Mesin briket / mesin briket

mütek Systemtechnik MPP 110

Production time for the machine is approx. 3.5 months

Very robust machine with high pressing force
- also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible.

Our best-selling briquetting press series:
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio

Optional features:

Surcharge for cooling unit: + €3,995 net (can also be retrofitted later)
* Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil
* Cooling unit recommended for continuous operation exceeding 3.5 hours at a time.

Large pre-compactor chamber: + €1,975 net
Recommended for light input materials such as wood shavings

Commodity code: 84793010
Briquette diameter: 65 mm
Front bushing: 65 mm
Max. briquette stroke: 50 mm
Optimal briquette stroke: 50 mm
Capacity (material-dependent): up to 110 kg/h*
Kjdpfx Acsffh Ate Heln
Last test: approx. 87 kg/h
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter

Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1925 mm
Width: 1100 mm
Height: 1500 mm
Weight: 800 kg
Oil capacity: 110 liters
Silo diameter: 1000 mm
Silo capacity: approx. 0.7 cbm
Pump: 37 liters
Hydraulic pre-compactor
Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw
Pressing jaw cooling via water tank (to be supplied by customer)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
Continuous briquette strand option: yes (material-dependent)
CE compliant

Requirements for raw material:
- Moisture content (atro) must be at least 6% and no more than 18%
- Maximum chip length 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.