Mesin penggilingan

Kunzmann WF 4/3

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 300 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, gores kuas bulu: 60 mm, tinggi total: 2.100 mm, lebar total: 2.100 mm, panjang total: 2.300 mm, lebar meja: 450 mm, panjang meja: 750 mm, kecepatan rotasi (maks.): 4.500 rpm, kecepatan rotasi (min.): 1 rpm, berat keseluruhan: 1.900 kg, berat benda kerja (maks.): 500 kg, Travels X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, Heidenhain TNC 320 control system, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Cedpfx Ajwb Erzsdpjhc

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1996, Fungsionalitas: tidak berfungsi, nomor mesin/kendaraan: 340547, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 320 mm, jarak gerak sumbu Z: 400 mm, gores kuas bulu: 60 mm, berat keseluruhan: 1.300 kg, panjang meja: 650 mm, berat benda kerja (maks.): 250 kg, lebar meja: 350 mm, daya: 10 kW (13,60 hp), model controller: TNC 124, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The milling machine being offered is sold as defective. Displayed error: Major positioning error on the Z-axis. Otherwise, the machine is in good condition and has been used exclusively for training purposes. The following parts have been newly installed by the service team: - Power supply module - Z-axis assembly with brake - Z-axis measuring system - Scrapers on all axes - Filter mats - Timing belts - X-axis measuring system - Signal converter for measuring system Total maintenance and repair costs amounted to €15,000. The error is still present. Due to the machine's age and the modernization of the workshop, repairs have been discontinued. You are welcome to inspect the machine by appointment. Chjdpfx Aewlqtfedpec All information is provided without any guarantee or warranty.

Kondisi: bekas, Tahun pembuatan: 2005, Steuerung TNC 310 Dimensions (L x W x H): 2000 x 2000 x 2000 mm Machine weight: approx. 2.0 t Kunzmann Universal Milling and Drilling Machine WF 4/3 Milling Machine – equipped with Heidenhain TNC 310 control The milling and drilling machine allows for a wide range of machining options, such as milling and drilling. Preferred materials are those commonly used in mechanical engineering, such as steel, cast iron (GG), and aluminum. Materials such as paper, graphite, minerals, or magnesium may not be machined, or only with corresponding protective equipment. --> Technical Data – Milling Table: --> Clamping surface: 650 x 350 mm --> T-slots: 5 --> Slot width: 14 mm --> Slot spacing: 63 mm --> Max. load: 250 kg --> Working Area --> X-axis: 400 mm --> Y-axis: 350 mm --> Z-axis: 400 mm --> Maximum Distances --> Table top to horizontal spindle center: 540 mm --> Table top to vertical head lower edge max.: 430 mm --> Milling Spindle --> Tool holder: SK 40 --> Horizontal speed range: 5 - 4500 rpm --> Vertical speed range: 5 - 4500 rpm --> Vertical quill stroke: 60 mm --> Vertical head swivels both sides: 90° --> Feed (potentiometer at 100%) longitudinal and cross: 0 - 2000 mm/min --> Rapid traverse longitudinal and cross: 5000 mm/min --> Vertical feed: 0 - 2000 mm/min --> Vertical rapid traverse: 4000 mm/min Cedpfewwl Insx Adpohc --> Drive Power --> Power at 100% duty cycle: 8.0 kW --> Power at 44% duty cycle (operation time 5 min): 9.3 kW

Kondisi: bekas, Tahun pembuatan: 1996, Universal tool milling machine x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,000 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 124 Motor power: 5.5 kW Weight: 1,800 kg Cjdew U U Siopfx Adpshc Space requirement: approx. 2,000 x 1,000 x 2,100 mm Original price: approx. €55,000 (!!) Equipment: - Universal tool milling machine - HEIDENHAIN path control TNC 124 - Swivelling control panel, situated right of the machine - Hydraulic tool changer (DIN 69872) - Vertical milling head – SK 40 - X-axis feed: 0 – 2,000 mm/min - Y-axis feed: 0 – 2,000 mm/min - Z-axis feed: 0 – 2,000 mm/min - Central lubrication, electric - Coolant system - Chip tray - Operating instructions for machine + control Special accessories included: - Hydraulic machine vice - Multiple tool holders - HEIDENHAIN HR 410 electronic handwheel

