Mesin cetak injeksi

KraussMaffei KM 850 - 6100 MX

Kondisi: bekas, Etek stretch blow moulding machine ISBM Line = Injection Stretch Blow Moulding Stretch blow moulding machine for single-use PET bottles made from PET preform blanks Stretch blow moulding machine for rotary table production process Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Hjdpfekucxljx Adcew Year of manufacture: 2012 Power rating: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6,000 kg As-new condition

Kondisi: baik (bekas), Kugelstrahlanlage mit Haken, 1800 x 2500 mm, mit motorisiertem Haken und Kran Hersteller: SIRSI Typ: Hakenstrahlanlage Max. Werkstückdurchmesser: 1.800 mm Max. Werkstückhöhe: 2.500 mm Max. Werkstückgewicht: 3.000 kg Hebekapazität der Maschine: 1x 3.000 kg Anzahl der Turbinen: 3 Turbinentyp: 360 Turbinenraddurchmesser: 360 mm Leistung je Turbine: 3x 7,5 kW Hedowrxczspfx Adcow Max. Turbinendurchsatz: Transportbahntyp: I-Profil Reinigertyp: Luftabscheider (airwash) Fundament erforderlich: JA Gehäuseschutz: Mangan + Gummi Filter: JA Gesamtbreite der Maschine: Gesamthöhe der Maschine: Gesamtlänge der Maschine:

Kondisi: baru, Tahun pembuatan: 2026, We offer you: Wall paint booth TPW1515 Working dimensions (mm): 1500 (W) x 800 (D) x 1500 (H) Overall dimensions (mm): 1800 (W) x 1200 (D) x 2200 (H) Standard equipment: • Fan power: 1.5 kW • Capacity: 8,640 m³/h • Compression: 930 Pa • Lighting: 2 x 36 W • Explosion-proof ex-fan • 3-stage air filtration • Paint stop filter • Filter fleece • Control panel IP 66 • Hermetic lighting IP 65 Our booths are characterized by very high manufacturing quality, operational safety, and customization of booth parameters to your current setup. We provide expert advice for the selection of spray booths, dedusting systems, extraction units, and industrial heat recovery solutions. Hodpfx Adsg Sikrocjw CHOOSE BUMEX SP. Z O.O. Very high quality of machinery offered on the market. Professional consultation and service. Warranty coverage. In-warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All products from BUMEX SP. Z O.O. are certified with a WE certificate. We offer our own transport service – prices are agreed individually for each offer. We issue invoices with VAT shown separately. Short lead times! Possibility to order machines in various, customized configurations and dimensions! Please do not hesitate to contact us.

Kondisi: baik (bekas), Manufacturer: Thyssen / Krupp Model: KHP 130 /125 Equipped with 200 kW drive. Rotor diameter: 1,300 mm Rotor width: 1,250 mm Infeed opening: 1,370 x 990 mm Detailed information available in the PDF below. Included: – Infeed chute – Hydraulic opening system New spare parts in stock. Hodpog I R Rujfx Adcjw

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 113 kW (153,64 hp), jenis pendinginan: air, berat keseluruhan: 943 kg, lebar total: 2.100 mm, panjang total: 2.270 mm, tinggi total: 1.330 mm, kapasitas pemanasan: 117 kW (159,08 hp), Perlengkapan: kompresor, Chiller/pompa panas udara bekas Carrier 30 RQS 120 berpendingin udara dengan R410A. Lengkap dengan 3 kompresor scroll Copeland ZP182KQE-TFD-604, penukar panas yang diperkuat, kipas Carrier PM 100-110mm – 50 Hz – 0,53/0,18 kW – 720/500 RPM, receiver Mecasem OOPSG001171100C dengan volume 23,5 liter, serta panel kontrol dengan display Carrier Pro-Dialog+. Spesifikasi Merk: Carrier Hsdpfx Adorlk E Nocew Tipe: 30 RQS 120 Tipe produk: Chiller Air / Pompa Panas Refrigeran: R410A Berat: 943 kg Dimensi: 2270x2100x1330 mm (PxLxT) Kompresor: 3 Copeland ZP182KQE-TFD-604 Display: Carrier Pro-Dialog+ Jumlah kipas: 2 Spesifikasi kipas: 50 Hz – 0,53/0,18 kW – 720/500 RPM Tahun pembuatan: 2013 Jumlah stok: 1

