Krauss Maffei KM650-4300 GX (2013)
KraussMaffei KM650-4300 GX

Name: KraussMaffei KM650-4300 GX
Brand: KraussMaffei
Availability: InStock

Tahun pembuatan

2013

Kondisi

Bekas

Lokasi

Trenčianske Stankovce Slovakia

Krauss Maffei KM650-4300 GX (2013) KraussMaffei KM650-4300 GX

Tampilkan peta

Data mesin

Nama mesin:: Krauss Maffei KM650-4300 GX (2013)

Pabrikan:: KraussMaffei

Model:: KM650-4300 GX

Tahun pembuatan:: 2013

Kondisi:: sangat baik (bekas)

Harga & Lokasi

Lokasi penjual:: 3011 Sedličná, 913 11 Trenčianske Stankovce, Slovakia

Hubungi

Rincian teknis

Perlengkapan:: dokumentasi / manual

Rincian penawaran

ID iklan:: A21704813

Nomor referensi:: 260102

Pembaruan:: terakhir pada 13.04.2026

Deskripsi

KraussMaffei KM650-4300 GX Machine

Clamping force (kN): 6500

Distance between tie bars (h x v) (mm): 1110 x 960

Mold opening stroke (mm): 1450

Min. mold height (mm): 450

Max. mold height (mm): 1000

Ejector stroke (mm): 250

Screw diameter (mm): 90 (HPS-M mixing)

L/D ratio: 20

Injection pressure (bar): 1839
Lsdpfx Aloy Apdqekork

Shot volume (cm³): 2290

Control version: MC5

Screen language: German

Condition: Tested, fully operational

Features:

- Anti-vibration leveling pads
- BluePower - Servo pump drive for reduced energy consumption
- Wear-resistant softener, surcharge
- BluePower - Complete insulation of the plasticizing cylinder for lower energy consumption
- 2 x pneumatic valve on moving platen for blow function
- 2 x pneumatic valve on fixed platen for blow function
- Pneumatic cascade control, 4-fold for hot runner
- Hydraulic cascade control, 4-fold for hot runner
- Conveyor belt control
- Mechanical robot interface according to EUROMAP 18
- Hydraulically actuated ejector plate including threaded holes and through holes in the moving platen for ejector pins
- Hydraulic core pull system, 2-fold on moving platen
- Hydraulic core pull system, 2-fold on fixed platen
- Pneumatic core pull system, single on moving platen
- Pneumatic core pull system, single on fixed platen
- Pressure relief for hydraulic core pulls
- Pressure relief for hydraulic cascade valves
- 20 hot runner control circuits
- Socket combination (3 sockets, single-phase, 2 CEE sockets 16 A, 1 CEE socket 32 A)
- Volt-free contact for "Plasticizing" signal at HAN 3 A socket
- Switch-over to holding pressure depending on mold cavity pressure (Kistler)
- Quality statistics
- Chip card reader
- Diagram display and analysis package with 10 diagrams
- Trend graphics
- PV regulation
- Production data interface consisting of 5 potential-free contacts in the control cabinet
- 3 freely programmable inputs and outputs in the control cabinet

KraussMaffei LRX 350 Linear Robot:

- Fully integrated control system
- Horizontal stroke: 4000 mm
- Vertical stroke (telescopic): 2000 mm
- Demolding stroke: 1200 mm
- Maximum payload: 35 kg

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terakhir online: minggu lalu

Terdaftar sejak: 2018

163 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+421 32/3... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin cetak injeksi lebih dari 5000 KN Haitian Haitian JUPITER 2 Plus 5500-2850, 2017

Pegnitz

10.971 km

Mesin cetak injeksi lebih dari 5000 KN
HaitianHaitian JUPITER 2 Plus 5500-2850, 2017

Hubungi

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 21.636 h, gaya penjepit: 550 kN, volume langkah: 1.239 cm³, tekanan injeksi: 1.990 batang, berat keseluruhan: 21.000 kg, diameter konveyor sekrup: 70 mm, Dasar Pengiriman: ex lokasi Waktu Pengiriman: sesuai kesepakatan Ljdpsx E A Tqjfx Alkork Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Lihat detail

Iklan kecil

Pendingin Used Chiller MTA - 22 kW | With warranty

Łęczna

10.162 km

Pendingin
Used ChillerMTA - 22 kW | With warranty

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 22 kW (29,91 hp), jenis arus masuk: tiga fasa, jenis pendinginan: udara, berat keseluruhan: 375 kg, tegangan masuk: 400 V, lebar total: 760 mm, panjang total: 1.870 mm, tinggi total: 1.450 mm, masa garansi: 6 bulan, de Ljdswwtqwjpfx Alksrk

