Mesin cetak injeksi dengan robot

KraussMaffei KM575-2700C2

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 Ljdpfow U N Ixjx Aglsrg - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: baru, Tahun pembuatan: 2025, Injection Molding Machine – Krauss Maffei KM 651-6100 GX Year of manufacture: 2025 Hydraulic-mechanical, two-platen clamping system with four pressure pads on the fixed platen and four locking units on the moving platen. PV – injection unit regulation. MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5” operator panel with color touchscreen. Plasticizing unit Complete plasticizing unit for thermoplastics, screw diameter 95 mm, with check valve and open nozzle Nozzle radius: 25 mm Nozzle opening: 9 mm Technical specifications (standard version) Clamping unit Lodpfsxdd U Dox Aglorg Clamping force: 6500 kN Opening force: 455 kN Mounting platen dimensions (H x V): 1660 x 1530 mm Tie bar spacing (H x V): 1200 x 1020 mm Opening stroke: 1450 mm Mold height (min.–max.): 450 – 1000 mm Daylight: 1900 mm Ejector stroke: 300 mm Ejector force front/rear: 140 / 70 kN Injection unit Screw diameter: 95 mm L/D ratio: 23.0 Injection pressure: 1795 bar Injection volume: 3367 cm³ Shot weight (PS): 2391 g Injection speed: 110 mm/s Injection rate: 780 cm³/s Screw speed (standard): 147 rpm Plasticizing capacity (at standard screw speed): 102 g/s Nozzle contact force: 166 kN Electro-hydraulic system Pump motor power: 97 kW Installed heater capacity: 54 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap 6: 3.3 s / 840 mm Dry cycle time according to KM standard: 2.9 s / 600 mm Oil tank capacity: 1435 l Linear robot – Krauss-Maffei LRX 250 Payload < 25 kg (gripper + drives + parts) Placement on operator-opposite side Axes: X axis (from mold): 900 mm, servomotor Y axis (vertical, telescopic, with motor brake): 1000/1000 mm, servomotor Z axis (crosswise): 2500 mm, servomotor Dimensions and weight Net weight (including control cabinet): 38.5 t Machine dimensions (L x W x H): 10.19 x 3.03 x 2.51 m

Kondisi: bekas, Tahun pembuatan: 2024, Kraus Maffei mesin injeksi plastik tahun 2024 dalam kondisi sangat baik. Dalam kondisi sempurna, hanya dengan 588 jam operasi. Dilengkapi dengan: 1x katup pneumatik pada MOP, 1x unit penggerak hidrolik 20 liter, 2x penarik inti hidraulik, 1x manifold air 4-jalur. Tersedia segera dan dapat dilihat beroperasi berdasarkan perjanjian. Lodjx Ald Ropfx Aglerg Info lebih lanjut atas permintaan. Unit injeksi: 1400 Sekrup: 60 mm / 23.00 dengan pelindung aus / 25.50 Lebar bukaan maks.: 1150 mm Ejektor: Ejektor pelat EM hidrolik/elektrik Penarik inti: 2 hidrolik Katup udara: 1 MMP Sistem kontrol: MC P1 Catu daya: 400 / 230 V 50Hz 3-fase dengan netral Gaya penjepit: 2500 kN Kapasitas injeksi: 679 cm³

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN Max. mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clear width between tie bars (H x V): 1000 x 930 mm Mold opening stroke: 1150 mm Minimum mold installation height: 600 mm Max. daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/back: 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow rate: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated drive power, pump motor: 90 kW Installed heating capacity: 50 kW Heater zones, barrel: 7 Dimensions and weight: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration elements - Krauss Maffei Robot LR300 X: 1200 mm, servo motor driven Y: 1000/1000 mm, telescopic, servo motor driven Z: 3500 mm, servo motor driven C: 0 - 90°, pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve Lredjx Hzzcepfx Agleg - 6-fold pneumatic cascade control - 12 x hot runner zones - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, 1 Lrsdpfx Aox Uqa Degljg