Mesin penyambung veneer

Kuper FWS 1250

For joining veneers with thicknesses of approx. 0.3 – 3.0 mm. The machine operates using a special glue thread, which is applied over the joint in a zig-zag pattern. High adhesive strength and tear resistance ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded inwards, eliminating the need to sand off the adhesive.

Specific Features:

Knodpfsxdxccex Aahjf
* Torsion-free C-frame construction made of steel
* Stainless steel worktable
* Standard heating system
* SP control unit
* Pneumatically regulated gluing pressure
* Disc wheel system with tolerance compensation for varying veneer thicknesses
* Adjustable heating performance for stand-by and operation modes
* Tool-free adjustment of the pressure roller
* Fully automatic start/stop function with photoelectric sensor

Technical Data:

Frame depth: 1,250 mm
Feed speed, 4-stage: approx. 15, 30, 45, 60 m/min
Veneer thickness: approx. 0.3 – 3.0 mm
Operating voltage: 400 V, 50 Hz, 3-phase
Compressed air connection: R 1/4''
Compressed air consumption: approx. 7 NL/min
Total connected load: approx. 3.1 kVA

Standard Accessories:

1 trial spool of original KUPER glue thread type 1220
10 threaders 103071
1 kg separating agent 105661
1 set of tools, 1 operating manual

Glue thread supply available on request!

Art. No. 0149650

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.