Beli Mütek Mfp bekas (82)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Dcodpfefci D Asx Agyok Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear Dcjdpfxjd Nnwls Agyjk --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, lebar sabuk konveyor: 345 mm, Konveyor Sudut MFP Nomor Inventaris: 503713 Jenis Mesin/Perangkat: Konveyor Produsen: MFP Tipe: Konveyor Sudut Tahun Pembuatan: 2015 dengan sabuk pelat engsel plastik Dcsdezrna Tspfx Agyjk 200 cm x 60 cm x 150 cm (70 cm panjang bagian masuk) Konektor: 16 A Lebar Sabuk: 345 mm Jarak Antar Tonjolan: 300 mm Tinggi Tonjolan: 30 mm

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, en Dedpfxjx Svrte Agyeck

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, Masih ada satu mesin yang tersedia segera! Mesin sangat kokoh dengan daya tekan tinggi—juga cocok untuk menghasilkan kualitas briket yang bisa dijual* tergantung pada jenis material. Silinder tekan berukuran besar dan diameter briket 80 mm memungkinkan hal ini. Seri mesin briket terlaris kami + Teknologi sederhana dan teruji, sangat minim risiko kerusakan + 25 tahun pengalaman, pengembangan berkelanjutan, dan keahlian + Ribuan mesin beroperasi dengan pelanggan yang puas + Rasio harga-kinerja terbaik Biaya tambahan untuk perangkat pendingin: €4.995 net (bisa ditambahkan kemudian) * Mendinginkan tang penjepit dan oli hidrolik (direkomendasikan jika mesin beroperasi lebih dari ±3,5 jam tanpa jeda) Diameter briket: 80 mm Bushing depan: 125 mm Langkah briket max.: 100 mm Langkah briket optimal: 80 mm Kapasitas (tergantung material): hingga 200 kg/jam max.* *tergantung berat jenis Dodpfx Aexfwdogyeck *berdasarkan berat jenis 200 kg per meter kubik Daya motor: 9,2 kW 400 Volt / 50 Hz / 3-Phase Panjang: 2095 mm Lebar: 1600 mm Tinggi: 1700 mm Berat: 1250 kg Kapasitas oli: 220 liter Diameter silo: 1200 mm Volume silo: ±1 m³ Pompa: 75 liter Pre-compactor hidrolik Opsi pendinginan tang penjepit: ya, dengan aksesoris khusus Tang Penjepit Berpendingin Opsi pendinginan oli hidrolik: ya Pendinginan tang penjepit dan oli hidrolik dengan perangkat pendingin (aksesoris khusus) Opsi pemantauan level pengisian: ya Opsi briket tipe string: ya (tergantung material) Opsi slider pengisi besar: ya, dengan aksesoris khusus slider pengisi besar Sesuai CE Persyaratan bahan baku: - Kadar air harus antara 6 hingga max. 15% - Panjang serpihan maksimal 20 mm - Suhu ruangan pemasangan minimal +5°C - Pengisian bahan harus bebas dari logam dan kontaminasi mineral seperti pasir, batu, dll. Kerusakan pada alat press dan/atau keausan yang meningkat bisa terjadi jika tidak memenuhi ketentuan ini.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Konveyor dari perusahaan MFP dijual, berikut beberapa detail teknis: Sabuk konveyor telah dipasang baru dengan sertifikasi FDA, pelindung samping terbuat dari lembaran baja tahan karat (VA). Seluruh bagian dalam dilengkapi dengan palang, sehingga sangat cocok untuk bagian-bagian kecil. Tugas: 450 mm Ketinggian konveyor: 2300 mm Lebar efektif: 180 mm Blok: Tinggi 30 mm, setiap 300 mm Lebar total: 340 mm Dapat dipindahkan Dodezlxifepfx Agysck Kecepatan sabuk konstan: 16 m/menit, tetapi dapat dilengkapi dengan penggerak frekuensi variabel (FU) dengan biaya sekitar 480 €.

