Mesin penghancur kayu

mütek Systemtechnik MRZ 630

Special offer for our demonstration machine
Another unit available immediately (ex works Neckartailfingen)
approx. 8 operating hours.

Suitable for shredding all types of residual wood and also pallet sections.

Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently.

A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket.

Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material).

*Conveyor belt and overband magnet available at an extra charge.

+ powerful 18.5 kW motor
+ concave knives
+ large high-performance gearbox
+ special load-dependent pusher control

Customs tariff number: 84659600
Motor: 18.5 kW; 400 V – 50 Hz – 3 ph.
Knives: 15 pieces, rotatable multiple times
Optional double knife row: + €995 net

Rotor diameter: 260 mm
Control system: Siemens S7-1200 PLC
Cutting chamber opening: 630 x 820 mm
Filling volume: approx. 0.6 m³
Hydraulically operated pusher
Screen perforation selectable (10–30 mm)
Extraction port: Ø 160 mm
Weight: approx. 1,300 kg (depending on equipment)
Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm
Moisture content: < 30% atro

Standard features:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star/delta start
- Rapid hydraulics
- Auto stop when rotor idles
- Rotor speed 70–90 rpm for high throughput
- Cycling control to avoid idle times
- Performance-boosting step control for hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
- MADE IN GERMANY

Shredder options:
- Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net

- Folding conveyor belt: + €8,770 net
Nwodpfx Aaedwktks Ueg
Horizontal section: 1,200 mm
Inclined section: 2,500 mm
Angle: adjustable 0–60°
Discharge height: approx. 2,000 mm +/- 100 mm

- Overband magnet: + €5,980 net
- Control system for conveyor & overband magnet: + €2,750 net
(Start and stop synchronized with chipper)
- Hopper extension: + €940 net
- Eco rings: + €1,980 net (recommended for >15% hardwood)
- Special scraper: + €990 net (recommended for veneer or paper)
- Double knife row: + €995 net

Raw material requirements:
- Moisture content (atro) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.