal Alat angkat untuk transportasi lembaran horizontal DOLEZYCH tipe Dolast K15 Tahun pembuatan: 1997 Nljdpoxciwzofx Aa Ujb Kapasitas angkat per klem: 3 ton Kapasitas angkat: maks. 6 ton sebagai alat angkat dua tali Rentang penjepitan: 0-51 mm Ketebalan lembaran: 4-50 mm Panjang kawat baja: 1,5 meter - Penangguhan kawat baja dua tali dengan mata - 2 buah klem angkat Berat bersih sekitar 45 kg Alat angkat ini cocok untuk mengangkat pelat baja tunggal atau paket lembaran yang dibundel. Harga per alat angkat, tersedia 2 unit.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, gaya penjepit: 3.500 kN, diameter sekrup: 70 mm, berat injeksi: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3,500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials such as PA, PP, PE, and ABS. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Please contact us for further details. • Shot volume: 1,097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Moving platen force: Opening 105 kN / Closing 95 kN • Max. opening stroke: 920 mm • Min. mould height: 380 mm Njdpfx Asyyxmvea Uolb • Max. daylight: 1,300 mm • Dimensions of mounting plates (H x V): 1,060 x 1,095 mm • Tie-bar spacing (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mould weight: 4,950 kg Additional equipment • Handling system: Wittmann with the following robot travel paths (X/Y/Z): 420 / 1,200 / 2,000 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2004, Krauss-Maffei KM 650-3500 C 1 650 t Krauss-Maffei injection moulding machine, year of manufacture 2004, with only approx. 45,000 operating hours in automatic mode. The machine is delivered overhauled. OVERHAULED MACHINE Nsdpfxshy Nnbs Aa Uolb Equipment: - 6 pneumatic cascades - 24 hot runner zones - 1 core puller on the fixed platen and 1 core puller on the moving platen - Electric screw drive Technical details: CLAMPING FORCE: 6,500 kN PLATEN SIZE: 1,540 x 1,440 mm DAYLIGHT: 1,110 x 960 mm MOULD OPENING STROKE: 1,150 mm MAX. OPENING DISTANCE: 1,750 mm SCREW DIAMETER: 90 mm MIN. MOULD HEIGHT: 600 mm YEAR OF MANUFACTURE: 2004 SHOT VOLUME: 1,953 cm³ SHOT WEIGHT: 1,777 g INJECTION PRESSURE: 1,742 bar

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm Nlsdeyv E Nvepfx Aa Ujb - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 Nlsdpfx Aex Uqa Dea Ueb

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Machine weight approx.: 32 t From series production Nljdstunccspfx Aa Ujb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 100 mm, tekanan injeksi: 1.742 batang, tinggi cetakan (min.): 600 mm, langkah pembukaan: 1.150 mm, lebar pelat: 1.440 mm, tinggi pelat: 1.490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mould opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Platen dimensions: 1,490 mm x 1,440 mm Clear distance between tie bars: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection Unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Rated pump motor power: 90 kW Installed heating capacity: 44 kW Number of barrel heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic hoses replaced 12/24 Njdpfx Aaewp Si Nj Uslb Last inspection Krauss Maffei 24.03. New screw drive (hydraulic) 25.01 New non-return valve 01/25 EQUIPMENT - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated control panel - Built-in floppy disk drive - Complete plasticising system for thermoplastics with 100 mm screw diameter, non-return valve and open nozzle

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 504212, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, jarak antara tiang: 900 mm, tekanan injeksi: 1.742 batang, tinggi pemasangan: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Distance between tie bars (h x v): 900 x 800 mm Maximum mold opening distance: 1,170 mm Minimum mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force (retraction): 48 kN Injection Unit Nljdpfow Dy Rwox Aa Ujb Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump drive power: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total nominal current (Iₙ): 306 A Motor nominal current (Iₙ): 170 A Operating voltage: 3-phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery as well as assembly and commissioning can be arranged at extra cost upon request.