Kondisi: baru, Tahun pembuatan: 2026, Terdiri dari Pemecah Balok untuk balok besar tipe MHB dan Mesin Penghancur Jerami tipe MHZ 1) Pemecah Balok MHB: Harga spesial mulai dari €24.975 net (waktu produksi sekitar 15 minggu) Cocok untuk balok bulat maupun persegi. Sudah termasuk inverter frekuensi (FU) - berfungsi untuk mengatur kecepatan lantai penggaruk. Balok diletakkan di atas lantai penggaruk, lalu sistem pengumpan ke mesin frais diaktifkan. Gigi-gigi pada mesin frais mencabik jerami dari balok dan melemparkannya ke hopper. Kombinasi antara pemecah balok dan mesin penghancur jerami sangat ideal di sini. Spesifikasi teknis Pemecah Balok: - Kapasitas: 1-2 balok per jam - Hingga maksimal 600 kg per jam (tergantung ukuran saringan di penghancur jerami, daya kW mesin penghancur jerami. Tanpa mesin penghancur jerami, kapasitas pemecah dapat mencapai hingga 900 kg/jam untuk melonggarkan jerami) - Ukuran maksimal balok persegi: 2400x1200x800 mm (p x l x t) - Motor mesin frais: 5,5 kW 380 Volt - Pengumpan lantai penggaruk: 0,75 kW 380 Volt - Dimensi: 3750x1730x2460 mm (p x l x t) - Berat: 400 kg 2) Mesin Penghancur Jerami MHZ 600 - 11/15 kW; siap tersedia Harga spesial mulai dari €6.995 net Tambahan biaya untuk mesin penghancur jerami lebih besar (18,5 kW): + €2.750 net Spesifikasi teknis, MHZ dengan hopper khusus: - Motor: 15 kW 380 Volt motor listrik - Diameter: 600 mm - Pisau pemotong yang diperkeras - Saringan dengan inser dapat diganti - Pilihan ukuran lubang (10, 12, 15), 22, 30, 45 mm - Tersedia dengan sakelar bintang-segitiga, pelindung tegangan lebih, dan kabel 8 m siap plug-in - Saluran keluar 160 mm - Jangkauan tiupan sekitar 12 m - Dimensi sekitar 1600 x 1020 x 1360 mm (p x l x t) - Berat sekitar 240 kg --- Opsi tambahan dengan biaya: - Screw feeder + €970 net - Sikon (penyangga harus dipasang oleh pelanggan, maksimal jarak 10 m) + €2.970 net - Filter sederhana €1.750 net --- Opsi lebih lanjut: - Sistem ekstraksi industri (unit demonstrasi) mulai dari €9.950 net - Dengan rotary valve opsional *membuat material menjadi non-bertekanan + €5.750 net - Kontrol: mulai dari €1.620 net - Perpanjangan pemecah balok khusus 3 m (ukuran lain harus dikalkulasi) + €9.750 net - Mesin cetak briket MPP 180 S; demonstrasi, sedikit digunakan, diameter briket 70 mm - hingga 100 kg/jam mulai dari €39.700 net - Versi mesin lebih besar sesuai permintaan --- Deskripsi: muetek Pemecah Balok dirancang untuk membongkar balok jerami dan hay, baik bulat maupun persegi. Mesin penghancur yang dipasang pada pemecah balok memproses jerami dari semua jenis serealia, hay, jagung, dan miscanthus. Mesin muetek seri MHZ/MHB dikenal karena konstruksinya yang kokoh dan desain yang solid. muetek Pemecah Balok seri MHB dilengkapi konveyor rantai, di mana balok jerami diletakkan menggunakan loader depan. Permukaan penopang dapat diatur sesuai jenis balok. Konveyor rantai menekan balok ke head rotor frais, dengan kecepatan feed yang dapat diatur. Rotor frais dilengkapi beberapa gigi yang merobek balok jerami. Jerami yang terlepas akan dikeluarkan. --- Dodpfx Aeb Nulhjgysck Secara prinsip, mesin-mesin ini dirancang untuk material kering: - Jerami - Hay (rumput kering) --- Penguraian hemp hanya dapat dilakukan dengan pemecah khusus biaya tambahan sekitar €9.720 net (tergantung tipe). Penghancuran hemp tidak memungkinkan dengan mesin penghancur jerami. Persyaratan material input: Kadar air maksimal 12%