Kondisi: bekas, Tahun pembuatan: 2000, Used universal milling and drilling machine Kunzmann WF 4/3 with Heidenhain path control TNC 124 Travel X/Y/Z = 400/350/400 mm Speed 1–4000 rpm Vertical head with 60 mm quill Fixed angle table 650x350 mm Spindle SK40 with hydraulic tool clamping Accessories: - Heidenhain HR 410 electronic handwheel - Chip guard enclosure - Machine lamp Csdpfxow U D Sxe Adpshc - Coolant system - Machine feet The machine is located at our premises in 71334 Waiblingen-Beinstein. It is immediately available and can be inspected by appointment. Please arrange a viewing in advance.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Kunzmann WF4/3 Universal Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2002, Excellent Condition CE compliant!! Technical Data: - Year of manufacture: 2002 - Fixed angle table - Speed: infinitely variable up to 4000 rpm - Feed rate stepless in 3 axes: 0 to 2000 mm/min - Travel X/Y/Z: 400/350/400 mm - Rapid traverse X/Y/Z: 5 / 5 / 4 m/min - Table size: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill stroke: 60 mm - Vertical and horizontal quill - SK40 taper - Hydraulic drawbar system - Weight: approx. 1700 kg - Space requirement: approx. 2.3 x 2 x 2 m - Drive power: 12 KVA Equipment and Accessories: - Heidenhain TNC 124 control Chedpfx Adjw U Exyjpoc - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, user manual for control and programming examples - Handwheels - Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine with Heidenhain TNC 124 control. This universal milling machine is in very good original condition. The unit comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. Additionally, the machine has hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very simple thanks to the tilting vertical head. The guideways are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically checked by us. Take the opportunity to inspect and test the Kunzmann on site under power. Additional milling machines from renowned manufacturers are available on our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF4/3 Universal Milling Machine with Heidenhain TNC 124 Control, Year 2010, Excellent Condition, Complete with Tooling, CE Compliant! Technical Specifications: - Year of manufacture: 2010 - Fixed angle table - Infinitely variable speed up to 4000 rpm Chodpfxow Id Dzs Adpoc - Stepless feed in 3 axes from 0 to 2000 mm/min - Travel X/Y/Z: 400/350/400 mm - Rapid traverse x/y/z: 5/5/4 m/min - Table surface: 650 x 350 mm - Table load capacity: 250 kg - Vertical quill travel: 60 mm - Vertical and horizontal quill - SK40 - Hydraulic clamping system - Weight approx. 1700 kg - Space requirements approx. 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories & Features: - Heidenhain TNC 124 control system - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts diagrams, control operation manual, programming examples - Hand wheels - Coolant system - Tool holders, hydraulic vise, clamping tools About the machine: Offered here is a Kunzmann WF4/3 universal milling machine with Heidenhain TNC 124 control. The machine is in very good original condition. It comes from a facility where it was used sparingly for training purposes only. The control is especially easy to operate. In addition, the machine features hydraulic clamping both vertically and horizontally. The conversion from vertical to horizontal setup is very straightforward thanks to the swing-away vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the Kunzmann under power at our premises.

Kondisi: bekas, Univ. NC Tool Milling Machine KUNZMANN Model WF 3/4 Mach. No. 341020 Year of manufacture: 1998 Travel paths X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle taper SK 40 Spindle speed 40 – 2500 rpm Feeds X, Y, and Z axes 0 – 1000 mm/min, stepless Rapid traverse X, Y axis 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill adjustment vertical 60 mm Spindle motor power 3 KW Electrical connection 400 Volt, 50 Hz - CNC path control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and stepless electronic variator drive - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet mounted on the machine - Coolant tank with separate pump - Central lubrication Chjdpslvyrbofx Adpoc - Lighting Space required (L x W x H) 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Tahun pembuatan: 2001, Kondisi: siap digunakan (bekas), X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000 rpm, quill stroke: 60mm, max. feed rate: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is non-functional and repeatedly experiences faults: issues with movement monitoring on the Z and Y axes, significant positioning error on the Z-axis, malfunctions when moving the control cabinet. The readiness controller is missing and the error message appears continuously when switching on. After several attempts, referencing is possible. The spindle gearbox has excessive play. Inspection on site is possible. Chedpeuqacwofx Adpec

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 2.542 h, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1.0 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement (approx.): 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Csdpfx Adjw D D Sfepshc Centralized lubrication Coolant system CE-compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp