Beli Mesin deburring lainnya bekas (48)

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface finishing of both metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from the media. Optional Accessories - Pneumatic sound enclosure - Pneumatic flap control Isdpfx Aen Smbrsa Noht - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing pipe (various types) The images are for reference only. Optional accessories are available at an additional cost.

Tahun pembuatan: 1971, Kondisi: sangat baik (bekas), Manufacturer: SONNENBERG Model: FTM Year of manufacture: 1971 Dimensions: approx. W 1.00 x D 1.00 x H 1.50 m Weight: approx. 500 kg All information without guarantee. Ijdpfxod Sdg Sj Aa Nsht The machine is in very good condition. A powered demonstration can be arranged at any time in our showroom.

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Mesin penghalus dan pengikis seperti baru Ihedeyabraspfx Aa Net Tipe: VKUE 150 Kapasitas: 150 liter Termasuk batu gerinda Tahun pembuatan: 2021 Termasuk sistem filter air

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, panjang total: 500 mm, lebar total: 440 mm, tinggi total: 230 mm, berat keseluruhan: 26 kg, daya: 1,69 kW (2,30 hp), frekuensi input: 50 Hz, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Mesin Mesin Chamfer Logam Merek: Marpol Rasant Cocok untuk penghilang gerinda dan chamfer pada logam (misal baja, aluminium, kuningan), plastik, dll. Ihjdjx U D Afopfx Aa Nst Bekas, berfungsi penuh Sudut chamfer 45° Pengaturan chamfer tanpa tingkat Chamfer maksimum 8 mm x 45° Pisau dilengkapi insert mata karbida Panjang rel pemandu: 400 mm Motor 2 kecepatan, Kecepatan: Tingkat 1: 1420 rpm Tingkat 2: 2840 rpm Daya motor: 1,7/2,3 HP Sambungan: 400 V, 3 fase Berat: 26 kg Ukuran (P x L x T): 500 x 440 x 230 mm Mesin dapat dilihat dan diuji dalam kondisi terhubung listrik. Mesin dijual karena penutupan pabrik yang akan datang (karena pensiun). Penawaran lain kami juga tersedia secara online.

Tahun pembuatan: 2025, Kondisi: baru, EN-20240615-001 Ihedpevfhm Djfx Aa Net

Tahun pembuatan: 2017, Kondisi: bekas, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 2017038, Caracteristici tehnice: ⚙️ Specificații de bază Atribut Valoare Tehnologie Debavurare cu jet de apă la presiune înaltă Presiune maximă Până la 1000 bar Materiale prelucrate Fontă, aluminiu, oțel Tip mașină Masă rotativă sau tunel cu avans pas cu pas Automatizare Braț robotic cu secvență programabilă: Staubli TX60 retrofitat nou!!! Material duză Aliaj cu durată de viață extinsă Construcție Oțel inoxidabil AISI 304 Manipulare piese Fixare mecanică pe paleți customizați Tratare apă Sistem integrat de dezaurare și filtrare 🧰 Funcționalități & Capabilități Debavurare & Spălare: Elimină bavurile libere și așchiile încastrate, inclusiv din găuri intersectate. Programare flexibilă: Suportă diverse geometrie de piese și volume de producție variate. Integrare robotică: Duză montată pe roboți antropomorfi pentru o țintire precisă. Design modular: Configurabil pentru diverse layout-uri și obiective de productivitate. Ihedsxx Nq Tjpfx Aa Njt Operare ecologică: Curățare pe bază de apă cu durată extinsă a băii prin filtrare. Încărcare/descărcare masă manuală: cu posibilitatea a 2 stații de lucru în paralel, echipate cu dispozitive Poka Yoke. Stare utilaj: FUNCȚIONAL - Pompa de înaltă presiune trebuie retrofitată pentru atingerea a 1000 bar (în prezent: 350 bar).

Tahun pembuatan: 2023, Kondisi: baru, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of metallic and non-metallic workpieces. These machines feature a large screening surface and allow for easy separation of workpieces from abrasive media. Optional Accessories - Pneumatic sound enclosure - Pneumatic flap control - Frequency converter - Dosing pump - Solenoid valve - Stand for control panel - Rinsing tube (various types) Ijdpfx Aen Smclsa Noht The images are for reference only. Optional accessories are available at an additional cost.