Kondisi: seperti baru (mesin pameran), Unit demo dengan 7 jam operasional tersedia segera (dari pabrik Neckartailfingen) Mesin penghancur MRZ 830 Nomor tarif barang: 84659600 Tahun pembuatan: 2023 Bukaan umpan 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 fasa Pisau: dapat diputar berulang kali Penggeser yang dioperasikan secara hidrolik Lubang saringan sesuai pilihan (10 - 40 mm) Berat sekitar 1.600 KG Dimensi (p x l x t) sekitar 2290 x 1420 x 1750 mm Kopling turbo Termasuk sebagai standar: Dcjdpfxev Sqrpj Agyjk - pengaktifan otomatis bintang/segitiga - hidrolik cepat - mati otomatis saat rotor tidak beroperasi - kecepatan putaran 70-90 RPM untuk kapasitas tinggi - kontrol siklus untuk menghindari waktu tidak aktif - kontrol langkah yang meningkatkan kinerja penggeser hidrolik - panduan Pertinax untuk penggeser hidrolik - kaki mesin peredam getaran - Sesuai dengan standar CE Mesin penghancur ini dirancang untuk menghancurkan kayu alami, papan serpihan, dan papan MDF, serta bahan lain setelah diuji dan disetujui oleh produsen. Termasuk: - Menaikkan mesin penghancur setinggi 30 cm (persiapan untuk konveyor) Opsi tambahan untuk mesin penghancur: - Konveyor bengkok + 8.770 € (belum termasuk PPN) Bagian horizontal: 1200 mm Bagian yang menanjak: 2500 mm Sudut: dapat disesuaikan dari 0-60 derajat Tinggi pengeluaran: sekitar 2000 mm + - 100 mm - Magnet di atas konveyor + 6.780 € (belum termasuk PPN) - Kontrol untuk konveyor dan magnet di atas konveyor + 2.750 € (belum termasuk PPN) (Mulai dan berhenti masing-masing disinkronkan dengan mesin penghancur) Persyaratan untuk bahan baku: - Kadar air (atro) harus di bawah 30%, - Logam dan kontaminan mineral seperti pasir, batu, dll. akan menyebabkan peningkatan keausan.

Kondisi: baru, Tahun pembuatan: 2026, en-1 Djdpfx Agsd Hkqhjyeck

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kedua mesin penggulung sudut dari perusahaan MFP dijual. Salah satu mesin dilengkapi dengan sabuk baru dan sertifikat kesesuaian Uni Eropa CeNit 3642A, dan harganya adalah €1300. Spesifikasi: Panjang: 600 mm Panjang sabuk pengangkat: 1000 mm Lebar efektif: 200 mm Kecepatan sabuk: 3 m/menit Dapat dipindahkan. Dsdpjziuppofx Agysck

Kondisi: bekas, Tahun pembuatan: 2019, f6ae73c6-701e-45cb-8d9f-3067ae720874 Dcsdpfx Aozbvhfegyek

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Conveyor sudut dari perusahaan MFP tersedia untuk dijual; Panjang kerja: 400 mm Belt pendaki: 1000 mm Lebar efektif: 250 mm Dedpfxszgwqqe Agyjck Lebar total: 450 mm Tinggi keluaran: 950 mm Kecepatan belt: 4 m/menit Dapat dipindahkan Corong dari baja tahan karat (VA), tinggi 150 mm Cleat: tinggi 30 mm setiap 300 mm Dengan corong dari baja tahan karat (VA)

