Mesin briket

mütek MFP

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Redpfx Aded Nnwlj Rer Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baru, Dimensions: 1900 mm length, 810 mm width, 860 mm height. Internal dimensions (LxWxH): 1.5 x 0.74 x 0.78 m. Machine weight approx. 200 kg. Required space approx. 1.9 x 0.81 x 0.86 m. For collecting and disposing of bulk materials and industrial waste. - Tipping container – forklift attachments for internal storage of bulk materials - Powder-coated in standard colors: RAL 5010 blue, RAL 6011 green, or RAL 7016 anthracite grey; special paint upon request - Tipping mechanism with base plates for swivel and fixed castors - Drainage facility - Sturdy base frame with fork sleeves - Favorable load center - Robust sheet steel construction with reinforced edges Rsdpsgvqz Iefx Ad Ror Container volume: approx. 600 l

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Rjdpfocnw U Dox Ad Rjr Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: baru, Tahun pembuatan: 2025, Output capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper volume: 0.38 m³ Power consumption: 4 kW Machine length: 1,860 mm Rjdpfx Adopfatpj Rsr Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Pusat kerja Biesse Rover A 1542 Area kerja X: 4140 mm Area kerja Y: 1560 mm Area kerja Z: 245 mm Electrospindle 5-sumbu, dudukan HSK-F63 Kepala bor vertikal: 17 Kepala bor horizontal di X: 6 Kepala bor horizontal di Y: 4 Rsdpfxsyh Nd Rs Ad Rer Mata gergaji untuk alur Penukar alat dengan 25 posisi Meja kerja dengan 8 balok

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Poros TERSA dengan 4 pisau, motor 5,5 kW 400 V, 50 Hz, perangkat start dan rem elektronik. Penyesuaian meja ketebalan dengan tombol untuk pengaturan cepat atau lambat, serta penyesuaian presisi hingga 1/10 mm. Penghitung jam kerja terintegrasi. Meja ketebalan pada 4 spindel penyangga dan dibimbing 4 arah. 2 kecepatan umpan: 7 dan 14 m/menit. Satu rol masuk dan satu rol keluar karet. 2 saluran hisap Ø 160 mm. Penutup geser untuk ekstraksi di atas. Perlengkapan pelindung mesin serut SUVAMATIC. Daya motor 7,5 kW. Kontrol posisi inkl. pemantauan sensor. Rodpfx Adsx Ey Tzs Ror

Kondisi: siap digunakan (bekas), Including SBM 45 incline belt conveyor and ZMR 3/3-130 counting machine. Rodpshncwisfx Ad Rsr

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Rsdpfx Ajxdl Rajd Ror Thickness: 10 - 60 mm Active center stop: Max. length 600 mm Configuration: - Horizontal drilling unit with 3 individually selectable spindles, spindle spacing 32 mm - 1 dowel insertion unit (spaced 32 mm from the first drill spindle) - Glue nozzle with adjustable glue dosage - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimensions: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel supply 1. BASE MACHINE - Robust steel frame construction - Axis movement in X, Y, and Z directions - Ball screw drive (Y and Z axes) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side fences as well as rear fence rail - Pneumatically lowerable center stop, manually controlled via selector switch - 6 top hold-down cylinders, manually adjustable - Central lubrication Power control PC85T Modern control system based on Windows PC

Kondisi: baru, Tahun pembuatan: 2023, gaya penekanan: 120 t, panjang total: 3.000 mm, lebar total: 1.300 mm, suhu operasional: 120 °C, diameter silinder: 85 mm, lebar bukaan: 400 mm,

Kondisi: baru, Wood Briquetting Press Amis ABP 60 L -Exhibition Machine- ----- Technical Data ----- Briquette Ø: 60 mm Hydraulic Unit: 3 kW, 140 bar Voltage: 400 V Frequency: 50 Hz Circuit Protection: 16 A Output approx.: 20–35 kg/h Weight approx.: 300 kg - Extremely simple operation - Hydraulic control system - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as controllers, sensors, or complicated controls - Large feed hopper - Hardened briquette tongs - Replaceable pressing rod - Pressing without the need for additives - Thanks to the pre-compressor, even voluminous shavings can be processed - No adjustments or monitoring of pressure required - new exhibition machine - Redpfxeu R Sxxj Ad Ror