Mesin cetak injeksi

KraussMaffei KM 800 - 8100 MX

Kondisi: baik (bekas), Tahun pembuatan: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV – Injection unit regulation. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit Complete plasticising system for thermoplastics with a 135 mm screw diameter, non-return valve, and open nozzle Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm Dedpfx Alotrya Royowa - Tie bar spacing (H x V): 1140 x 1140 mm - Mold opening stroke: 1,600 mm - Mold height (min - max): 500 – 1,100 mm - Daylight opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Pump motor rated power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation footprint (L x W x H): 11.72 x 2.92 x 2.71 m

Kondisi: baru, *Technical Standard Specification: Dodpfxjftm Hro Alyowa Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Merek: Mori Seiki Tipe: NT3200 Tahun pembuatan: 2007 Nomor seri: NT320GA0030 Informasi tambahan: Waktu operasi: 7976 jam Diameter pemesinan maksimum (kepala frais): 600mm Diameter pemesinan maksimum (turret): 210mm Panjang pemesinan maksimum: 500mm Diameter spindel: 67mm Jumlah ruang perkakas: 40 Spindel: Kitagawa SS1666 Kecepatan spindel: 5000 RPM Sistem kontrol: Fanuc Seri 31i Dilengkapi dengan: alat penyetel perkakas, filter kabut oli Absolent AB, konveyor serpihan Enomoto, filter pendingin Ercoatius, dokumentasi Kepala frais Kecepatan maksimum: 12000 RPM Ukuran poros perkakas: C5 Jarak sumbu X: 685mm Jarak sumbu Y: ±125mm Jarak sumbu Z: 1075mm Dsdoxn Ddtjpfx Alyewa Jarak sumbu B: ±120° Pergerakan cepat sumbu X/Z: 50 m/menit Pergerakan cepat sumbu Y: 30 m/menit Turret Jumlah tempat perkakas: 12 Kecepatan perkakas: 6000 RPM Jarak sumbu X: 130mm Jarak sumbu Z: 970mm Pergerakan cepat sumbu X/Z: 30 m/menit Dimensi mesin (P x L x T): 5200x3100x3000mm Berat sendiri: 14400 kg Termasuk pengumpan batang Merek: Iemca Tipe: VIP 80E II Tahun: 2007 Nomor seri: 020710QA07 Berat sendiri: 605 kg Kapasitas batang: 6-80mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 6.200 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control unit. Screw diameter: 75 mm. Extras: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The machine is delivered RE-Conditioned by the technical expert team of UK Transitus. Optionally, we can offer on-site commissioning at the customer's facilities, ensuring reliable operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ SHOT WEIGHT: 1126 g Dwodewq D Efepfx Alyea MAX. PLATEN DISTANCE: 1400 mm MIN. MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm TIE BAR DISTANCE: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6,282

Kondisi: baru, *TECHNICAL SPECIFICATION: Heating capacity hot circuit: 48 kW Heating capacity cold circuit: 12 kW Cooling capacity hot circuit: 42 kW Cooling capacity cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions LxWxH: 1,395 x 753 x 1,180 mm Weight approx. 580 kg *FEATURES HIGHLIGHTS: -Control and regulation via PLC with touch screen -Heating via Incolloy stainless steel tubular heaters -Heating control via solid state relay -Control cabinet IP54 with forced ventilation -Electrical wiring on terminal blocks -Potential-free input for signal to switch between hot/cold (front door) -Potential-free contact for collective alarm on 3-pin connector (front door) -Temperature control unit with heating and cooling circuit, designed for connection to a valve station for rapid switching between hot and cold circuits -Temperature-controlled feeding of return water -Level monitoring with automatic level compensation -Dirt filter in cooling water inlet and in the return of the circulation system -Separate automatic filling with dirt trap -Flow measurement based on differential pressure in both circuits -Heating element surface monitoring via temperature sensor Dedpfxsg Ey Ufo Alyjwa -System pressure regulation, required compressed air connection: 6 to 8 bar -Booster pump type DS 360 for make-up water supply -Corrosion-resistant components (stainless steel, brass) -Unit mounted on castors and ready for connection *OPTIONS: -EcoTemp system for intermittent operation -Connection for external temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with the European directives. Other regulations and standards are only fulfilled if indicated in the order confirmation. This technical specification reflects the standard equipment; customer-specific options differing from the standard will be specified in offers or order confirmations.