Kondisi: baru, Tahun pembuatan: 2025, Satu mesin lagi siap dikirim segera! Mesin press briket dengan PLC dan sistem otomatis panjang briket Kapasitas: hingga maksimal 60 kg/jam Briket: 50 mm silindris Motor: 5,5 kW Dimensi: 1.900 x 1.350 x 1.410 mm Berat: sekitar 860 kg Dcjdpfsv Rpxlox Agyok Persyaratan: Material input sebaiknya lebih pendek dari 25 mm panjang serpih Kadar air 6–12% ATRO Mesin cocok untuk operasi diskontinu. Contoh: briketisasi hingga 2,5 jam; 1 jam jeda. dst. Jika mesin harus beroperasi lebih dari 2,5 jam secara kontinu, pendinginan opsional harus dipasang.

Kondisi: baru, Tahun pembuatan: 2026, en-GB Dedpfx Asd Nm Sisgyjck

Kondisi: baru, Tahun pembuatan: 2026, Our best-selling briquetting press – the classic model. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and expertise Dcsdpfx Agjgl Nlmjyok + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras (at additional cost): * Surcharge for fill level sensor for automatic operation: + €995 net * Surcharge for large pre-compaction chamber: + €970 (recommended for very light materials such as straw; machine width increases by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (depending on material): up to 60 kg/h* *Depends on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Cooling option for pressing pliers: no Cooling option for hydraulic oil: yes Fill level monitoring option: yes CE compliant Material requirements: - Moisture content (atro) must be between 6% and 18% - Maximum chip length: 15 mm - Installation temperature: temperate room at a minimum of +5°C - Customer is responsible for preventing hydraulic oil loss - Feeding material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. This is the ideal machine for shredding bulky, lightweight aluminium chips or turnings. Not suitable for processing solid aluminium parts. Dcsdpfx Agegmh H Tjyek Included features: + Optimized cutting geometry + Customized pusher control + Load-dependent, hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 40x40 mm, multiple cutting edges can be rotated Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as required (15 - 40 mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Shredder height increase by 30 cm (preparation for conveyor belt) + €2,990 net - Angled conveyor belt (discharge height approx. 220 cm) + €9,770 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop synchronized with shredder) We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight, and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2026, Production time approx. 4-5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several hundred machines in operation with satisfied customers Dcedpfechqxxex Agyok + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust construction, ensuring consistent briquette quality during continuous operation. The compaction process is performed without the addition of binding agents, relying solely on hydraulic pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard hopper has a volume of approximately 0.5 m³. Hoppers with larger capacities or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on specific customer requirements, MPP NEM single units can be combined to create a complete system. The press’s chip container can be loaded manually, by conveyor belt, via extraction system, or with a tipping skip. For systems designed for fully automated operation, it is advisable to use a lift-tipping device in combination with a crusher. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of each briquette is 40 to 75 mm depending on the model, and the diameter, according to type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing coolant, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length are loaded into the storage hopper. A stirrer at the bottom of the hopper prevents material bridging and feeds material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press block. The main press cylinder then compacts the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves up, and the stable briquette is ejected. Briquette production offers the following advantages: • Reduction of material volume by up to 90% • Emulsion recovery • Cost savings in storage and transportation • Economical disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity: up to approx. 200 kg per hour *heavily dependent on material type. - On the last test with aluminium granulate under 5 mm – approx. 186 kg per hour + the recovered emulsion. - On the last test with aluminium shavings under 18 mm – approx. 120 kg per hour + the recovered emulsion. Technical data: Motor: 7.5 kW (+ 0.55 kW for cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Opt. briquette stroke: 80 mm Pump: 80 litres Storage hopper: approx. 0.5 m³ capacity (expandable)