Kondisi: sangat baik (bekas), Double pump for Krauss Maffei machines Voith Rexroth variable displacement pumps, triple SY2DFE1-21/071-071 Hjdpfx Adeg I Uycscsw KM No. 6441936 MNR: R900751978 Photos are sample images; pumps may differ in color!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 28.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, manufactured by KraussMaffei, model KM 130-750 CX. The machine is in excellent condition, immediately operational, and has low operating hours. It features an electronic injection and dosing unit, along with a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2*50 mm additionally) Core pull: 1*Hydraulic Needle shut-off: Pneumatic Tie bar extension: 160 mm Cavity pressure sensor Selector valve Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are subject to VAT. Hsdpeu Hxm Uofx Adcow Inspection possible by appointment. Contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery Buying & Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Kondisi: baru, *TECHNICAL SPECIFICATION: Heating capacity hot circuit: 48 kW Heating capacity cold circuit: 12 kW Cooling capacity hot circuit: 42 kW Cooling capacity cold circuit: 270 kW Hjdpfxjg Ey Ufe Adcjw Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions LxWxH: 1,395 x 753 x 1,180 mm Weight approx. 580 kg *FEATURES HIGHLIGHTS: -Control and regulation via PLC with touch screen -Heating via Incolloy stainless steel tubular heaters -Heating control via solid state relay -Control cabinet IP54 with forced ventilation -Electrical wiring on terminal blocks -Potential-free input for signal to switch between hot/cold (front door) -Potential-free contact for collective alarm on 3-pin connector (front door) -Temperature control unit with heating and cooling circuit, designed for connection to a valve station for rapid switching between hot and cold circuits -Temperature-controlled feeding of return water -Level monitoring with automatic level compensation -Dirt filter in cooling water inlet and in the return of the circulation system -Separate automatic filling with dirt trap -Flow measurement based on differential pressure in both circuits -Heating element surface monitoring via temperature sensor -System pressure regulation, required compressed air connection: 6 to 8 bar -Booster pump type DS 360 for make-up water supply -Corrosion-resistant components (stainless steel, brass) -Unit mounted on castors and ready for connection *OPTIONS: -EcoTemp system for intermittent operation -Connection for external temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Visit our website for more details or for other performance classes. *This unit complies with the European directives. Other regulations and standards are only fulfilled if indicated in the order confirmation. This technical specification reflects the standard equipment; customer-specific options differing from the standard will be specified in offers or order confirmations.