Kondisi: siap digunakan (bekas), Pusat pemesinan vertikal Mori Seiki MV-Junior... Magasin alat untuk 30 unit, perjalanan sumbu X: 560 mm; Y: 410 mm; Z: 460 mm, ukuran meja: 900x450 mm, beban maksimal di meja: 300 kg, kecepatan maksimum spindle: 8.000 rpm, berat total: 3.900 kg Dsdpsx I D Syjfx Alyewa

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 800 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.250 kN, gaya ejektor: 25.000 N, Semua mesin CNC FANUC Roboshot sepenuhnya ELEKTRIK -garansi -hanya 800 jam pemakaian FANUC Roboshot S100iB 2024 Gaya penjepit: 125 ton Diameter sekrup: sesuai spesifikasi pelanggan Semua perlengkapan tambahan dapat dikonfigurasi sesuai kebutuhan pelanggan dan dapat diupgrade untuk aplikasi khusus. Perlengkapan opsional tambahan: Dwjdpfx Aleya D I Doyja -Katup sortir FIBER (untuk pemisahan produk baik dan reject) -Pengontrol runner panas (terintegrasi dan terhubung ke mesin) -V-gate -Soket listrik tambahan -Kopling cepat listrik untuk pergantian mould yang cepat -Sistem perpipaan air -Sistem Mouldflo untuk pemantauan digital aliran, suhu, dan tekanan air -Elevasi mesin sebesar 100 mm -Unit tenaga hidrolik untuk inti samping (2CH / 4CH) -Robot (robot kartuzy STAR) -Robot (robot FANUC 6-axis) -dan lainnya Mesin ini tersedia untuk Slovenia, Kroasia, Bosnia dan Herzegovina, serta Serbia.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 1.067 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, berat keseluruhan: 6.850 kg, jumlah slot dalam magazin alat: 24, jumlah sumbu: 3, Hurco VMX 42i 3-sumbu ini diproduksi pada tahun 2013 dan memiliki perjalanan sumbu X 1067 mm, sumbu Y 610 mm, serta sumbu Z 610 mm, dengan holder alat SK40. Jika Anda mencari mesin milling berkualitas tinggi, pertimbangkan Hurco VMX 42i yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Jam spindle: sekitar 12.603 jam • Total kebutuhan daya: sekitar 28 kVA Perlengkapan tambahan • Konveyor serpihan Dwjdpsy Tw Ryjfx Alyoa • Sistem pendingin internal Spesifikasi teknis Ukuran tirus SK 40

Kondisi: baik (bekas), Tahun pembuatan: 2016, Hubungi untuk informasi lebih lanjut Dwedpey Enr Sjfx Alyja

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. pump pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Process media connection: Flange DN40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control unit: Smart Controller (7" touchscreen display) - Heating control via solid-state relays - Control cabinet IP54, forced ventilation - Expansion tank, heater, and piping in stainless steel - Heating with Incolloy stainless steel tubular heaters - Strainer (circulation) - Unit ready for connection, mounted on castors (2 steerable and braked) - Cooling and filling controlled by solenoid valve - Configurable automatic filling via cold water intake or separate connection (factory-set via cooling water inlet) - Flow measurement via differential pressure principle - Level monitoring with magnetic float switch - Automatic temperature-dependent system lock (not on WP7-90) - Flow monitoring by flow detection - Bypass between supply and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return of the circulation system - Continuous bypass of the heat exchanger via 3-way motorized mixing valve (WP7-180/200) - System pressure monitoring via pressure transmitter in the expansion tank (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional otherwise) - Safety temperature limiter (STB) in heater and supply line (WP7-200) - Manometer in supply line at the rear of the unit - Circulation circuit insulated (WP7-150/180/200) Visit our website for more details or for other performance classes. Djdog Ey T Ejpfx Alyowa *This unit is compliant with European directives. Other directives and standards are fulfilled only if specified in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements differing from the standard will be specified in quotations or order confirmations.