Kondisi: baru, Tahun pembuatan: 2026, c4a1bb14 Dcodpfschuvrsx Agyok

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Professional machine for plastic shredding Base unit starting from €24,990 net Well-suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wooden pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: Dodpfx Ajd H R Sxjgyjck - Special rotor with embedded knives (reduced power requirement) - Minimal cutting gap between rotor knives and counter knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control system: PLC Cutting chamber opening (top): 600 x 800 mm Parts should be max. approx. 500 x 500 mm* *Height is less critical Hydraulically actuated ram Screen perforation of your choice (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage size reduction process with an additional MVZ granulator (screens 5–15 mm) is recommended. Suction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Additional options at extra cost: - Raise shredder by approx. 25 cm (preparation for conveyor discharge) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet controls + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start/stop for conveyor belt + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metals and mineral impurities such as sand, stones, etc. will cause increased wear. We are happy to arrange a free test using your material at our facility in Neckartailfingen. Alternatively, you can send your material via freight forwarder and we will document the test with photos and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic or extremely hard and heavy plastics, as this will impact system durability. --- Optional next larger machines: Base unit: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Parts should be max. approx. 720 x 700 mm* *Height is less critical from €39,995 net (options according to requirements) Base unit: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Parts should be max. approx. 900 x 700 mm* *Height is less critical from €49,975 net (options according to requirements) Base unit: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Parts should be max. approx. 1,200 x 700 mm* *Height is less critical from €79,975 net (options according to requirements)

Tahun pembuatan: 2026, Kondisi: baru, The offer includes only the neodymium overband magnet, not the conveyor belt underneath. Neodymium magnets are among the strongest magnets in the world, featuring extremely high holding force and far outperforming ferrite magnets. Extremely high separation efficiency, depending on material flow height and input material. Dcodpfedubpujx Agysk Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for a simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet: approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and deflected laterally, exiting the magnetic field region. This overband magnet should be installed approx. 7 - 10 cm above the material flow. *Mounting/suspension to be provided by customer depending on the maximum length of metal pieces. Ideal for separating nails from wood chips. Optionally, can also be used in a suctioned single-shaft shredder. Requirements: *Your belt width or internal usable width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material streams less than 12 mm high, with chip lengths below 25 mm. ----- Optional, at extra cost: Cross and incline conveyor demonstrators from €8,770 net

Kondisi: baru, Tahun pembuatan: 2026, Delivery time: Approx. 4–5 months Your advantages: + Extremely large cutting unit opening; 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW drive power Technical data: Color: grey / blue Feed opening top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40 (selectable) Tools: 37/70 knives Dedpfegbkkrjx Agysck Suction nozzle diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (LxWxH) Weight (approx. kg): 3,500 Optional at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics, for increased output - Preparation for conveyor belt discharge - Conveyor belt - Overbelt magnet HAWK-EYE *For shredding veneer or paper (anything thinner than 3 mm), we recommend a segmented floor. Special option available at additional cost. --- Option: Pusher Extension *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with pusher extension option, the top cutting unit opening is 1300 x 1700 mm, surcharge +14,975.–) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (atro) must be below 20% - Material must be free of metals and mineral impurities. Damage to tools and/or increased wear may result.

