Planer empat sisi

LEADERMAC LMC 423C

Tahun pembuatan: 2009, jam operasional: 214 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, DSG Sonic Thin-cut Frame Saw – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical Data: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of saw frame strokes: approx. 550/min Cutting heights for different saw lengths: Saw length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) Saw length 420 mm → cutting height: 30–128 mm, 45–128 mm Saw length 500 mm → cutting height: 80–210 mm, 45–210 mm Saw length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For basic machine: +185 mm With magazine: 250–1700 mm With double planer: +250 mm Block height variation: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Other technical data: Cutting width with central fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss during cutting (kerf thickness): from 0.9 mm Saw blade lifespan (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): For the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator’s workplace: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction system and air: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide monitoring Ljdpfx Aasw Dp Ufjhjak ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Supply terminal cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Kondisi: sangat baik (bekas), 6338 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 160 mm 7 spindles: 1) Lower horizontal: 230 mm, 5.5 kW 2) Right vertical: 160 mm, 5.5 kW 3) Left vertical: 160 mm, 5.5 kW 4) Upper horizontal: 230 mm, 7.5 kW 5) Upper horizontal: 230 mm, 7.5 kW 6) Lower horizontal: 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - All spindles equipped with brakes - Spindle speed: 6000 rpm From above: - 6 feed rollers, toothing, metal, including 2 double rollers - 4 discharge rollers, rubber, including 1 double roller - 3 pressure units on discharge From below: - Side feed pressure at the infeed - Infeed roller, toothed, driven, swivel-mounted in lower table - 3 driven feed rollers, metal, smooth - Pneumatically adjustable rollers - Infeed table length: 1190 mm - Central table lubrication Laodpjhp N R Ijfx Aahjk - Electric thickness adjustment - Body lifting motor: 0.56 kW - Stepless feed speed adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Feed by Cardan shaft rollers - Fully enclosed in safety cabin - Suction connection diameter: 7 x 125 mm - Dimensions (LxWxH): 5100 x 2070 x 1900 mm - Weight: approx. 5000 kg ADVANTAGES – With 7 heads – Universal spindle – Ideal for both wet and dry wood – Spindles equipped with brakes – Full technical documentation (DTR) – Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on EUR/PLN 4.2 exchange rate) (Prices may vary significantly with exchange rate fluctuations)

Kondisi: hampir baru (bekas), DE_Beschreibung Maximale Werkstückbreite, mm: 1150 Maximale Werkstückdicke, mm: 120 Vorschubgeschwindigkeit, m/min: 5-20 Gesamtmaße, mm: 5000x3000x2800 Leistung, kW: 139 Gewicht, kg: 11000 Maschine für die Unterseite-Bearbeitung (Unterflurschleifen): Bearbeitungseinheit 1: Kontaktwalze Durchmesser 250 mm Bearbeitungseinheit 2: Kontaktwalze Durchmesser 250 mm Bearbeitungseinheit 3: Schleifschuh Maschine für die Oberseite-Bearbeitung (Oberschleifen): Lodpjhm E Ixofx Aahsak Bearbeitungseinheit 1: Kontaktwalze Durchmesser 250 mm Bearbeitungseinheit 2: Kontaktwalze Durchmesser 250 mm Bearbeitungseinheit 3: Schleifschuh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2025, Horizontal thin-cut band saw 400 mm working width 22.0 kW saw motor New 2024 model with larger wheels Touchscreen and PLC by Schneider Larger wheels for higher cutting speed Laodevwbgzjpfx Aahok Frequency inverter on the wheels for adjustable cutting speed. Suitable for lamellas from 2 mm

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GSO -830, Mesin pembuat panel WINTERSTEIGER DSG ECO 150 MM, tahun 2013 Lodpfow T U Arsx Aahjak

Kondisi: bekas, Tahun pembuatan: 2022, Additionally, freight €4,000.00 and installation and commissioning €5,000.00 Sanding Machine B Sand 5 with Partial Rotator Mode of Operation: The panel is placed on the infeed table. It is conveyed into the partial rotator and centered. The panel is sanded in the sanding machine, once in forward and return direction. The panel is then rotated in the partial rotator. The second side of the panel is sanded in the sanding machine. Afterwards, there are two options: either the panel is moved onto the outfeed table and unloaded, or it returns to the infeed table and is unloaded there (the second option increases the processing time). Sanding Machine Equipment: - 1 upper sanding flap roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - Cross brush, suitable for sanding cross grain. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW. - 3 upper sanding discs to perfectly cut longitudinal and transverse wood fibers. Each with 1.5 kW; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Once the panel edges are detected, it follows the door edges. Power: 0.75 kW; Diameter: 250 mm. Machine Features: - The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate panel sanding. - All tools are controlled via frequency converters. - All brushes are equipped with quick-change sanding strips without the need to replace the hub. - The discs are fitted with air nozzles to optimize cleaning and cycle time. - Sanding discs feature a Velcro attachment system. - Feed rate and revolutions are controlled by PLC to prevent edge damage to parts. - High-quality sanding on 4 sides thanks to the machine’s consistent material removal. - Automatic and quick changeover of sanding units. - Constant pass-through height; PLC and industrial software allow integration into a finishing line. - Infinitely variable speed for discs, brushes, and feed, based on frequency converter full equipment. - Right/left rotation of discs and brushes with different abrasives. Ljdpfxsvvkipe Aaheak - Individually driven adjustment for discs, rollers, and belts. - Additional setting for brushes and discs to optimize abrasive usage and adjust sanding pressure on surfaces. - Robust frame made from steel tubing guarantees excellent rigidity, stability, and flatness. - Planed top bed ensures optimal parallelism of the working surface for the sanding discs. - All sanding unit carriages utilize linear recirculating ball guides for high load capacity and precision. - Motorized feed belt controlled by frequency converter, 0.55 kW. - Machine doors are equipped with safety interlocks. - Machine doors with viewing windows allow observation of workpieces during processing. - Under the sanding units, there are Ø 80 mm rubber-coated pressure rollers to secure workpieces during operation. - Low operating costs thanks to individual replacement of the flaps. - Low operating noise due to the closed machine housing. - All units have extraction housings with corresponding extraction connectors. Cover plate with extraction socket. - Fully enclosed machine housing for a clean working environment.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Steel structure Bearing-mounted rollers Available lengths: 2 or 3 meters Lasdpfjwl Duvox Aahsk Width: 50 cm Adjustable legs Net price per running meter: For orders above 10 m: €60 net/m For orders above 20 m: €50 net/m Tables available from our warehouse in Biertowice near Krakow.