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: LC647, Mesin pengisi Sidel bekas untuk air, PET 36000 BPHSpesifikasi teknis dan data kinerjaLini pengisian bekas ini adalah sistem PET yang sangat efisien untuk air mineral, yang dirancang untuk pengemasan industri dan produksi minuman. Dirancang untuk format 0,55 L dan penutup 30/25 PCO1881, lini ini menghasilkan output nominal 36.000 botol per jam. Komponen utama meliputi mesin peregangan dan peniup Sidel SBO20 dengan 20 rongga, blok pengisi Sidel EUROPA WM dengan 60 katup pengisi dan 15 kepala penutup, serta mesin pelabel Krones Contiroll HS untuk pelabelan berkelanjutan berkecepatan tinggi. Lini ini merupakan solusi bekas yang kuat untuk produsen yang ingin meningkatkan operasi air PET mereka dengan keandalan yang terbukti.Kecepatan produksi: 36.000 botol per jam (format desain 0,55 L)Format utama: 0,55 L (550 ml) botolPenutup: 30/25 PCO1881Wadah: Botol PETMesin peregangan dan peniup: Sidel SBO20, 20 ronggaBlok pengisi: Sidel EUROPA WM, 60 katup / 15 kepala penutupMesin pelabel: Krones Contiroll HSPenyalur penutup: Sidel Aidlin 24 penyalur penutupTahun pembuatan lini: 2012 (unit pengisi inti 2011)Otomatisasi dan kontrol tingkat lanjutLini ini mengintegrasikan kontrol yang disinkronkan antara mesin peregangan dan peniup, blok pengisi, penyalur penutup, dan sistem pelabelan untuk memastikan operasi berkecepatan tinggi yang stabil. Antarmuka operator pusat mengoordinasikan urutan mulai/berhenti, peningkatan kecepatan, dan diagnosis kesalahan. Pengaman, pelindung, dan sakelar berhenti darurat melindungi personel dan memastikan ketersediaan yang tinggi. Perubahan cepat dan parameter berbasis resep mendukung pengaturan yang dapat direproduksi untuk format 0,55 L, meminimalkan waktu perubahan, dan mengoptimalkan efektivitas keseluruhan lini.Kemampuan integrasi liniDirancang untuk operasi sebaris, teknologi pengisian PET ini terhubung melalui konveyor dengan zona penyangga dan transfer untuk memastikan aliran produk yang konsisten. Konfigurasi ini mendukung aplikasi untuk air mineral dengan penutup 30/25 PCO1881 dan memungkinkan penanganan yang efisien dari penyediaan praben hingga proses peniupan, pengisian, penutupan, dan pelabelan lengkap. Arsitektur sistem memungkinkan integrasi dengan peralatan hulu dan hilir seperti inspeksi, pengemasan, dan paletisasi untuk membentuk solusi lengkap untuk produksi minuman dan pengemasan industri.Kondisi dan riwayat perawatan mesinLini ini masih dalam produksi, yang menunjukkan kemampuan operasional dan kinerja berkelanjutan dalam kondisi nyata. Komponen dirawat agar tetap berfungsi untuk mendukung output yang berkelanjutan. Lini air PET bekas ini mendapat manfaat dari status aktif dan memfasilitasi bagi pengguna potensial untuk mengevaluasi kinerja dan merencanakan transisi yang lancar ke kebutuhan produksi baru.Kinerja operasional dan fleksibilitasDioptimalkan untuk air mineral, blok Sidel EUROPA WM menggabungkan pengisian yang presisi dengan torsi yang konsisten. Hsdpfjzc Hqmex Adcow

Kondisi: baik (bekas), Line for filling, capping, and labeling PET bottles, suitable for still liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 Piston Filler - Adjustable output: up to 3,000 bottles (packages)/hour - Number of filler heads: 8 pcs - Number of capping heads: 4 pcs Hedpfx Aewyddyjdcjw - Bottle capacity: 200 - 1,000 ml - Packaging dimensions: ~ diameter: 50 - 110 mm ~ height: 150 - 330 mm ~ min. bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ length: 1,500 mm ~ width: 1,150 mm ~ height: 2,300 mm The machine is currently equipped with a format for 1,000 ml bottles. An additional format for 500 ml bottles is included. The set also contains many spare parts and seals. 2) Hot-melt Roll-Fed Labeler for plastic labels - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Performance: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ length: 2,000 mm ~ width: 1,200 mm ~ height: 1,800 mm Equipped with an automatic glue application system by the renowned company NORDSON. The labeler is set up for labeling 1 L bottles. Adapting to other bottle formats requires a change to the infeed element. 3) 8.5 m long slat conveyors. Used machines, fully operational, serviced on an ongoing basis. A video of the machines in operation was made before dismantling. The photos show the current condition in our warehouse.