Kondisi: bekas, Tahun pembuatan: 2005, Injection moulding machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Movable platen stroke force: - opening: 105 kN - closing: 95 kN Mounting platen (H x V): 1,060 x 1,095 mm Clear width (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heater capacity: 30 kW Cylinder heating control zones: 6 Dry cycling rate: 1,550 1/h Oil filling: 720 l Dimensions and Weight: Net weight incl. control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Injection unit: Shot capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard/option: 285/349 rpm Screw shaft power standard or Stage 1: 95 PS Screw shaft power option or Stage 2: 117 PS Nozzle contact force: 82 kN Nodpjxu Uvaofx Aa Ujlb Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT colour display and 3.5” floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, jam operasional: 27.000 h, gaya penjepit: 6.500 kN, Krauss Maffei KM650-3500 C2 injection molding machine for sale The machine is in very good condition, having only been operated in single-shift production for small batch and sample runs. A new hydraulic pump was installed recently (approx. 300 operating hours). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and linear guides show no damage, like new - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic barrel - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Powered inspection possible. Further accessories such as Motan dryer, chiller unit and more available upon request. Njdpfxjyn Sc Ej Aa Uslb The machine can be dismantled and loaded by us by arrangement. We look forward to your inquiry.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.000 kN, diameter sekrup: 95 mm, jarak antara tiang: 1.120 mm, tekanan injeksi: 1.795 batang, lintasan ejektor: 250 mm, Kein Mindestpreis - garantierter Verkauf zum höchsten Gebot! Nljdpfjy Ulhcjx Aa Ueb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 9.500 kN, diameter sekrup: 120 mm, lintasan ejektor: 300 mm, langkah pembukaan: 1.900 mm, DETAIL TEKNIS Gaya penutup: 9.500 kN Gaya buka: 665 kN Jarak antar pilar: 1.400 x 1.150 mm Pelat penjepit: 1.960 x 1.710 mm Stroke pembukaan: 1.900 mm Tinggi cetakan minimum: 500 mm Tinggi cetakan maksimum: 1.200 mm Lebar pembukaan maksimum: 2.400 mm Stroke ejector: 300 mm Sekrup berkapasitas tinggi HPS-UN, diameter: 120 mm Nodpfx Aoy T H A Eja Uslb Radius nosel: 30 mm Bukaan nosel: 12 mm Diameter sekrup: 120 mm Berat tembakan (HDPE): 5.420 g Volume tembakan: 7.634 cm³ Tekanan injeksi spesifik: 2.257 bar DETAIL MESIN Dimensi & Berat Dimensi (P x L x T): 12.770 x 3.420 x 2.750 mm Berat mesin: 61,5 t

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 424227, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, tekanan injeksi: 1.829 batang, berat injeksi: 1.304 g, langkah pembukaan: 1.400 mm, de-to-hu-it-lt Nlsdpfxjy T Hwij Aa Uob

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 8.500 kN, diameter sekrup: 135 mm, jarak antara tiang: 1.140 mm, lintasan ejektor: 300 mm, TECHNICAL DETAILS Clamping force: 8,500 kN Mold opening force: 560 kN Platen dimensions (h x v): 1,600 mm x 1,600 mm Tie bar spacing (h x v): 1,140 mm x 1,140 mm Maximum daylight opening: 1,600 mm Mold height (min-max): 500 mm – 1,100 mm Maximum opening stroke: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Shot weight for PS: 6,098 g Injection rate: 1,414 cm³/s MACHINE DETAILS Electro-hydraulic equipment Pump motor rated power: 132 kW Nsdpfoy T Hmkex Aa Ujlb Dry cycle time according to Euromap 6: 965 1/h Hydraulic tank capacity: 2,440 l Open nozzle with nozzle radius: 25 mm Nozzle opening: 9 mm Dimensions & Weight Installation space (L x W x H): 11.72 m x 2.92 m x 2.71 m Net weight with control unit: 49 t EQUIPMENT Krauss Maffei robot LRX 500 MC 5 control system with color monitor Integrated control panel and USB data storage Complete plasticizing unit for thermoplastics Non-return valve

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 11.000 kN, diameter sekrup: 120 mm, tekanan injeksi: 1.758 batang, berat injeksi: 6.175 g, langkah pembukaan: 2.000 mm, KraussMaffei KM 1100–12000 MX incl. WITTMANN Robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Mold height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s MACHINE DETAILS Electrohydraulic configuration Nedpfxjy T Hd No Aa Uolb Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating zones at cylinder: 7 Dry cycles (Euromap): 802 1/h Oil tank capacity: 2,440 l Dimensions & Weight Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight incl. control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel, and three USB ports

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 44731, gaya penjepit: 500 kN, diameter sekrup: 25 mm, jarak antara tiang: 320 mm, berat injeksi: 47 g, tinggi cetakan (min.): 200 mm, langkah pembukaan: 550 mm, panjang total: 4.000 mm, lebar total: 1.163 mm, tinggi total: 1.787 mm, berat keseluruhan: 2.300 kg, frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 58 A, Please refer to the pictures and video for the condition and contents of the offer. The system is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Please visit our website to view our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Nlodox Srggepfx Aa Uob Deviations from technical specifications as well as errors in the item description may occur and are reserved.