Lihat detail

Iklan kecil

Tatabánya

10.498 km

Robot Industri
KUKAKUKA Robot KR 6 ARC

€990

~~€1.250~~

harga tetap ditambah PPN

Hubungi

Iklan kecil

Engel DUO 4550/500 pico Engel DUO 4550/500 pico

Rumania

11.248 km

Engel DUO 4550/500 pico
EngelDUO 4550/500 pico

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jam operasional: 65.000 h, gaya penjepit: 5.000 kN, diameter sekrup: 90 mm, tinggi total: 2.355 mm, berat keseluruhan: 14.000 kg, panjang produk (maks.): 7.800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, with a weight of 14,000 kg. It is currently in production, has logged approximately 65,000 operating hours, and is in excellent condition. Please contact us for further information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mould height: 350 mm • Maximum mould height: 900 mm • Clamping platen opening stroke: 1,300 mm • Clamping platen dimensions (W x L): 1,270 x 1,260 mm Ljdpfxjx Nr Uxo Alkork • Tie bar spacing (H x V): 910 x 830 mm • Motor power: 83 kW • Heating power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Locating ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Lihat detail

Iklan kecil

Robot industri 6-sumbu Stäubli RX160 Stäubli RX160 / RX160L

Němčice

10.665 km

Robot industri 6-sumbu Stäubli RX160
StäubliRX160 / RX160L

Hubungi

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 4.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: F17/5EWVB1, berat keseluruhan: 350 kg, kapasitas angkut: 30 kg, jangkauan lengan: 1.700 mm, I am offering the option to equip the Stäubli RX160 robot with a uniVal Drive. The robot is in near-new condition, with only 4,500 driven operating hours. See photo. Lsdpfx Alor Dvd Iekork Maximum payload: 30 kg Rated payload: 20 kg Reach (between axis 1 and 6): 1,710 mm Number of axes: 6 Repeatability – ISO 9283: ±0.05 mm Controller: Stäubli CS8C series Weight: 248 kg

Lihat detail

Iklan kecil

Kirchenlamitz

10.937 km

Daya hidrolik pack
Rexroth,

Hubungi

Iklan kecil

Emskirchen

11.029 km

Mesin cetak bantalan
ColorPrintCP

Hubungi

Kondisi: bekas, Pad Printing Machine - ColorPrint CP Year of manufacture: 2000 - Serial No. 900200532 Model: CP 801-S Ljdev Scmfepfx Alksrk - Printing force: 450 N - Cliché size, single-color use: 80 x 80 mm up to max. 80 x 200 mm - Printable area: Each approx. 30 mm less than the respective cliché size - Maximum cycle rate: 2000 cycles/hour - Air consumption: 3–5 m³/hour - Electrical connection: 240V / 50Hz - Pad stroke: stepless, electrically adjustable, 0–80 mm - Pad overhang: 100 mm Online video inspection possible via WhatsApp, MS Zoom, or Telegram. Machine in stock at Emskirchen/Nuremberg – Available immediately – Test run possible.

Lihat detail

Iklan kecil

Mesin cetak injeksi KraussMaffei KM 650 - 6100 CM

Eschweiler

11.315 km

Mesin cetak injeksi
KraussMaffeiKM 650 - 6100 CM

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 70.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 6.500 kN, diameter sekrup: 95 mm, volume langkah: 3.367 cm³, Clamping force: 6500 kN Max. mold opening force: 346 kN Movable platen opening force: 169 kN Movable platen closing force: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clear width between tie bars (H x V): 1000 x 930 mm Mold opening stroke: 1150 mm Minimum mold installation height: 600 mm Max. daylight: 1750 mm Ejector stroke: 250 mm Ejector force forward/back: 95 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow rate: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated drive power, pump motor: 90 kW Installed heating capacity: 50 kW Heater zones, barrel: 7 Dimensions and weight: Lrsdsx Hzzcjpfx Alkjk Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration elements - Krauss Maffei Robot LR300 X: 1200 mm, servo motor driven Y: 1000/1000 mm, telescopic, servo motor driven Z: 3500 mm, servo motor driven C: 0 - 90°, pneumatic - Conveyor belt - Safety enclosure Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner zones - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Lihat detail

Iklan kecil