Kondisi: baru, Tahun pembuatan: 2026, * Options available at additional cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality even in continuous operation. The pressing process is carried out solely by hydraulic pressure, without any binding agents. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation under existing extraction and filter systems as complete disposal units are also available. MPP NEM machines can be combined into a system based on customer requirements. The chip hopper of the press can be fed manually, via conveyor belt, extraction system, or with a tipping skip. For fully automated operation, the use of a lifting/tipping device in conjunction with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm; the diameter, depending on the type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray, allowing coolants, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approximately 20 mm in length can be loaded into the press's storage hopper. A stirring unit at the bottom of the hopper prevents bridging and moves the material into the pre-compaction chamber. Within this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main pressing cylinder compresses the material against a vertical slide until the preset pressure is reached. The vertical cylinder then lifts, and the compact briquette is ejected. The more homogeneous the input material, the more uniform the briquette length. Briquetting offers the following advantages: •Reduction of volume by up to 90% •Emulsion recovery •Cost savings in storage and transport •Cost-effective disposal •Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to max. 350 kg/h (material dependent; chip length less than 10 mm) Last test with aluminum chips less than 18 mm – approx. 260 kg/h *more details after a free test with your material Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 liters per minute Silo: 1 m³ Djdpfjgfm Ryjx Agyock Silo diameter: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2250 kg Hydraulic precompaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Demonstration machine with approx. 9 operating hours Another unit available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for increased throughput performance Dcedpfx Aob Ny Eyogyok We are happy to offer a free trial with your own material. I invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us by freight, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 15 units, multiple reversible, Optional double knife row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as desired (10-40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% ATRO. Standard features included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta start - Fast hydraulics - Automatic shut-off when rotor is idling - Speed 70–90 rpm for high throughput rates - Cycle control to prevent idle times - Performance-enhancing step control of hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder upgrades available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco rings: + €1,980 net (Recommended for more than 20% hardwood content) - Double knife row + €995 net - Special scraper + €990 net (Recommended for shredding veneer or paper, or materials less than 3 mm thick) - Angled conveyor belt + €8,770 net Angle: adjustable from 0–60 degrees Discharge height: approx. 2,000 mm - Automatic over-belt magnet + €5,980 net Alternatively, fixed magnet block above the conveyor for manual cleaning + €990 net (for minimal metal contamination) - Conveyor and over-belt magnet control + €2,750 net (Start/stop synchronised with shredder), alternatively manual start/stop of belts + €595 net Raw material requirements: - Moisture content (ATRO) must be under 30% - Installation temperature: temperature-controlled area, minimum +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Kondisi: baru, Tahun pembuatan: 2025, Ideal for shredding straw, polystyrene foam (EPS), leaves, hay, and bread. Throughput is highly dependent on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen Dcedozbizopfx Agyok - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW, 400 Volt (alternatively 9.2 kW or 15 kW available upon request) Optional: *Surcharge for next largest machine with 18.5 kW and larger silo diameter: + €2,750 net Robust steel construction Hardened cutting blades Screen with interchangeable inserts Available perforations: 10, 15, 22, 26, 30, 40, or 60 mm When equipped with electric drive: star-delta switch, overload protection, and 8 m ready-to-plug power cable Blow-out nozzle, 150 mm diameter Suitable for plastic or grain pipes Blowing distance approx. 12 m Chassis with 2 running wheels Ø 380 mm and a swiveling support wheel Ø 125 mm All wheels with solid rubber tires Dimensions approx. 1200 x 900 x 1270/1400 mm (LxWxH) Weight approx. 240 kg Spare part prices and options: 24 hardened blades, €9.90 each net 6 bolts, €14.90 each net 1 screen, €475 net Lid, €290 each net Polystyrene disk, €600 each net

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to max. 10 pallets per hour *Performance depends on screen and material. Considerably higher throughput for smaller wood residues. Motor: 22 kW; 400 V – 50 Hz – 3 phases Screen: 15/20 mm or as agreed (options from 10 to 40 mm available) Hydraulically operated ram Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: actual unit color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta starter - High-speed hydraulics - Automatic switch-off when rotor idles - Speed 70-90 rpm for high throughput - Cyclic feed control to prevent idle times - Step logic for increased hydraulic ram performance - Pertinax guides for the hydraulic ram - Vibration-dampening machine feet - CE compliant Dsdpsx Af Rdsfx Agyock The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor preparation) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (starts/stops synchronously with the shredder) - Flared feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material must be free from metals and mineral contaminants. Tool damage and/or increased wear may otherwise occur.