Beli Mütek Systemtechnik Mrz 630 bekas (1.942)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Special offer for our demonstration machine Another unit available immediately (ex works Neckartailfingen) approx. 8 operating hours. Suitable for shredding all types of residual wood and also pallet sections. Pallets must be prepared with a jigsaw or chainsaw so that they fit upright into the hopper – see photo 2. Ideally, they should measure approx. 40x20x20 cm, so that the wood can lie flat on the pusher floor. This is when the machine operates most efficiently. A hydraulically operated pusher moves along the base of the shredder and presses the material against the rotor based on load. The material is shredded until it passes through the screen basket. Throughput capacity: up to 200 kg per hour (*depending on the screen and preparation of the material). *Conveyor belt and overband magnet available at an extra charge. + powerful 18.5 kW motor + concave knives + large high-performance gearbox + special load-dependent pusher control Customs tariff number: 84659600 Motor: 18.5 kW; 400 V – 50 Hz – 3 ph. Knives: 15 pieces, rotatable multiple times Optional double knife row: + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Kdjdpodwktkefx Acbjt Cutting chamber opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (10–30 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1,737 x 1,167 x 1,650 mm Moisture content: < 30% atro Standard features: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - Rapid hydraulics - Auto stop when rotor idles - Rotor speed 70–90 rpm for high throughput - Cycling control to avoid idle times - Performance-boosting step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Shredder height increase by 30 cm (conveyor belt preparation): + €2,080 net - Folding conveyor belt: + €8,770 net Horizontal section: 1,200 mm Inclined section: 2,500 mm Angle: adjustable 0–60° Discharge height: approx. 2,000 mm +/- 100 mm - Overband magnet: + €5,980 net - Control system for conveyor & overband magnet: + €2,750 net (Start and stop synchronized with chipper) - Hopper extension: + €940 net - Eco rings: + €1,980 net (recommended for >15% hardwood) - Special scraper: + €990 net (recommended for veneer or paper) - Double knife row: + €995 net Raw material requirements: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for increased throughput performance Kdjdpfeb Ny Eysx Acbst We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net (Recommended for more than 20% hardwood content) - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 97 09 05 010 1/2, tekanan filter: 15 batang, tekanan: 15 batang, ketebalan kue: 25 mm, masa garansi: 12 bulan, tahun perombakan terakhir: 2026, tekanan kerja: 380 batang, Jumlah ruang: 25, tegangan kontrol: 24 V, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Selamat siang, Kami menjual dua unit mesin filter tekan tipe ruang yang identik, tersedia di gudang, telah direkondisi secara menyeluruh, dan dengan demikian kondisinya seperti baru. Kdjdpfezt Nc Eox Acbet Tersedia segera! Foto terlampir: Mesin filter tekan tipe ruang – Pabrikan: MSE Dengan ketebalan pelat: 50 mm Masing-masing dilengkapi dengan satu set pelat tambahan Ketebalan kue: 25 mm Kapasitas: sekitar 210 liter Panjang efektif sekitar 1800 mm (34 pelat) Ukuran: 630x630 mm Dimensi: 3700x1100x1800 mm (p x l x t) Berat kosong: 2700 kg Saluran keluaran filtrat terbuka Pengangkutan pelat secara manual Sistem hidrolik elektrik. Mohon informasikan kepada kami jika Anda tertarik dengan mesin ini. Kami dengan senang hati akan memberikan penawaran khusus. Harga berdasarkan permintaan.

