Unit Pendingin Suhu (TCU)
Single Water Advanced WP7

Name: Single Water Advanced WP7
Brand: Single
Availability: InStock

Kondisi

Baru

Lokasi

Hochdorf

Unit Pendingin Suhu (TCU) Single Water Advanced WP7

Tampilkan peta

Data mesin

Nama mesin:: Unit Pendingin Suhu (TCU)

Pabrikan:: Single

Model:: Water Advanced WP7

Kondisi:: baru

Harga & Lokasi

Lokasi:: Ostring 17-19, 73269 Hochdorf, Deutschland

penyewaan:: dimungkinkan

Hubungi

Rincian penawaran

ID iklan:: A6050776

Nomor referensi:: Water Advanced WP7

Pembaruan:: terakhir pada 21.11.2024

Deskripsi

TECHNICAL SPECIFICATION:

Heating capacity: up to 54 kW
Cooling capacity: up to 300 kW
Medium: Water up to 200°C
Maximum external volume: 43 l at 200°C

Max. flow rate: up to 230 l/min
Max. pump pressure: up to 8.3 bar
Motor power: up to 3 kW
Dimensions (LxWxH): 1,460 x 525 x 1,200 mm
Weight: approx. 330 kg
Process media connection: Flange DN40 (DIN EN 1092-1), Form B1

EQUIPMENT HIGHLIGHTS:
- Control unit: Smart Controller (7" touchscreen display)
- Heating control via solid-state relays
- Control cabinet IP54, forced ventilation
- Expansion tank, heater, and piping in stainless steel
- Heating with Incolloy stainless steel tubular heaters
- Strainer (circulation)
- Unit ready for connection, mounted on castors (2 steerable and braked)

- Cooling and filling controlled by solenoid valve
- Configurable automatic filling via cold water intake or separate connection (factory-set via cooling water inlet)
- Flow measurement via differential pressure principle
- Level monitoring with magnetic float switch
- Automatic temperature-dependent system lock (not on WP7-90)
- Flow monitoring by flow detection
- Bypass between supply and return with reduced cross-section
- Dirt filters in cooling water supply, filling, and return of the circulation system
- Continuous bypass of the heat exchanger via 3-way motorized mixing valve (WP7-180/200)
- System pressure monitoring via pressure transmitter in the expansion tank (WP7-150/180/200)
- Booster pump for system filling (WP7-180/200, optional otherwise)
Djdpfxjg Ey T Ej Abhocc
- Safety temperature limiter (STB) in heater and supply line (WP7-200)
- Manometer in supply line at the rear of the unit
- Circulation circuit insulated (WP7-150/180/200)

Visit our website for more details or for other performance classes.

*This unit is compliant with European directives. Other directives and standards are fulfilled only if specified in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements differing from the standard will be specified in quotations or order confirmations.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2020

8 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 170 6... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin pengemas thermoforming / blister AUTOVAK M320

Braunschweig

10.991 km

Mesin pengemas thermoforming / blister
AUTOVAKM320

Hubungi

Tahun pembuatan: 2022, Kondisi: baru, nomor mesin/kendaraan: AM00222071301-01-01, Manufacturer: AUTOVAK Model: M320 Main material: Stainless steel Dimensions: 3,550 mm x 1,050 mm x 2,300 mm Weight: approx. 1,200 kg Power supply: 3 x 400 V + N + PE / 50/60 Hz Compressed air supply: Pressure min. 6 bar, 500 L/min (without printer) Top film width: 305 - 310 mm Core diameter (top film): 3" Roll diameter (top film): 400 mm Bottom film width: 322 +/- 1 mm Dsdepfcd Ajpfx Abhocc Core diameter (bottom film): 3" Roll diameter (bottom film): 300 mm Cutting size: 130 x 100 mm Draw depth: 15 mm Loading area length: 450 mm Installed power: 15 kW Noise level: Under 72 dB Production speed: 3 ~ 10 cycles/min Equipment: Forming tool for 3 blisters per cycle, each with easy-open corner; Internal dimensions: 105 mm x 75 mm x 15 mm Condition: As new (demonstration model)

