Mesin deburring

LISSMAC SBM-S 1000

Tahun pembuatan: 2025, Kondisi: baru, Working width: 1000 mm Workpiece thickness (max): 0.5–50 mm Abrasive belt width: -- mm Machine weight approx.: 2.5 t The SBM-L 1000 G1S2, which operates using a dry process, allows for alternating processing of steel, stainless steel, and aluminum. It deburrs and rounds the edges on external and internal contours of stamped, laser-, fine plasma-, or waterjet-cut workpieces with a thickness of up to 50 mm on both sides in a single pass. * Two grinding units, one each on the top and bottom sides, remove splatter and light burrs from the outer and inner edges of sheet metal. * Four abrasive belts in total, two on the top and two on the bottom, process sheet metal simultaneously on both sides. All edges are either smoothed or rounded, depending on the tool settings. * Double-sided processing eliminates time-consuming flipping and double handling of workpieces. * Each pair of units can be switched on/off or adjusted independently according to application requirements. * Includes Siemens S7 control system: - Simple and convenient operation via an intuitive user interface - High operational safety with 3 password-protected user levels - Integrated program memory - USB/RJ45 interface for data exchange or connection of external devices (e.g., barcode scanner) - Direct material thickness input via touch panel - All axes automatically adjust to preset material thickness - Standby position for deactivated units - Service-friendly (e.g., plain-text fault messages) Comprises: - SBM-L 1000 G1S2 grinding machine (kit) - 4x SBM 1000 grinding belts with rib P60 SiC Hedpfx Aajuia Dqsnofg - SBM-L 1000 grinding belt L=3125 W=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry extraction - Standard pipework DDE 3002 / WDE 3002 for SMD 123, SMD 133 Additional detailed technical data available upon request. The machine is available immediately from stock Niederlangen.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Grinding area: 2000 x 900 mm, cross travel: 875 mm, longitudinal travel: 2450 mm, distance from table to spindle centre: 845 mm, magnetic chuck dimensions: 2000 x 800 mm, max. table load: 2.3 t, longitudinal feed: 1,000–30,000 mm/min, cross feed: 0.01–2,000 mm/min, vertical feed: 0.001–1,500 mm/min, grinding wheel dimensions: 500 x 100 x 203.2 mm, grinding spindle motor power: 22 kW, length: 6,800 mm, width: 3,450 mm, weight: 13 t. Inspection on site is possible. Hfsdsuyk N Iopfx Aanjg

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Hsdpfxot Hw Iis Aanofg Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Amada HFE M2 220t 4m, 8-Achsen Abkantpresse Baujahr: 2012 Presskraft: 220 Tonnen Max. Biegelänge: 4.280 mm Hub: 200 mm Anfahrgeschwindigkeit: 1 - 100 mm/s Biegeschwindigkeit: 1 - 10 mm/s Rücklaufgeschwindigkeit: 1 - 100 mm/s Ölvolumen: 195 l Motorleistung: Gewicht: 17.450 kg Abmessungen: Maschinenlänge: 5.070 mm Maschinentiefe: 2.075 mm Maschinenhöhe: 3.085 mm Ständerabstand: 3.760 mm Oberwangenbreite: 180 mm Tischhöhe: 960 mm Hfedpfx Aaev S U Izjnjg Gesamthöhe offen: 470 mm Ausladung: 420 mm

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Amada HFE 220-L Year of manufacture: 2004 Hodpfx Aasuiwypensfg Laser height adjustment Working width: 3100 mm Pressing force: 220 tons Equipped with numerous tools.

Kondisi: bekas, Tahun pembuatan: 2018, Opportunity to purchase an excellent Bystronic ByStar fiber laser with a working area of 4000 x 2000 mm and 6000 W laser output (Dynamix Edition F6000). Included: - V1 cutting head (first version) - NCT zle Changer 64 positions - Detection eye - Dust extraction system 1 Base Machine 1.1 ByStar Fibre 4020 Dynamic Edition F6000 1.2 Scope of delivery 1.3 Safety and guidelines 1.4 Complete documentation 1.5 Fiber power shut-off 1.6 ByPos Fiber 1.7 Cutting control fiber 1.8 Scanning 1.9 Shuttle table 1.10 Laser source 1.11 Chiller unit 1.12 Tank heater 1.13 Machine control and user interface 1.14 Uninterruptible power supply (UPS) 1.15 Conditional messaging system 1.16 Maintenance messenger 1.17 Cutting plan editor 1.18 Restart manager 1.19 System administrator 1.20 Cutting parameter assistant 1.21 OPC interface for cutting 1.22 Handheld control unit 1.23 Electrical connection 1.24 Compressed air (machine, laser source, chiller, dust extraction system) 1.25 Material specification 1.26 Cutting gas 1.27 Environmental conditions 1.28 Structural requirements Hjdpfxex Tcvne Aanofg Immediately available and can be inspected in operation by appointment. Working dimensions: 4000 x 2000 mm Operating dimensions: 4000 x 2000 mm Laser output: 6000W Power-on hours: 49,086h Operating time: 49,086h Cutting hours: 18,659h