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Kedpfxjv Rpxlo Acbjdt Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, The ideal machine for cable shredding Featuring optimized cutting geometry Approximately 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, reversible multiple times Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of blades + €1,990 net (28 instead of 14) - Surcharge for 4-sided segmented floor + €2,170 net (Prevents jamming of the pusher. Recommended when shredding plastics, paper, or veneer with a thickness less than 3 mm.) - Shredder height increase by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net Kodpfxsgmfa Ae Acbsdt - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Ref. Bea9ia3l27 Feed material requirements: - Mineral impurities such as sand, stones, etc., will increase wear. We would be pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, Mesin Penghancur Satu Poros MRZ 530 Termasuk: Rotor Eco Ring (untuk mengurangi kebutuhan energi) Pilihan: Pengikis veneer dan kertas + €970 (harga bersih) * direkomendasikan untuk material yang sangat tipis dengan ketebalan kurang dari 3 mm Mesin penghancur satu poros mütek MRZ 530 kami menghancurkan berbagai jenis material seperti sisa kayu dari semua jenis, kayu lunak, papan serpihan dan serat keras, palet, kayu konstruksi, kayu bekas, karpet, kabel, kertas, karton, dan plastik. Mesin ini memiliki konstruksi yang kokoh, yang menjamin kualitas yang konsisten dalam pengoperasian berkelanjutan. Dengan senang hati kami menyediakan pengujian gratis dengan material Anda. Kami mengundang Anda untuk mengunjungi kami di Neckartailfingen untuk keperluan ini. Anda juga dapat mengirimkan material Anda kepada kami melalui perusahaan ekspedisi, dan kami akan mendokumentasikan pengujian dengan gambar dan video. Data mesin: Kdedpfxod Db N Is Acbst Motor: 11 kW; 400 V - 50 Hz - 3 fasa, Pisau: dapat diputar beberapa kali, Diameter rotor: 260 mm, Pengendali: PLC Siemens S7-1200, Corong (mm): 510 x 810 mm, Volume corong: sekitar 0,4 m³, Penggeser yang dioperasikan secara hidraulik, Lubang saringan (10 - 40 mm), dapat dipilih, Sambungan penghisap Ø 160 mm, Berat: sekitar 1.000 kg, Dimensi: sekitar 1550 x 1100 x 1640 mm, Kadar kelembapan bahan baku: harus di bawah 30% (kadar air kering). Termasuk sebagai standar: • Sistem hidraulik cepat • Rotor profil • Kotak kontrol dengan pengendali PLC Siemens • Sistem start otomatis (bintang/segitiga) • Sistem mati otomatis saat rotor tidak beroperasi • Saluran penghisap yang dapat dilepas • Kecepatan 70 - 100 RPM untuk kinerja throughput yang lebih tinggi • Pengendali siklik untuk menghindari waktu henti • Pengendali langkah yang meningkatkan kinerja penggeser hidraulik • Panduan yang stabil untuk penggeser hidraulik Pilihan tambahan untuk mesin penghancur: - Ketinggian mesin penghancur ditingkatkan 30 cm (persiapan untuk ban berjalan) + €1.980 (harga bersih) - Ban berjalan berengsel + €8.770 (harga bersih) Bagian horizontal: 1200 mm Bagian miring: 2500 mm Sudut: dapat diatur antara 0-60 derajat Ketinggian keluaran: sekitar 2000 mm + - 100 mm - Magnet pita + €5.980 (harga bersih) - Pengendali ban berjalan dan magnet pita + €2.750 (harga bersih) (Start dan stop disinkronkan dengan mesin penghancur) Persyaratan untuk bahan baku: - Kadar kelembapan (kadar air kering) harus di bawah 30% - Logam dan kontaminan mineral seperti pasir, batu, dll. akan menyebabkan peningkatan keausan.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. Kdsdpfx Acegl Nlmsbst + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This is the ideal machine for shredding bulky, lightweight aluminium chips or turnings. Not suitable for processing solid aluminium parts. Included features: + Optimized cutting geometry + Customized pusher control + Load-dependent, hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 40x40 mm, multiple cutting edges can be rotated Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Kdsdpfx Acegmh H Tsbst Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as required (15 - 40 mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Shredder height increase by 30 cm (preparation for conveyor belt) + €2,990 net - Angled conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport Kdjdpfogfm Rysx Acbot •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Kjdpfx Acsffh Atobsdt Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Professional machine for plastic shredding Base unit starting from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced power requirement) - Minimal cutting gap between rotor knives and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control system: PLC Cutting chamber opening (top): 600 x 800 mm Parts should be max. approx. 500 x 500 mm* *Height is less critical Hydraulically actuated ram Screen perforation of your choice (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage size reduction process with an additional MVZ granulator (screens 5–15 mm) is recommended. Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Additional options at extra cost: - Raise shredder by approx. 25 cm (preparation for conveyor discharge) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net Kdsdpfed H R Sxjx Acbet - Conveyor belt and overbelt magnet controls + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start/stop for conveyor belt + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metals and mineral impurities such as sand, stones, etc. will cause increased wear. We are happy to arrange a free test using your material at our facility in Neckartailfingen. Alternatively, you can send your material via freight forwarder and we will document the test with photos and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic or extremely hard and heavy plastics, as this will impact system durability. --- Optional next larger machines: Base unit: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Parts should be max. approx. 720 x 700 mm* *Height is less critical from €39,995 net (options according to requirements) Base unit: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Parts should be max. approx. 900 x 700 mm* *Height is less critical from €49,975 net (options according to requirements) Base unit: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Parts should be max. approx. 1,200 x 700 mm* *Height is less critical from €79,975 net (options according to requirements)