Lihat detail

Iklan kecil

Bienne

11.333 km

Mesin gerinda silinder
StuderS30

Hubungi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, jam operasional: 50 h, nomor mesin/kendaraan: 3018-04, Manufacturing origin: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Dcodpfsw T Sd Tjx Abhec Travel: 700 mm LONGITUDINAL SLIDE Max. travel: SpW+50 mm Minimum automatic travel: 1.5 mm Speed: 50-5500 mm/min Reversal dwell: 0-6 sec. Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for the table and workhead CROSS SLIDE Maximum travel: 300 mm Rapid traverse: 60 mm Infeed depth (diameter): 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Incremental feed: 0.001-0.05 mm WHEELHEAD Left wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670/2,110 rpm Internal grinding spindle unit with belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Infinitely variable spindle speed: 30-1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Max. permissible load for chuck work: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill travel: 35 mm Precision adjustment for cylindrical correction: ±40 µm TECHNICAL PERFORMANCE: GUARANTEED WORKING ACCURACY Straightness of generatrix over 630 mm: 0.003 mm Roundness in chuck work: 0.0003 mm CONNECTION VALUES Max. power consumption: 13 kVA Permissible voltage fluctuation: -15% / +10% Permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar All technical data provided without guarantee; subject to errors or omissions.

Lihat detail

Iklan kecil

Mesin cetak injeksi Engel DUO 17060/2000

Wrocław

10.574 km

Mesin cetak injeksi
EngelDUO 17060/2000

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. daylight between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and Cooling: Installed power of main drives: 265 kW Hydraulic tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Dsdpfx Abew Aw Tashocc Robot fully integrated with the machine – operated from the machine control panel Machine in excellent technical condition – latest generation of ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, white goods, technical applications). The machine remains powered and can be tested on site. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operational videos, technical documentation, and arrange a convenient viewing time.

Lihat detail

Iklan kecil

DEREK OVERHEAD 16 TON Stahl SHR6040-204/1L2

Calcinato

11.134 km

DEREK OVERHEAD 16 TON
StahlSHR6040-204/1L2

Hubungi

Iklan kecil

Pusat permesinan universal DMG DMU 200 P

Remscheid

11.242 km

Pusat permesinan universal
DMGDMU 200 P

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2002, Pusat Pemesinan Universal Tipe mesin: DMG DMU 200 P Kontrol: Heidenhain TNC 430 M Tahun pembuatan: 2002 DATA TEKNIS: Perjalanan sumbu: Sumbu X: 1.800 mm Sumbu Y: 2.000 mm Sumbu Z: 1.100 mm Sumbu B: 0,001° Sumbu C: 0,001° Jumlah sumbu yang dikendalikan: 5 Rentang putaran: 10.000 rpm Daya penggerak: 44 kW Taper alat: SK 50 Changer alat Slot alat: 60 Meja putar NC Dsdpjxuqn Sefx Abhjcc Ukuran meja: 1.700 x 1.400 mm Beban maksimum meja: 5.000 kg Fitur perlengkapan: Konveyor serbuk Pendingin internal (IKZ): 40 bar Filter pita kertas Probe pengukur Handwheel elektronik

Lihat detail

Iklan kecil

UNIT PENCUCI ULTRASONIK YANG TIDAK MUNGKIN INTERSONIK SONDA

Hadımköy

9.632 km

UNIT PENCUCI ULTRASONIK YANG TIDAK MUNGKIN
INTERSONIKSONDA

Hubungi

Tahun pembuatan: 2023, Kondisi: baru, SONDA ist eine wirtschaftliche Lösung, um eine Ultraschall-Reinigungseinheit zu erhalten. Wenn Sie bereits über einen eigenen Edelstahltank verfügen und diesen in eine Ultraschall-Wascheinheit umwandeln möchten, ist SONDA die ideale Wahl. Wir können SONDA-Einheiten unabhängig von den Abmessungen fertigen. Teilen Sie uns einfach die Maße Ihres Tanks mit, und montieren Sie die Einheit mit wenigen Handgriffen an Ihrem Tank. Funktionsprinzip - Jede einzelne, eintauchbare SONDA-Einheit arbeitet mit einem eigenen Hochfrequenzgenerator. - Die eintauchbaren SONDA-Einheiten sind zur einfachen Befestigung an der Tankwand vorbereitet. - Besonders geeignet für große Tanks im Bereich Beschichtung und Oberflächenbehandlung. Eintauchschwinger, Ultraschallreiniger, Schwinger, Ultraschall Für technische Details stehen wir Ihnen gerne zur Verfügung. Dcedjd I E Ivepfx Abhoc

Lihat detail

Iklan kecil

Mesin penggilingan tempat tidur ANAYAK VH Plus 4000-HS

Haaksbergen

11.252 km

Mesin penggilingan tempat tidur
ANAYAKVH Plus 4000-HS

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.700 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (min.): 6.000 rpm, lebar meja: 1.100 mm, panjang meja: 4.200 mm, kecepatan rotasi (maks.): 6.000 rpm, Kontrol Heidenhain iTNC 530 Penukar alat untuk 60 alat Kepala universal otomatis, 0,02 derajat pada kedua sumbu Dcodpfx Abew Ngd Tjhec Mesin akan direkondisi pada tahun 2025

