Mesin cetak injeksi

KraussMaffei KM500-4300CX

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Pressing force: 320 t (available in many other configurations as well!) Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear distance between frames: 2555 mm Machine length: 3785 mm Machine width: 2290 mm Width without support arms: 1740 mm Total height: 3100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Double-guided press beam, stable and precise - Sturdy back gauge, double-guided - Back gauge fingers, double-guided on linear rails - Adjustable front arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual tool clamping system, upper (Promecam system) - Foot switch with emergency stop - 380 V, 50–60 Hz, 3 phase - LED lighting Additional equipment: Dcodpouf Nr Ajfx Aiujh - Delem DA 66t CNC control - CNC-controlled R axis back gauge - CNC-controlled crowning - Fiessler Akas 2M laser safety system - 2 additional back gauge fingers (4 in total) - 1 set of upper and lower tools — Other bending lengths and capacities available with corresponding accessories! —

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping Unit Parameter Value Dcjdpfx Aewy U E Ujiueh Clamping force 8,000 kN Mounting plate dimensions (W × H) 1,620 × 1,500 mm Tie bar clearance (W × H) 1,120 × 1,000 mm Min./max. mould height 500 – 1,050 mm Max. daylight between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection Unit Parameter Value Screw diameter 130 mm Shot volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio 20 Electrical-Hydraulic Equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Dimensions and Weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (accessories)

Kondisi: baik (bekas), Tahun pembuatan: 2004, Atas permintaan, dengan biaya tambahan, pemuatan dan transportasi (seluruh Eropa) dapat diatur. Semua harga termasuk PPN. Peninjauan dapat dilakukan dengan perjanjian janji temu. Hubungi kami, tim kami dengan senang hati akan membantu Anda. Tukar tambah atau pertukaran dimungkinkan! Telepon: Ponsel: juga melalui WhatsApp Web: Pembelian / Penjualan mesin PEMBELIAN / PENJUALAN MESIN PRODUKSI & PENGOLAHAN LOGAM DAN LAINNYA. Apakah Anda membutuhkan mesin pengolah logam berkualitas namun terjangkau untuk produksi Anda? Atau ingin menjual mesin Anda? Dcsdpfxoxirqqe Aiush Untuk informasi lebih lanjut atau cara menghubungi, kunjungi situs web kami.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 6.200 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control unit. Screw diameter: 75 mm. Extras: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The machine is delivered RE-Conditioned by the technical expert team of UK Transitus. Optionally, we can offer on-site commissioning at the customer's facilities, ensuring reliable operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ SHOT WEIGHT: 1126 g MAX. PLATEN DISTANCE: 1400 mm MIN. MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm TIE BAR DISTANCE: 900 x 800 mm Dodjwq D Efepfx Aiuoch PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6,282

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine type: KM 650 – 8000 CM Year of manufacture: 1997 Operating hours: 80,000 h Control system: MC 3-F Screen language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 6,500 kN Maximum mold opening force: 346 kN Platen opening force (moving platen): 169 kN Platen closing force (moving platen): 144 kN Clamping plate size (H x V): 1,704 x 1,700 mm Clearance between tie-bars (H x V): 930 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 600 mm Daylight opening: 1,750 mm Ejector stroke: 250 mm Ejector force forward/back: 226 kN Injection unit: Screw diameter: 130 mm L/D ratio: 20 Injection pressure: 1,296 bar Shot volume: 6,172 ccm Shot weight (PS): 5,617 g Plasticizing rate: 1,540 ccm/s Screw speed: 138 rpm Plasticizing output: 238 g/s Nozzle contact force: 246 kN Electrohydraulic equipment: Nominal pump motor power: 132 kW Installed heating power: 70 kW Number of heating zones (barrel): 7 Dimensions and weights: Space requirement approx.: 12.00 x 2.80 x 2.70 m Dedpjub S R Hofx Aiujch Total weight: 43,000 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - 2 x hydraulic core pulls on fixed platen - 2 x hydraulic core pulls on moving platen - 8 x hot runner control zones - Robot interface according to Euromap 67

Kondisi: hampir baru (bekas), Tahun pembuatan: 2003, We are selling a complete Krauss-Maffei MC 4 control system, tested and fully functional! Dcodpfx Aoikfmheiujh

Kondisi: baik (bekas), Tahun pembuatan: 2011, Armoured roller CBM 240 / ST 120 MACH-ID 923 Dsdpfx Aiewvhrtjusch Type: CBM 240 / ST 120 Year of manufacture: 2011

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), A large-format injection moulding machine Krauss-Maffei, without robot, conveying equipment, safety enclosure, or attachments, is available. Clamping force: 1300t, injection volume: approx. 8,000cm³. Overall system dimensions (L/W/H): approx. 13,000mm / 3,550mm / 2,850mm. Machine weight: approx. 83,000kg. Operating hours: 73,259h, production hours: 57,753h. Documentation available. On-site inspection possible. Expected availability from Q1/2026. Dsdpfx Aijwut Hysujch

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 65.000 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, tinggi total: 2.355 mm, berat keseluruhan: 14.000 kg, panjang produk (maks.): 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has logged approximately 65,000 operating hours, and is in excellent condition. Please contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ Dcedpex Nr Uxefx Aiuoh • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Clamping platen opening stroke: 1,300 mm • Clamping platen dimensions (W x L): 1,270 x 1,260 mm • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Locating ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), Display - Demag Dcodjhi Ttnopfx Aiueh Year of manufacture: approx. 2003