Kondisi: baik (bekas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection: 160 mm, Fan: 2.2 kW Airflow rate: 1,850 m³/h, 400 V Kjdpfx Aerb D Necbodt

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Kdedechuvrspfx Acbot

Kondisi: seperti baru (mesin pameran), Unit demo dengan 7 jam operasional tersedia segera (dari pabrik Neckartailfingen) Mesin penghancur MRZ 830 Nomor tarif barang: 84659600 Tahun pembuatan: 2023 Bukaan umpan 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 fasa Pisau: dapat diputar berulang kali Penggeser yang dioperasikan secara hidrolik Lubang saringan sesuai pilihan (10 - 40 mm) Berat sekitar 1.600 KG Dimensi (p x l x t) sekitar 2290 x 1420 x 1750 mm Kopling turbo Termasuk sebagai standar: - pengaktifan otomatis bintang/segitiga - hidrolik cepat - mati otomatis saat rotor tidak beroperasi - kecepatan putaran 70-90 RPM untuk kapasitas tinggi - kontrol siklus untuk menghindari waktu tidak aktif - kontrol langkah yang meningkatkan kinerja penggeser hidrolik - panduan Pertinax untuk penggeser hidrolik - kaki mesin peredam getaran - Sesuai dengan standar CE Mesin penghancur ini dirancang untuk menghancurkan kayu alami, papan serpihan, dan papan MDF, serta bahan lain setelah diuji dan disetujui oleh produsen. Termasuk: - Menaikkan mesin penghancur setinggi 30 cm (persiapan untuk konveyor) Ksdpfxjv Sqrpo Acbodt Opsi tambahan untuk mesin penghancur: - Konveyor bengkok + 8.770 € (belum termasuk PPN) Bagian horizontal: 1200 mm Bagian yang menanjak: 2500 mm Sudut: dapat disesuaikan dari 0-60 derajat Tinggi pengeluaran: sekitar 2000 mm + - 100 mm - Magnet di atas konveyor + 6.780 € (belum termasuk PPN) - Kontrol untuk konveyor dan magnet di atas konveyor + 2.750 € (belum termasuk PPN) (Mulai dan berhenti masing-masing disinkronkan dengan mesin penghancur) Persyaratan untuk bahan baku: - Kadar air (atro) harus di bawah 30%, - Logam dan kontaminan mineral seperti pasir, batu, dll. akan menyebabkan peningkatan keausan.