Lihat detail

Iklan kecil

Mesin penggilingan kolom bepergian SHW PowerSpeed 5 - Heidenhain iTNC 530

Ellwangen (Jagst)

11.084 km

Mesin penggilingan kolom bepergian
SHWPowerSpeed 5 - Heidenhain iTNC 530

Hubungi

Kondisi: diremaj di bengkel (bekas), jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, kecepatan rotasi (maks.): 6.000 rpm, kapasitas tangki: 1.200 l, EN: SHW Powerspeed 5 Travel distances • X-axis (bed): 10,000 mm • Y-axis (ram): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Dcsdpfov Dhw Tox Abhsc Universal milling head in orthogonal design • Milling head rotation range tool holder: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Conveyor length: 10,000 mm Coolant system • Tank capacity: 1,200 liters Please note: The images are sample images for comparison purposes only About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main area of expertise is tool milling machines. Our services include spare part deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metalworking mill - used CNC mill - CNC milling machines - CNC mills - large part machining - CNC large part machining - milling - shw - PS5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Lihat detail

Iklan kecil

Konventionelle Schleifmaschine - RSM 500 A Knuth RSM 500 A

Wasbek

10.999 km

Konventionelle Schleifmaschine - RSM 500 A
KnuthRSM 500 A

€21.900

harga tetap ditambah PPN

Hubungi

Kondisi: baru, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machine category, distinguished by its robust construction and extended, supportive guideways. Its heavy machine base made of high-quality cast iron provides maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed ensure smooth operation, while large scale dials on the X-axis handwheel facilitate accurate infeed. These features are complemented by a standard position display with linear scales, allowing straightforward monitoring of actual values. Versatile applications such as internal and external cylindrical grinding as well as taper grinding are supported by the hydraulically adjustable workhead. The standard delivery includes comprehensive accessories, such as an internal grinding device and a work lamp. Benefit from the high performance and precision of the RSM 500 A – inquire now and optimize your grinding projects! Dcedpfxencdx No Abhoc

Lihat detail

Iklan kecil

Mesin EDM kawat Fanuc Robocut Alpha C800iB

Turki

9.661 km

Mesin EDM kawat
FanucRobocut Alpha C800iB

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, berat benda kerja (maks.): 3.000 kg, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 510 mm, tinggi benda kerja (maks.): 510 mm, lebar benda kerja (maks.): 1.250 mm, panjang benda kerja (maks.): 975 mm, berat kosong: 4.200 kg, Perlengkapan: unit pendingin, Fanuc Robocut C800iB – Yıl 2017 Fanuc’un en büyük tel erozyon (EDM) tezgahı AWF Otomatik Tel Bağlama Sistemi Türkçe Kontrol Ünitesi – Dokunmatik Ekran Fanuc Link i Uzaktan Kumanda Su Soğutucu Çekirdek Parça Tutucu Çift Servo Tel Gergi Kontrolü Dcedpfx Abexfaqkohjc Termal Kompanzasyon Fanuc Yeni Seri 15” Dokunmatik Ekran ve Türkçe Kontrol Ünitesi Standart yeni güç kaynağı ile 5 kesim yapabilir ve 0,30 mikron yüzey kalitesine ulaşabilir. Yeni alt kafa tasarımı ve körükle korunmuş alt kafa borusu. Çift servo tel gergi kontrolü, kesim esnasında tel gergisinin sürekli olarak stabil kalmasını sağlayarak daha hassas kesimler elde edilmesine yardımcı olur. Gelişmiş AWF2 sistemi, telin kopma noktasında yeniden bağlanmasına olanak tanır. Program aktarımı ve uzaktan kontrol CF kart, USB, RS232C ve Ethernet üzerinden gerçekleştirilebilir. Standart Donanım Özellikleri Maksimum iş parçası bağlama boyutu (mm): 1250 x 975 x 500 mm Maksimum iş parçası ağırlığı (kg): 3000 kg X-Y ekseni hareketi (mm): 800 x 600 mm Z ekseni hareketi (mm): 510 mm U-V ekseni hareketi (mm): 200 x 200 mm Maksimum kesim açısı (°/mm) standart: ±30° / 150 mm Maksimum kesim açısı (°/mm) opsiyonel: ±45° / 70 mm Minimum eksen hareketi (mm): 0.0001 Tel çapı (mm): Ø 0,1 ~ Ø 0,30 Maksimum tel ağırlığı (kg): 16 kg Taban ölçüleri (mm): 2900 × 3260 mm Makine ağırlığı (kg): 4200 kg Kontrol ünitesi: FANUC

Lihat detail

Beriklan di sini