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 22 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61035145, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, volume langkah: 393 cm³, tekanan injeksi: 2.429 batang, berat injeksi: 140 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 120 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 450 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 6.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we are offering our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry solution for all-electric injection moulding, enabling quick and innovative responses to market demands. It combines high performance, simple operation, and short delivery times. The machine is suitable for a wide variety of applications, including packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine concept – Fast and reliable delivery due to the base machine concept featuring a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, Year 2013) CONTROL Nlodpfx Ajy Rmwdoa Ujb - MC P1 with 15'' TFT colour display featuring multi-touch functionality CLAMPING UNIT - Clamping force: kN 1200 - Maximum mould opening force: kN 180 - Clear space (h x v): mm 520 x 470 - Mounting platen dimensions (h x v): mm 690 x 640 - Minimum–maximum mould height: mm 180–450 - Maximum opening stroke: mm 850 - Maximum mould opening travel: mm 450 - Ejector drive: electric - Ejector stroke: mm 120 - Ejector force fwd/rev: kN 27 / 33 - Ejector speed fwd/rev: mm/s 300 / 300 - Maximum mould weight: kg 850 INJECTION UNIT - Screw diameter / type: mm 35 / standard - Effective L/D ratio: 22.9 - Injection pressure: bar 2429 - Shot volume: cm³ 154 - Shot weight at max. stroke for PS: g 140 - Injection speed: mm/s 200 - Injection rate: cm³/s 192 - Screw speed: rpm 374 - Plasticising rate (standard screw): g/s 18.9 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 22.7 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight including control cabinet: t 6.7 - Length x width x height: m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve: single (BWAP) - Pneumatic control for hot runner shut-off: single - Electrical interface for pneumatic cascade: 4-fold - Euromap interfaces for automation: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold: 4-fold - Electrical prewiring for external hydraulic unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding function - Graphic analysis package - Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 1.609 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61008195, gaya penjepit: 800 kN, diameter sekrup: 40 mm, jarak antara tiang: 420 mm, volume langkah: 201 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 183 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 750 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g, Injection moulding machines direct from the manufacturer! As a manufacturer, KraussMaffei offers you our inspected and flexible stock machines: The fully hydraulic CX series features an especially compact, efficient, and flexible two-platen machine. The highly compact two-platen design with cantilevered clamping unit provides generous space for peripheral equipment and optimal accessibility. An efficient and intelligent energy management system with BluePower servo drive further offers a powerful basis to meet the highest demands, ensuring the right solution for any application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display with multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Maximum mold opening force: kN 55 - Clear space between tie bars (H x V): mm 470 x 420 - Mounting platen size (H x V): mm 670 x 670 - Minimum/maximum mold height: mm - Maximum opening stroke: mm 750 - Maximum mold opening travel: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force fwd/back: kN 23 / 10 - Ejector speed fwd/back: mm/s 760 / 800 - Max. mold weight: kg 1000 Nlsdpfx Aasy Rlmws Uob INJECTION UNIT - Screw diameter/type: mm 40 / Standard (customization possible) - Effective L/D ratio: 20 - Injection pressure: bar 1,860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow rate: cm³/s 126 - Screw drive/rotation speed: 1/min 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phases with neutral WEIGHT & DIMENSIONS - Net weight with control cabinet: t 3.55 - L x W x H: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control circuit for nozzle heating - 1-way air valve (BWAP) - Pneumatic hot runner shutdown control, 1-way - Hydraulic core pull, 1-way (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression function - Graphic analysis package The machine is located at our facility in Parsdorf and is available at short notice. Additional options are available upon request. We look forward to your inquiry.

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 98.806 h, gaya penjepit: 40.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 255.000 kg, de-EN-20240617-km4000-sales-ad Nsdpfx Asyt Hy Noa Uslb

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 99.161 h, gaya penjepit: 32.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 230.000 kg, sales-description-kraussmaffei-injection-molding-machine Nledpfsyt H Dhjx Aa Uob