Tahun pembuatan: 2010, Kondisi: bekas, Pengendalian ketinggian cairan yang presisi untuk mendeteksi botol yang kurang atau terlalu penuh. Mesin (tambahan): Pengendalian ketinggian pengisian P maks: 10 bar Arus: 8 A Tegangan: 230 V Frekuensi: 50/60 Hz Panjang: 1,2 m Lebar: 0,93 m Tinggi: 2,2 m Perlengkapan: Pendeteksian ketinggian pengisian dan penutup, termasuk penyemprotan bagian mulut botol sebelum pengisian dan pembuangan dengan meja penampung. Berat: 350 kg Kedsztzcdjpfx Acbjdt

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), de_to_hu_it_lt_001 Kdsdpfxeyu T Enj Acbjt

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood Another machine available immediately (ex works Neckartailfingen) - Motor: 18.5 kW; 400 V - 50 Hz - 3 phase - Knives: 14+2 pieces, 40x40 mm, reversible multiple times - Rotor diameter: 260 mm - Control: Omron PLC - Cutting chamber opening: 600 x 800 mm - Hopper volume approx. 0.6 m³ - Hydraulically actuated ram - Screen perforation selectable (12 – 40 mm) - Extraction nozzle Ø 160 mm - Weight approx. 1,300 kg - Dimensions (LxWxH) approx. 1,737 x 1,167 x 1,650 mm The following options are available at an additional cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the ram from jamming; recommended for materials less than 3 mm thick) - Shredder height increase by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely needed; enclosed, even more durable rotor bearing. Worth considering for screens < 15 mm or for a high proportion of fines. Not necessary if bearings are greased every approx. 2 weeks in operation) Raw material requirements: - Moisture content (dry basis) must be below 30% Kjdpfxed E R D Ss Acbodt - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear We would be happy to offer you a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Tahun pembuatan: 2020, jam operasional: 100 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 300 kg, panjang total: 1.330 mm, lebar total: 840 mm, tinggi total: 1.870 mm, sambungan udara terkompresi: 6 batang, jenis arus masuk: AC (pendingin udara), TL-6040 Kdodpfjxuqtbjx Acbot

Kondisi: sangat baik (bekas), NOMOR KATALOG 7915 DATA TEKNIS lebar poros: 640 mm jumlah pisau: 4 buah ketebalan maksimum elemen yang dikerjakan: 200 mm – dari atas: ratchet/anti-backlash poros pengumpan bergerigi, penarik penekan poros planer penekan poros keluaran halus, penarik – dari bawah: rol yang dapat diatur di meja bawah: 2 buah motor: 7 kW pengaturan kecepatan feeding secara stepless dimensi (panj/lebar/tinggi): 1800 x 1250 x 1150 mm berat: 1250 kg KEUNGGULAN Kdsdszrltqjpfx Acbet – buatan Bulgaria – pengaturan kecepatan feeding yang stepless – mesin planer thickness bekas, kondisi sangat baik Harga netto: 9500 PLN Harga netto: 2260 EUR sesuai kurs 4,2 EUR (Harga dapat berubah mengikuti fluktuasi nilai tukar)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, de-hu-it-lt-001 Kdjdexmkcmopfx Acbet

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, luas filter: 18 m², tekanan: 10 batang, ketebalan kue: 25 mm, berat keseluruhan: 2.000 kg, Jumlah ruang: 28, Filter pers dengan ruang yang sudah digunakan dan diperbarui, merek Häcker, Tipe KFP 630/28. Ukuran pelat 630 x 630 mm, volume 220 liter, luas area filtrasi 18 m². 28 pelat filtrasi, ketebalan endapan 25 mm, tekanan maksimum 10 bar, dengan kain filter berwarna hitam berbahan PP. Kdodpfx Acjz Dgbwsbot Dilengkapi dengan pompa piston Häcker yang terpasang (kapasitas aliran 2,5 m³/jam), dengan tangki udara bertekanan, mini-kompresor. Dilengkapi dengan lemari listrik. Filter pers dipasang di dalam kontainer berukuran 20 kaki yang kering dengan bukaan di bagian bawah (denah tersedia). Dimensi sekitar 3200 x 1000 x 1500 mm, berat 2000 kg. Dilengkapi dengan dokumen teknis.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 300 kg, Tray Loader TL-6040 – Transfer Unit – 2-lane stacker/destacker module for the efficient transport of trays (containers) for printed circuit boards. The empty trays are removed from the transport cart, automatically positioned, and provided for loading. After loading, the trays are automatically stacked onto a second transport cart. • Compact design • Small footprint • Stacking/destacking module • Transport cart • Standard tray size: 400 x 600 mm Kdodpfxsunh I Ns Acbot • Robust welded steel frame • W x D x H: 840 x 1,330 x 1,870 mm • Manual operating height: 930 – 1,050 mm • Compressed air: 0.6 mPa (6 bar), oil-free, filtered, dry • Average consumption approx. 10 l/min • Ambient temperature: +18°C to +30°C • Weight approx. 300 kg

