Pelat pelurus dan pengelasan logam tuang baja dan besi tuang abu-abu, sangat bergaris, bekas pelat p

1000x800

Kondisi: siap digunakan (bekas), lebar total: 2.011 mm, en-nl-1 Duodpfx Aoxl Hxueftjp

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Djdpfxofxyhfs Aftoup Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: siap digunakan (bekas), daya nominal (semu): 45 kVA, produsen pengendali: Fanuc Series 18i-MB, panjang total: 11.000 mm, lebar total: 6.000 mm, berat kosong: 24.000 kg, Type: MCH-800 Spindelende zu Tischmitte: 300 – 1300 mm Spindelmitte zu Tischoberfläche: 50 – 1050 mm Maximale Werkstückabmessungen: 1400 x 1200 mm Kühlung durch die Spindel X-Achse: 1350 mm Y-Achse: 1000 mm Z-Achse: 1000 mm Tischabmessungen: (5x) 800 x 800 mm (endlose Teilung) Maximale Tischbelastung: 2 t Djdpov Sfqgjfx Aftoup Aufnahme in der Spindel (ISO): ISO-50 Spindelleistung: 18,5 kW Werkzeugmagazin: vorhanden Werkzeuge: 90 Plätze Drehzahl: 1 – 6.000 U/min (optional!)

Kondisi: siap digunakan (bekas), en Dusdoxl Hxnopfx Aftsp

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas),

Kondisi: bekas, Straightening and Welding Plate SIEGFRIED WEYRAUCH Gemmingen Steel cast/grey cast iron, heavily ribbed Former marking-out and measuring plate Heavy-duty straightening plate Length: 1000 mm Width: 800 mm Thickness: 28/125 mm Working height: approx. 850 mm - Feet with adjustment screws for leveling the plate Dedpfxsd N H Dbj Aftsup Weight: 370 kg Good surface condition

Kondisi: bekas, Length: 1000 mm Width: 800 mm Height: 630 mm Weight: 460 kg T-slot width: 50 mm Duedpfxegrngdo Aftsp Clamping table, clamping plate, T-slot table Dimensions Table length: 1000 mm Table width: 800 mm Table height: 630 mm T-slot width: 50 mm Weight: 460 kg

Kondisi: bekas, Tahun pembuatan: 1981, nomor mesin/kendaraan: 5171754, Pile Hoist / Pallet Lifter - Stack Lift Polar Mohr HL 600 Dusdpfeh Ax T Tjx Aftep Year: 1981 - Serial No. 5171754 Maximum format / size: 1100 x 800 mm Maximum loading capacity: 600 kg Maximum lifting height: 1000 mm Equipped with a light barrier for automatic lifting of cutting material (paper). Online video inspection possible via Skype video. We would be pleased to welcome your visit – more machines available in stock. Available immediately – inspection possible Located in Emskirchen / Nuremberg – machine can be tested on site.

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), Operating pressure: 6 bar, connected load: 26.92 kW, weight: 400 kg, supplied with documentation. Dusdpfx Afslvu Ruotjp

Kondisi: bekas, Technical details: Duedpfx Aeu N Dwdjftep Length: 640 mm Width: 800 mm Height: 1000 mm Depth: Depth/Length: 640 mm Approx. machine weight: 570 kg Clamping surface is roughly machined Good used condition, minor traces of use (without clamping elements) T-slots according to DIN 650: a = 28 mm; b = 49 mm; c = 21 mm; h = 50 mm T-slot spacing: T-slot = 160 mm

Kondisi: baru, de Dedon E N E Ejpfx Afteup

Kondisi: bekas, Infeed cross-section: 800 x 1000 mm Drive: 18.5 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 rpm Rotor design: cutting plates on tool holders Screen design: heavy-duty screen basket, reinforced with ribs Duedpfx Afecayzqotjp Extraction nozzle: lateral Machine weight: approx. 1,950 kg Machine number: A 33

Tahun pembuatan: 2020, Kondisi: baru, nomor mesin/kendaraan: DMTT1000x800mm, With our protective screens made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of safety for both parties! Protect yourself and others from infections! These infection control panels provide employees and customers with increased safety in mutual interaction without impairing communication. Product features External dimensions: 1064 mm x 867 mm Internal dimensions: 974 mm x 775 mm Dujdpfxjfiwf Es Aftop

Tahun pembuatan: 1984, Kondisi: bekas, Max. Schleifdurchmesser: 40 mm Duedpfx Afjcq Rv Uetjp Min. Schleifdurchmesser: 5 mm Gewicht: 0,9 t Lieferumfang: - 2 Schleifscheiben mit Flansch - 8 Spannzangen - 1 Kühlmittelbehälter - Mechanischer Vorschub mit Festanschlag Hinweis: Die Gelenkwelle für den Werkstückantrieb ist ausgeschlagen.

Kondisi: bekas, Gußeiserner Spannwürfel, 2 Spannflächen Dodow Aavkspfx Aftjup Länge: 1000 mm Höhe: 600 mm Tiefe: 800 mm T-Nutenmaße: 38 x 22 mm Gewicht: ca. 600 kg