Pompa sentrifugal baja tahan karat Pompa baja tahan karat

KSB ETANORM-C 150-250 C7

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 3.000 kg, Berat Rotor Maksimum --- 3000 kg (6613,87 lb) Berat Rotor Minimum --- 30 kg (66,14 lb) Dedpfx Aer Dd Avofrskl Diameter Rotor Maksimum --- 1400 mm (55,12 in) Diameter Poros Minimum --- 20 mm (0,79 in) Diameter Poros Maksimum --- 300 mm (11,81 in) Daya Motor --- 11 kW (14,75 HP) Unit Penggerak (Standar) --- 11 kW (14,75 HP) Kecepatan Penyeimbangan --- 0-3000 Rpm (25 Hz) (dapat disesuaikan naik turun) Unit Penggerak --- Sabuk saja atau Poros / Sabuk + Poros Panjang Ranjang --- 3000 mm (118,11 in)

Kondisi: bekas, jarak tempuh: 173.900 km, pendaftaran pertama: 11/2000, berat keseluruhan: 12.500 kg, jenis bahan bakar: diesel, warna: oranye, konfigurasi gandar: 2 gandar, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, Tahun pembuatan: 2000, Perlengkapan: ABS, kompresor, kopling trailer, pendingin udara, penggerak semua roda,

Tahun pembuatan: 1991, Kondisi: hampir baru (bekas), berat keseluruhan: 1.420 kg, kecepatan rotasi (maks.): 1.485 rpm, 3 pcs stainless steel volute casing pumps in process design 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! The pumps were operated on a test bench and all have very low operating hours! See pictures! Flow rate: 1001 m³/h (278 liters/second) Delivery head / pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: single-acting mechanical seal with flush water Manufacturer: Burgmann Impeller type: closed radial impeller Impeller diameter: 324 mm Bearing type: rolling bearing Lubrication: oil Lubricant monitoring: oil level controller Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Cover plate: 1.4408 (AISI 316) Shaft: tempered steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: gray cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Baseplate: painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Dkedeqabiajpfx Afrol Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Degree of motor protection: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Wir bieten hier einen hochwertigen 3D-Scanner von GOM an: GOM ATOS IIe Rev.01. Das Gerät ist komplett anschlussfertig und wird mit sämtlichen Kabeln geliefert. Auf dem PC ist leider ein Passwort gesetzt, jedoch liegt die Software auf CD bei. Zum Lieferumfang gehören verschiedene Sensorköpfe mit den folgenden Messvolumina: - Satz 175x140 - Satz 350x280 - Satz 550x - Satz 1000x800 Im Lieferumfang enthalten ist außerdem ein kompletter PC von GOM im Aluminiumkoffer mit vorinstallierter Linux-Software – ebenfalls anschlussfertig für den GOM ATOS IIe. Die Software ist auf CD enthalten. Ebenfalls dabei: Steel Scalebars und ATOS Auswertdongle. Dedpfew E I Itox Afrekl Zubehör: - Ersatzlampe - Kalibrierpanel (Aluminium), Typ CP20/MV, 350x280 mm²

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 680 kW (924,54 hp), Perlengkapan: unit pendingin, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant content: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow rate: 162,500 / 131,000 m³/h Motor power consumption: 17.60 / 11.50 kW Dkodpjvllxdofx Afrel Heat exchanger surface area: Operating noise: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically tested and is fully functional.

Tahun pembuatan: 1990, Kondisi: bekas, Material: standard steel Dodpfegb D Irsx Afrekl Drive motor: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Unladen weight: approx. 1,500 kg Delivery rate: 14.4 m³/h Max. operating pressure: 100 bar Technical documentation: No Note: Piston diameter: 57 mm, Stroke rate: 326 rpm, Stroke length: 105 mm

Kondisi: bekas, jarak tempuh: 71.000 km, daya: 445 kW (605,03 hp), pendaftaran pertama: 07/2012, jenis bahan bakar: diesel, berat keseluruhan: 50.000 kg, tipe perpindahan gigi: semi-otomatis, kelas emisi: Euro 5, Perlengkapan: filter jelaga,

Kondisi: bekas, daya: 210 kW (285,52 hp), pendaftaran pertama: 11/2007, jenis bahan bakar: diesel, konfigurasi gandar: 4x4, bahan bakar: diesel, warna: putih, tipe perpindahan gigi: semi-otomatis, jumlah gigi: 8, kelas emisi: Euro 4, Tahun pembuatan: 2007, Perlengkapan: ABS, filter jelaga, kemudi berkuasa, komputer bawaan, kopling trailer, pendingin udara, pengaturan jendela elektrik,

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after prior configuration. In addition, the software can read variable data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral arms for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064nm • Marking field size: 150x150mm (optional larger) • EZCAD marking software in German/English • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measurement system • Optional: Autofocus system – automatic determination of focus distance Djdpfx Aeu Smd Esfrjkl • Optional: Extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower to indicate machine status • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard shelf • Frame made of aluminum profile • Air cooled • Door width approx. 700mm / Door pass-through height: 400mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: bekas, jarak tempuh: 227.566 km, daya: 130 kW (176,75 hp), pendaftaran pertama: 05/2012, jenis bahan bakar: diesel, berat kosong: 6.390 kg, berat muatan maksimum: 6.110 kg, berat keseluruhan: 12.500 kg, konfigurasi gandar: 4x4, jarak roda: 3.050 mm, bahan bakar: diesel, kabin pengemudi: lain, tipe perpindahan gigi: lain, kelas emisi: Euro 5, suspensi: lain, jumlah tempat duduk: 2, panjang total: 5.100 mm, panjang ruang muatan: 2.650 mm, lebar ruang muat: 2.000 mm, tinggi ruang muatan: 4.000 mm, Tahun pembuatan: 2012, jam operasional: 16.641 h, tinggi konstruksi: 3.360 mm, Perlengkapan: hidrolik, komputer bawaan, kopling trailer, pendingin udara, penggerak semua roda,