Kondisi: baru, Tahun pembuatan: 2026, Mesin ideal untuk penghancuran kayu lunak. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Diameter rotor: 260 mm, Pendorong digerakkan secara hidrolik Lubang saringan sesuai pilihan (12 - 40 mm) Diameter saluran hisap Ø 160 mm Berat sekitar 1.100 kg Dimensi (p x l x t) sekitar 1805 x 1118 x 1650 mm Warna: biru / abu-abu Kedpfx Ajwzarcscbjdt Persyaratan bahan baku: - Kadar air (atro) harus di bawah 30 % - Logam dan kontaminan mineral seperti pasir, batu, dsb. meningkatkan keausan. Kami dengan senang hati menawarkan pengujian gratis menggunakan material Anda. Anda dapat datang ke lokasi kami di Neckartailfingen, atau kirimkan material Anda melalui ekspedisi dan kami akan mendokumentasikan pengujiannya dengan foto dan video.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 37.830 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, volume langkah: 392 cm³, panjang total: 6.400 mm, lebar total: 1.950 mm, tinggi total: 2.210 mm, berat keseluruhan: 12.140 kg, ARBURG Allrounder 630 S 2500-800 Nomor Inventaris: 503409 Produsen: ARBURG Tipe: Allrounder 630 S 2500-800 Pengendali: Selogica Tahun Pembuatan: 2012 Jam Operasi: 37830 jam Kodpfoz A Tgksx Acbjdt Data Teknis Sisi Penutup Gaya Penutup: 2500 kN Dimensi Cetakan (tinggi x lebar): 630 x 630 mm Ukuran Plat (tinggi x lebar): 900 x 900 mm Ketinggian Pemasangan Minimal: 300 mm Ketinggian Pemasangan Maksimal: 700 mm Jarak Antar Plat Maksimal: 1300 mm Jarak Pembukaan: 600 mm Langkah Pendorong: 225 mm Gaya Pendorong: 90 kN Diameter Pusat Plat Bergerak: 160 mm Diameter Pusat Plat Tetap: 160 mm Data Teknis Sisi Injeksi Diameter Sekrup: 50 mm Volume Langkah: 392 ccm Tekanan Injeksi: 2000 bar Panjang Sekrup: 20 l/d Langkah Sekrup: 200 mm Kecepatan Putar Sekrup: 60 rpm Torsi Sekrup: 1000 N Laju Injeksi Bebas: 300 g/s PS Jumlah Zona Pemanas: 8 Panjang Nozel: 400 mm Dimensi & Berat Dimensi Mesin (panjang x lebar x tinggi): 6,4 m x 1,95 m x 2,21 m Berat Total: 12140 kg Peralatan Teks Layar: Bahasa Jerman Teks Layar: Bahasa Inggris Stop Kontak CEE 16A Antarmuka Compact Flash untuk Penyimpanan Data Penggerak Inti Hidraulik 1x Katup Udara 2x Mesin dengan Sistem Pendingin Air Mesin tanpa Hopper Material Elemen Perata Antarmuka EUROMAP 67 Handling Antarmuka OPC Stop Kontak Schuko 10A Unit Seleksi Pemanas Cetakan 12x

Kondisi: baik (bekas), Tahun pembuatan: 2010, panjang sabuk konveyor: 900 mm, lebar sabuk konveyor: 1.300 mm, Panjang: 900 mm Lebar: 1300 mm Kdodpfszd T Iajx Acbot