Garis Pengelasan Spot Robot

KUKA/ SPATZ/ OMRON/ SICK

Kondisi: sangat baik (bekas), kedalaman tenggorokan: 1.100 mm, daya nominal pada siklus kerja 50%: 96 kVA, arus hubung singkat: 31.500 A, tegangan masuk: 400 V, jenis pendinginan: air, berat keseluruhan: 830 kg, Perlengkapan: Pelat tipe tersedia, Spot Welding Machine Type PMS 11-4 G3, Three-Phase DC Version - Specially designed for welding aluminium sheets - Lightly used, fully inspected and cleaned - All functions operational, ready for demonstration - Rated voltage 400V/50Hz - Rated power 96kVA - Welding current 23kA - Connection cable cross section 10mm²/phase - Fuse protection 63A - Throat depth 1050mm (!!) - Electrode arm diameter 60mm - Electrode holder diameter 30mm - Electrode force 600daN - Stroke 65+25mm - Electrode taper MK2 - Control unit MPS 8043/1 by Harms & Wende, with current rise and impulse function – includes operating manual - 2-stage foot switch according to accident prevention regulations (UVV) - Main machine switch - Pneumatic maintenance unit - Weight approx. 830kg - Complete documentation with wiring diagram, pneumatic layout, and coolant circuit - VAT can be shown separately - Delivery ex stock Dresden approx. 4 days within Germany – export may take longer! Commissioning on-site for a fee, invoiced according to actual time required The machine is located in Dresden, near the A17, and can be inspected and demonstrated by appointment. Gkjdpfxoh N Sc Es Amzed

Kondisi: sangat baik (bekas), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Equipped with control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg Gksdpshmvawefx Amzed

Kondisi: baru, Tahun pembuatan: 2023, nomor mesin/kendaraan: 7YXXX, VIS G ist die ideale und effizienteste Lösung für die Schrottverarbeitung wie Stanzteile, Abschnitte und Drähte und wird vor allem für die Automobilindustrie, Metallrecycler sowie die Nichteisenmetall-Recycling- und Umschmelzindustrie empfohlen. Gedpfx Aomqi Akemzskd

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Gjdpfxsr A Hcbs Amzskd Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Welding positioner KT 50 Load capacity horizontal: 50 kg, tilted: 25 kg Power supply: 220V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilt range: stepless adjustment via geared crank motor, 0 – 90° Gedpfed A Etyjx Amzokd Speed: 1.7 – 15 rpm Incl. foot remote control

Kondisi: baru, Pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Stroke rate: 130 strokes/min Ram area: 185 x 180 mm Gedpfjb U Hwtsx Amzjkd Ram bore: 40 H7 mm Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space required approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication system by Vogel - Cam controller by Balluff - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Kondisi: bekas, Tahun pembuatan: 1997, Pressing force 130 t Bending length 3,060 mm Frame width 2,690 mm Throat depth 410 mm Stroke 365 mm Installation height 535 mm Approach speed 200 mm/sec Working speed 1.0 - 10.0 mm/sec Return speed 135 mm/sec Table width 120 mm Table height 1,050 mm Tilt adjustable up to +/- 10.0 mm Operating hours approx. 31,800 h Gkodpfjxacfmsx Amzsd Compressed air 5.0 - 7.0 bar Oil capacity 250 l Operating pressure 340 bar Voltage 400 V Total power requirement 23.0 KVA Machine weight approx. 12,950 kg Dimensions L-W-H 3,660 x 2,310 x 2,900 mm Machine in well-maintained condition (!!) with only approx. 31,800 operating hours - in inspected condition - machine video - ?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 * swiveling control panel, front left * 2D graphic programming & product display * Tool & program library * USB keyboard and mouse interface - CNC controlled axes: Y1 + Y2 / X1 + X2 / R1 + R2 / Z1 + Z2 / I axis - CNC controlled backgauge (X1 + X2 axis) - CNC controlled height adjustment of backgauge (R1 + R2 axis) - CNC controlled adjustment of backgauge fingers (Z1 + Z2 axis) - CNC controlled pneumatic die shifting (I axis) - CNC WILA electro-motorized table crowning - TRUMPF hydraulic upper tool clamping - TRUMPF manual lower tool clamping - 1x mobile two-hand / foot operation - Rear safety device (sliding door) - Lateral safety device (swiveling door) - Original operating manual + spare parts list

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 3 kW (4,08 hp), Tahun pembuatan: 2025, Perlengkapan: pendingin udara, unit pendingin, G16 Gsdjwz Ufwepfx Amzokd Typ: Zwei Spannfutter

Kondisi: baru, Load capacity: 5.0 t Workpiece diameter: 100 - 2500 mm Total connected load: 2 x 0.37 kW Drive unit payload max.: 2500 kg Idler unit payload max.: 2500 kg Table rotation speed: 100 - 1000 mm/min Wheel diameter: 250 x 140 mm Machine weight approx. 0.9 t Includes double foot pedal (Start-Stop/Left-Right) Gedpfx Amogvwgcezekd Includes remote control (wired)

Kondisi: bekas, Tahun pembuatan: 2002, Technical Details: X-axis travel: 1,060 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Control system: Ultimax 4 Spindle speed: 10 – 10,000 rpm Tool holder: SK40 Tool magazine: drum magazine with 24 stations Feed rate XYZ: 3 – 7,000 mm/min Rapid traverse (XY): 30 m/min Gksdpfx Amou Iddnezsd Rapid traverse (Z): 20 m/min Table size: 1,220 x 510 mm Table load capacity: 1.1 t Compressed air connection: for 6 bar Total power requirement: 30 kVA Machine weight approx.: 6.28 t (without attachments) Machine dimensions approx. (LxWxH): 2.82 x 3.2 x 2.7 m Chip conveyor dimensions (LxWxH): 3.0 x 0.65 x 1.5 m Enclosed working area with chip and splash guard enclosure Including coolant system with internal coolant supply 30 bar (dimensions 1,200x500x150 mm), capacity for 340 liters Spindle with internal coolant supply Scraper-type chip conveyor Control panel with two monitors Electronic handwheel Attention! The tool change gripper arm is missing from the machine! The control system is accordingly set to disabled/off. i.D.