Penggiling silinder

LEIFELD PLB 1200

Kondisi: baik (bekas), Tahun pembuatan: 1970, lebar di tengah: 2.350 mm, tinggi pusat: 2.400 mm, de-hu-it-lt-001 Giedextaxwjpfx Adtsl

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Gedpjxddvnofx Adtoil Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.

Kondisi: baik (bekas), Tahun pembuatan: 1980, lebar di tengah: 2.350 mm, tinggi pusat: 1.200 mm, tinggi produk (maks.): 6 mm, Manufacturer: LEIFELD Model: PLB 1200 Year of manufacture: 1980 Specifications Metric | Imperial ----- Gsdpfxoq Dqdij Adteil Max. workpiece diameter over bed: 1200 mm Max. workpiece diameter in pit: 2260 mm Center height over bed: 600 mm Distance between centers: 2350 mm Length of the gap: 400 mm Max. sheet thickness: 6 mm X-axis stroke: 1200 mm Y-axis stroke: 300 mm Spindle speed: 6 – 675 rpm Power: 40 kW Tailstock quill travel: 750 mm Dimensions (approx.) Length: 4500 mm Width: 3200 mm Height: 2500 mm Weight: 10,200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. As such, this information does not constitute representation or contractual terms. We recommend verifying all critical details independently.

Kondisi: baik (bekas), Mesin Press Tekuk Merek: AMADA Gisdpowivddsfx Adtjl Tipe: HFT 80/25 Kapasitas: 2500 x 80T 4 sumbu Jarak antara kolom: 1800 mm Dimensi: 3500 x 1500 x 2100 mm Berat: 6.500 kg Dilengkapi dengan tooling baru dan bekas

Kondisi: bekas, Tahun pembuatan: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Maximum drying water evaporation capacity: 9.3 kg/h at a maximum air temperature of 350 °C. The drying chamber has a diameter of approx. 1000 mm x 700 mm straight side height x 1100 mm conical bottom height. Includes (1) CMT model AF07 rotary atomizer driven by an IBAG motor, 0.7 kW power, impeller diameter 63 mm, speed range 10,000 – 60,000 rpm. Also equipped with an electric air heater (12 kW), cyclone separator with container for dry product, fan, and a main control cabinet with integrated control panel. Godpfeuk Ehxjx Adtsil

Kondisi: baik (bekas), Tahun pembuatan: 1994, Toupieuse CNC pour spirales, capacité 50 cm³, diamètre minimum et maximum de la spire : 500 à 3 500 mm. Gijdpfxsiu Acpo Adtel

Kondisi: hampir baru (bekas), Set, packed in a wooden crate, screw and barrel for 150 mm extruder, grooved feed section, screw with shear and mixing section Gisdpfx Adsdm Aghstsl

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 124, translation-001 Gedpfx Adewl An Istjil

Kondisi: bekas, Technical Details: X-travel: 6,500 / 13,150 mm Y-travel: 4,000 mm Z-travel: 1,250 mm W-axis: 2,250 mm Table size: 5,500 / 12,150 x 3,000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Milling spindle motor: 63 kW Spindle torque: 3,300 Nm Tool holder: DIN 39871 AD ISO 50 Milling spindle speed range: 6.3 – 4,000 rpm Feed rate: 1 – 24,000 mm/min W-axis feed: 1 – 6,000 mm/min Clearance between columns: 3,500 mm Clearance height: 3,000 mm Gijdowc A Shopfx Adtsl Total connected load: 120 kW Machine weight approx.: 245 t Space requirement approx.: 29.0 x 7.7 x 8.1 m The machine is in nearly new condition and was completely modernized in 2020! Equipped with CNC SIEMENS 840 D Automatic tool magazine for 153 tools Automatic milling head magazine for 6 milling heads Machining module – straight – extended straight – Machining module – angular standard – 4,000 rpm, 144 x 2.5°, ISO 50 Machining module – narrow extended angular – 40 kW, 4,000 rpm, 1,800 Nm, 144 x 2.5°, ISO 50 Machining module – universal index – 40 kW, 4,000 rpm, 2,100 Nm, C-axis 144 x 2.5°, B-axis +/- 44 x 2.5°, ISO 50 Coolant system, chip conveyor

Tahun pembuatan: 2021, Kondisi: baru, Directly available from stock List on request Gsdpfjica Amjx Adtoil 550 pieces = 1 truck load (15,000 kg theoretical weight / 13,900 kg actual weight)