Tahun pembuatan: 1995, Kondisi: bekas, de-001 Iodpfex Hp Azox Aa Njht

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Mesin deburring kondisi seperti baru Tipe: VKK 200 Iedpfx Aeyabqvsa Nsht Kapasitas: 200 liter Tahun pembuatan: 2021 Termasuk pasir deburring

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas), Machine for electrochemical deburring including automation, rinsing system for removal of electrolyte from the workpiece surface, and filtration unit. Ihodpfelgzbnjx Aa Not

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Spindle speeds 2850 rpm Angle range 0 - 60° (steplessly adjustable) Machine weight approx. 19.5 kg Maximum bevel width 20 mm + face side machining Designed for beveling and deburring straight edges, for so-called FACING – removing an unwanted layer of material from the face end of the workpiece, e.g. resulting from oxy-fuel cutting on sheet metal. Specifically developed for visible bevels and weld seam preparation. Powerful electric drive for extreme loads. Ihsdpfx Ajppgcvoa Nst * High-performance motor * Stepless adjustment of the working angle within the range of 0° - 60° * FACING – edge machining at an angle of 0° for removing undesirable layers after oxy-fuel cutting * Unique mechanical scale for setting the bevel width for higher precision * Very compact and ergonomic design for high productivity * Surrounding protective frame to prevent damage and provide versatile gripping options * With appropriate accessories, pipes from D=150 mm can also be processed * Additional adjustable handle - Bevel width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We can optionally offer you a pipe beveling device (D=150mm) for this machine.

Tahun pembuatan: 2003, Kondisi: bekas, en-001 Ihodpfx Aaju Ngc Nj Nst

Kondisi: baru, DM100 ZC - performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore) with an abrasive belt and removes heavy burrs in the initial step. The second station is equipped with 2 counter-rotating cross belts with abrasive blocks and rounds the edges of the entire product, both inside and outside, in a second step. A major advantage is deburring products with surface protection foil, as only the edges are processed without damaging the foil. Technical Data – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross-belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Ihodped Hintofx Aa Not Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Current consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Tahun pembuatan: 1989, Kondisi: sangat baik (bekas), Inventory Number: 2939 Manufacturer: Held Year of manufacture: 1989 Machine number: 3356 Type / Model: E90 Contact surfaces: 800 x 50 mm Speed: 8,400 rpm Connection: 1.1 kW Accessories/Equipment: Condition: good Weight: approx. 0.1 t Footprint: 550 x 500 mm Ijdpfx Aou Un N Eea Nsht Dimensions: 1,000 x 500 x 1,000 mm

Kondisi: baru, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Chamfering System UZ30 EXPRESS Maximum chamfer width 30 mm with automatic feed Stationary UZ30 EXPRESS is one of the best solutions for chamfering both large and small batches, as well as smaller workpieces or long, narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be set up to 3.5 m/min. For longer workpieces, the machine can be equipped with an additional infeed and outfeed table, expanding the working surface to an impressive 2,824 mm. - The machine is designed for chamfering steel, aluminium, copper, and other materials such as flat bars, pipes, and welding bevels - High-quality milling ensures mirror-finish surfaces - Feed control via rotary knob - Cutter speed is regulated by frequency inverter - Additional optional accessories available for pipe chamfering - Option to extend the worktable to a total of 2,824 mm - Fast and precise machine adjustment via gauge Technical data: Approximate maximum chamfer widths: at 30° - 30 mm / at 45° - 20 mm / at 60° - 17 mm Adjustable bevel angle: 30° - 60° (stepless) Sheet thickness range: 3 - 100 mm Pipe chamfering: OD 102 mm - OD 156 mm Ijdpfor I E Exsx Aa Noht Milling motor power: 4,000 W Milling head speed: Adjustable by frequency inverter Feed rate: 0.6 – 3.5 m/min Weight: 400 kg Dimensions: 825 x 1,200 x 1,615 mm Number of indexable inserts: 5 pieces

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width: 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic feed beveling machines available on the market. It is suitable not only for workshops, but also for on-site assembly. The machine features a stepless adjustable working angle system. Thanks to the special design of its drive system, the UZ18 Hardworker is also suitable for processing harder materials. The machine comes equipped with an automatic feed. Working with the UZ18 Hardworker is therefore highly convenient. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Operating range for sheet thickness: 6 – 40 mm * The bevel angle can be easily adjusted steplessly from 15° to 50° without the need for part replacement * Double-sided bevel (X, K) without material handling * Simple connection to a 3D manipulator for easier operation and handling * Quiet operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine can process large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces can be inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm Iodpfsk Egrtox Aa Njht - Steplessly adjustable angle: 15° - 50° - Operating range for sheet thickness: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We also offer an optional (mobile) 3D manipulator for this unit.