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Hjded Ixadspfx Aanjfg Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, kecepatan spindel (maks.): 2.800 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 105 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 22.000 W, tinggi total: 2.163 mm, lebar total: 2.005 mm, berat keseluruhan: 7.500 kg, panjang produk (maks.): 4.438 mm, jumlah sumbu: 4, This 4-axis DOOSAN Puma 2600 LYB II was manufactured in 2021. It features a maximum turning diameter of 376 mm and a turning length of 1,350 mm. The machine is equipped with a 12-station turret, a tailstock with tailstock drive, and a steady rest with a diameter range from 40 mm to 200 mm. If you are looking for a high-quality lathe, consider the horizontal lathe DOOSAN Puma 2600 LYB II, which we offer for sale. Contact us for further details. • Capacity • Swing over bed: 780 mm • Swing over cross slide: 630 mm • Recommended turning diameter: 315 mm • Maximum turning diameter: 376 mm • Maximum turning length: 1,350 mm • Bar capacity: 102-103 mm • Main spindle • Nose: ASA A2-11 • Bearing diameter: 160 mm • Spindle bore: 115 mm • C-axis indexing accuracy: 0.001° • Turret • Stations: 24 (option installed; standard 12) • Tool size: 25 mm • Boring bar capacity: 50 mm • Indexing time: 0.15 s • Driven tool speed: 5,000 rpm • Axes: • C-axis rotation: 360° • Rapid traverse • X: 30 m/min • Z: 30 m/min • C: 10 m/min • Tailstock • Type: Rotating tailstock • Quill diameter: 100 mm • Taper: MT5 • Quill travel: 100 mm • Motor / Power Hfedpfx Aajytt A Rensg • Driven tool motor: 7.5 / 1.5 kW • Feed motor: 3.0 / 4.0 / 3.0 kW • Coolant pump motor: 0.4 kW • Electrical power: 46.40 kVA Additional equipment • 315 mm chuck • MORARI steady rest, diameter range 40-200 mm • Three powered radial Eppinger chucks/spindles • Tool presetting system (tool presetter) Technical Specification Counter Spindle No Driven Tools Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25,000-liter mixing tanks, one casting robot, and two release agent robots is available. Output: 225 tons/24h, mold carriers: 42, mixing positions for additive mixing: 10, mixing head type: MQ, max. operating pressure: 180 bar, pressure vessel: 330 bar. Foam types: rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multi-mold foaming is possible. Full documentation is available. An on-site inspection is possible. Hodpfx Ajttbd Neansfg

Kondisi: baru, Tahun pembuatan: 2026, -TFON Kantenverrundungs- und Oberflächenreinigungssystem -Materialkompatibilität: Geeignet für Baustahl, Aluminium und Edelstahl -Arbeitsstärkenbereich: Verarbeitet Materialdicken von 0 bis 120 mm -Kantenverrundung: Erzeugt eine Radius 2-Kantenverrundung für glatte, sichere Kanten und verbessert so sowohl das Erscheinungsbild als auch die Funktionalität des Werkstücks. -Präzise Steuerung: Ausgestattet mit einem Siemens-Automatisierungssystem für präzise und reproduzierbare Steuerung während des gesamten Prozesses. Unabhängige Stationen: Mehrere Bearbeitungsstationen ermöglichen vielseitige Prozesse, sodass verschiedene Arbeitsschritte gleichzeitig oder nacheinander durchgeführt werden können. Tischoptionen: Verfügbare Arbeitstischgrößen: 650 mm, 1000 mm oder 1300 mm – passend für spezifische Produktionsanforderungen. Tischtypen: Flexible Konfigurationen wie Magnet-, Vakuum- oder Magnet-Vakuumtische gewährleisten eine sichere Fixierung unterschiedlicher Materialien und Werkstückgrößen. Hfjdpfx Ashq A T Uoanjg Plasma- und Sauerstofftechnologie: Setzt modernste Plasma- und Sauerstofftechnik ein, um grobe Grate und Schlacke nach dem Zuschnitt effizient zu entfernen – für eine saubere und glatte Oberfläche. Oberflächenreinigung: Entfernt effektiv Oberflächenverunreinigungen wie Rost, Oxide und Zunder und bereitet Teile für Folgeprozesse optimal vor. Kantenverrundung für Beschichtungen: Ermöglicht eine perfekte Vorbereitung der Bauteile zum Lackieren oder Beschichten – gleichmäßige, fehlerfreie Oberflächen. Industrieanwendungen: Ideal für Stahl-Service-Center, Energie-, Bergbau-, Bau- und Automobilbranche – liefert maßgeschneiderte Lösungen für anspruchsvolle, schwere Anwendungen. Gleichmäßige Ergebnisse: Sechs Lamellenräder sorgen für konstant gleichmäßige Kantenradien an allen Teilen. Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder, indem es den Verschleiß minimiert und dauerhaft gleichbleibende Ergebnisse sicherstellt.