Planer empat sisi lebar

KUPFERMUHLE 80 na 6 głowic 80cm

Kondisi: bekas, Number of spindles: 6 units Working width: 240 mm Planing height: 200 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- Machine has been cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 4th spindle ----- Lredpevnv Uzefx Agijw First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air-cushion lubrication system in the work table 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 and 3 Working height increased to 200 mm instead of 120 mm 5 x electronic horizontal positioning (positions 2–3–4–5–6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning (positions 2–3–5–6) 3 x electronic tool diameter setup (positions 3–4–5) Mobile 10 control PRL equipment for cutting out the glazing bead on the 2nd upper horizontal spindle Machine is supplied without tooling (All technical data as per manufacturer – no guarantee!)

Kondisi: baik (bekas), Tahun pembuatan: 1996, EN-KRUSI-Chalet-Construction-Machine-Blockhouse-Production-Line- Type-CM-40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / operational Operating principle: Processing of structural timber for chalet construction / log house manufacturing Beams can be machined in a single pass • Cross-cutting • Horizontal and vertical milling of tenons / grooves in one clamping • Drilling • Milling of face grooves Workpiece: • Maximum cutting height: 200 mm • Maximum cutting width: 250 mm Robust welded steel construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground linear guides for highest machining precision. Carriage runs on dust-protected and preloaded ball bearing guide rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control system. Motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for external chip extraction, with 2 eccentric clamps, without milling tool (rebate cutter). With electro-controlled hydropneumatic horizontal and vertical feed, feed is synchronized with the start of the milling motors. Rapid traverse and feed rate continuously adjustable. Completely wired and installed, including air maintenance unit. Timber thicker than 14 cm must be machined in two passes. Such pieces must be repositioned to compensate for the excess thickness for second milling. Machine safety covers over moving parts with gas spring counterbalancing. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog gauge Max. saw blade diameter / bore: 400 / 30 mm Carbide-tipped with chip depth limiter (downcut) Adjustable riving knife Motor speed: min-1 / 2900 Power: 2.2 kW 2. CM milling unit (log house unit) Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter diameter: 180 mm Max. cutter width: 130 mm (For cutter width from 60 mm, only use cutters made of aluminum alloy with indexable inserts) 2 motors, hydropneumatic feed, each 2.2 kW Hydropneumatic feed Rapid traverse and feed rate infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog indication Collet chuck: ER 25 Clamping diameter max: 16 mm Drill diameter max: 32 mm Motor: min-1 1450, 1.8 kW 4. Face-milling unit Hydropneumatic feed Spindle adjustment with digital display Max. cutter diameter: 230 mm Max. cutter width: 60 mm Motor: min-1 / 2900, 3.0 kW 2 v-belts SPZ 9.5x1000 La Pneumatics: Customer-side operating pressure min/max: MPa (bar): 0.7/1 (7/10) Compressed air consumption: 8 Nm3/h Electrics: Operating voltage: V / Hz 380, 50 Rated power: 8.8-15.8 kW depending on configuration Customer-side fuse: 3 x 25 A (slow blow) Max. simultaneous power consumption: 4.4 kW Dimensions: Machine width: 2400 mm Machine depth: 1600 mm Total height, guard down: 1600 mm Total height, guard up: 2200 mm Extraction port diameter (bottom extraction): Approx. weight: 1300 kg Incl. 2 x 6 m (2 x 4 m) roller conveyors Technical specifications subject to change! Lredpeu Uh T Defx Agijw

Kondisi: baru, Working length 3000 mm Working width 360 mm Roller width 360 mm Roller diameter 60 mm Load capacity 900 kg Height adjustment 650 - 1100 mm Ljdpfx Agefv Atteierw Machine weight approx. 0.050 t Dimensions (L x W x H) 3.1 x 0.45 x 0.6 m 3m roller conveyor with manual length stop.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Working width: 260 mm Working height: 170 mm 5 spindles Spindle diameter: 40 mm Lodpevgnb Rofx Agijrw Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion table Driven roller at outfeed table Supplied with tooling.

Kondisi: bekas, Tahun pembuatan: 2010, Chalet construction machine Used, good condition, lightly used Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type-approved up to 140 mm round log corner joints Sawing: 1x Ledpsvwfqqofx Agierw Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, sold as seen, without guarantee or warranty

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, "CELASCHI" Mod. TSA 200 AUTOMATISCHE DOPPELTE ZAPFENFRÄSE Mit folgenden Ausstattungsmerkmalen: 1 + 1 pneumatische Vorritzaggregate 1,5 PS mit Riemenantrieb – 6.000 U/min 1 + 1 Ausräumaggregate 5,5 PS mit Riemenantrieb – 6.000 U/min 1 + 1 Profilieraggregate 5,5/7 PS – 3.000/6.000 U/min Maximale Arbeitsbreite: 3.000 mm Vorschubgeschwindigkeit stufenlos einstellbar von 3 bis 18 m/min Ljdpfxjvi N Rfj Agisrw GEBRAUCHT, IN GUTEM ZUSTAND

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tahun perombakan terakhir: 2022, Dijual satu lini produksi BSH lengkap. Instalasi terdiri dari komponen dari System TM (bagian pengumpan), Keilzinken Technik NKT, automasi HIT (gudang bertingkat, transportasi, stasiun perbaikan pengumpanan lamella, mesin serut dan Kallesoe, dll.). Mesin serut dari REX: serut awal, serut lamella dan serut finishing. Mesin press frekuensi tinggi dari Kallesoe. 2 silo. Ljdpfx Agjwgcchoierw

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Nagelneue Friulmac EQ 004 2.5 mit Zufuhrband und Aufgabe-Trichter Touchscreen-Bedienung und automatische Verstellung Bearbeitungslänge: min. 190 mm – max. 2.500 mm Bearbeitungsbreite: min. 30 mm – max. 250 mm Materialstärke: min. 12 mm – max. 35 mm Lredpfx Ajvupm Djgijw Vorschubgeschwindigkeit: 6 – 25 m/min 2 x 2 Hobelaggregat: 3 kW – 720 U/min Hauptprofilieraggregat: 4 kW – 7.200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Kondisi: baru, Tahun pembuatan: 2022, Working width: 630 mm Planing height: 300 mm Cutterhead: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: digital readout Ledpfx Ael D Rxfsgierw Feed speed: infinitely variable 5 - 22 m/min Infeed roller: steel Pressure bar: segmented Outfeed roller: rubber, 2 x Table rollers: none Motor power: 9.2 kW Extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Twin-shaft secondary trimming saw, manufacturer LINK type CSMK 285 A1 B1 with spray unit Saw head clamping length: 4 x 125 mm Weight: 17,500 kg Extraction device: Av 21 CSMA 540 Extraction: SE separating conveyor Ljdowww Iyjpfx Agiorw Drive power: 4 x 132 kW Feed speed: up to 150 m/min