Kondisi: baru, en-GB Ihsdpfok Uqhaox Aa Njt

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speeds 3600 rpm Angle range 30 - 60° (continuously adjustable) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width of 3 mm – Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable processing angle Iedpfeppgcrex Aa Nsht * Suitable for steel, stainless steel, aluminum, and other materials * Precise, heavy-duty, extra-long mechanical guide - Number of indexable inserts: 5 pcs. (four cutting edges) - Feed: manual

Kondisi: baru, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic feed beveling machines on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with automatic feed, making operation of the UZ12 ULTRALIGHT very convenient. * Suitable for conventional steels (up to a tensile strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Sheet thickness working range: 3 – 35 mm * Beveling of pipes from an internal diameter of 95 mm * Variable adjustment of the required bevel angle using interchangeable holder kits for each specific angle * Double-sided bevel (X, K) without handling the material Ihodpfx Ajppgcyea Njt * Quiet operation * Equipped with automatic feed * For stationary or mobile use * The machine can process large workpieces without additional support at a speed of 1.8 m/min * Smaller workpieces can be inserted directly into the machine * Lightweight and compact design, manageable by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable kits) - Sheet thickness range: 3 – 35 mm - Motor: 400 W - Feed speed: 1.8 m/min - Dimensions: 470 x 294 x 523 mm We are pleased to optionally offer you a mobile 3D manipulator for this unit.

Kondisi: baru, Model designation Chamfering system UZ12 ULTRALIGHT Iedpfxsk D Nyis Aa Noht

Kondisi: baru, Model designation Iodpfx Aajk Au Dro Noht B3 deburring/chamfering machine

Kondisi: baru, Model designation Chamfering system B22 ZERO Ihodjk Au Dvjpfx Aa Njt

Kondisi: baru, Dimensions: internal 1160 x 870 x 850 mm Air consumption: 400 – 800 l/min Air pressure: 3.4 – 8.0 bar Maximum workpiece weight: 150 kg Total power requirement: 1.2 kW Weight: 160 kg Dimensions (LxWxH): 1320 x 1200 x 1760 mm Item no.: 6204004 Features: - Very large, top-opening front hatch - Suitable for a variety of blasting media (e.g., quartz, glass beads, plastic beads, etc.) - Integrated extraction system with replaceable air filter - Blasting gun without trigger * Airflow is controlled via foot pedal - Four fluorescent tubes (230 Volt) Ihsdpfxoxabugs Aa Nst * In a separate housing with protective glass and replaceable protective film - Switch for extraction and cabin lighting * Working pressure is regulated via a pressure regulator with manometer - Blast head (usable grain size: 0.125 – 0.42 mm) - Cross struts on the support feet * Easy transport by pallet truck - Blasting media container - Dust extraction - Foot switch - Operating manual in German Scope of delivery: - High-quality blasting gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement films for the inspection window

Tahun pembuatan: 2015, Kondisi: bekas, Grinding wheel diameter max. 150 mm Isdpswp S U Esfx Aa Nsht Speed 2850 rpm Total power requirement 0.45 kW Dimensions 465 x 316 x 302 mm Weight 10.7 kg NEW PRICE: ~ 200.00 EURO Description - Double-ended bench grinders from OPTIMUM – a quality product for trade and industry - Heavy-duty, durable industrial design with maintenance-free motor for continuous operation - Housing made from die-cast aluminium - Long service life and smooth running thanks to balanced rotor with high-quality ball bearings - Spark guards on each grinding wheel reduce spark emission - Sturdy, adjustable workpiece support - Shatterproof safety screens - Vibration-absorbing rubber feet - Two universal corundum grinding wheels

Tahun pembuatan: 2025, Kondisi: baru, Working width: 1000 mm Workpiece thickness (max): 0.5–50 mm Abrasive belt width: -- mm Machine weight approx.: 2.5 t The SBM-L 1000 G1S2, which operates using a dry process, allows for alternating processing of steel, stainless steel, and aluminum. It deburrs and rounds the edges on external and internal contours of stamped, laser-, fine plasma-, or waterjet-cut workpieces with a thickness of up to 50 mm on both sides in a single pass. * Two grinding units, one each on the top and bottom sides, remove splatter and light burrs from the outer and inner edges of sheet metal. * Four abrasive belts in total, two on the top and two on the bottom, process sheet metal simultaneously on both sides. All edges are either smoothed or rounded, depending on the tool settings. * Double-sided processing eliminates time-consuming flipping and double handling of workpieces. * Each pair of units can be switched on/off or adjusted independently according to application requirements. * Includes Siemens S7 control system: - Simple and convenient operation via an intuitive user interface - High operational safety with 3 password-protected user levels - Integrated program memory - USB/RJ45 interface for data exchange or connection of external devices (e.g., barcode scanner) - Direct material thickness input via touch panel - All axes automatically adjust to preset material thickness - Standby position for deactivated units - Service-friendly (e.g., plain-text fault messages) Comprises: - SBM-L 1000 G1S2 grinding machine (kit) - 4x SBM 1000 grinding belts with rib P60 SiC - SBM-L 1000 grinding belt L=3125 W=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry extraction - Standard pipework DDE 3002 / WDE 3002 for SMD 123, SMD 133 Additional detailed technical data available upon request. The machine is available immediately from stock Niederlangen. Ihedpfx Aaeuia Dqe Net