Mesin penghancur UNTHA LR630 - bekas -

LR630

Kondisi: bekas, Tahun pembuatan: 2015, Daya penggerak: 18,5 kW Ukuran lubang saringan: 20 mm Diameter rotor: 248 mm Kecepatan rotor: 98 rpm Jumlah alat pemotong: 17 unit Bukaan pengisian: 624 x 792 mm Diameter konektor hisap: 160 mm Berat: sekitar 1300 kg Dimensi: 1740 x 1220 x 1670 mm Iiodpfey A Nfzjx Afisa Lokasi penyimpanan: Pemasok

Kondisi: baru, Tahun pembuatan: 2026, drum chipper ATH 300 series S&F chipping machines and drum chippers with horizontal feed are used in numerous sectors of the wood processing industry (sawmills, woodworks). Chippers from the "ATH" series produce high-quality, homogeneous wood chips from residual wood with a low proportion of fines, for example as quality wood chips for the pulp industry or as fuel chips for energy generation. ATH 300 Series - Infeed height: 300 mm - Infeed width: 500 | 700 | 1000 mm - Number of chipping knives: 2 - 6 pcs. - Number of counter-knives: 2 pcs. - Rotor diameter: 700 mm - Number of infeed rollers: 3 pcs. - Throughput capacity: up to approx. 70 stacked cubic meters/hour * - Chip length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Infeed roller drive power: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chip length, kW main motor, number of knives, and feed system Advantages: - Maximum throughput - Low proportion of fines - Low maintenance - Flexible application - Custom manufacturing Iiedpfx Afjuz Hmxjiea Need more information? Contact us! We are happy to advise you. Drum chipper | Wood chipper | Chipper | Chipping machine | Wood chipping machine | Shredder | Wood size reducer

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 340 h, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), Motor 18,5 kW Diameter rotor sekitar 248 mm Kecepatan rotor sekitar 98 rpm Motor 18,5 kW Diameter rotor sekitar 248 mm Kecepatan rotor sekitar 98 rpm Bukaan pengisian sekitar 624 x 792 mm Berat sekitar 1.300 kg P x L x T sekitar 1.750 x 1.230 x 1.680 mm dengan lantai dorong hidrolik sekitar 750 jam operasi Iijdpfxoy Div Ao Afija Data diambil dari brosur, tanpa jaminan Data teknis lebih lanjut tersedia atas permintaan

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 10.120 h, panjang total: 1.800 mm, tinggi total: 1.700 mm, lebar total: 1.200 mm, de-hu-001 Isdjwh Na Njpfx Afieia

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Gergaji BIESSE Selco WN2 bekas Iisdpfx Afsyrr U Noioa - Kontrol OSI - Printer label - Tahun 2017 - Tersedia April - Tinggi potong 60mm - Kecepatan 1-80 m/menit - Ganti mata gergaji cepat - 4 meja bantalan udara

Kondisi: baik (bekas), Putaran lambat dengan lantai dorong Tahun produksi: 2007 Iodpsykkwajfx Afieia Lebar rotor: 630 mm Motor 15 kW Hanya sekitar 750 jam operasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jumlah sumbu: 3, This 3-axis vertical honing machine GEHRING 630-1 LR was manufactured in 2017. It is equipped with a HAINBUCH quill with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction sleeves. The machine is ideal for precision honing applications. Please contact us for further information regarding this machine. Additional equipment: • HAINBUCH hexagonal clamping sleeve, Ø65 mm – Quantity 1 • HAINBUCH alignment screwdriver – 3 pieces Iijdsyap Uiepfx Afioa • HAINBUCH drawbar adapter – Quantity 1 • Cable (unspecified) – Quantity 2 • Clamping tool (unspecified) – Quantity 1 • Internal coolant collector – Quantity 1 • Hydraulic tool holder VDI40, Ø20 (ISCAR) – Quantity 8 • MAPAL holder D12, Ø13, part no. (unspecified) – Quantity 4 • Reducing sleeve for hydraulic holder, 20→13 mm – Quantity 6 • MAPAL carbide reamer plate "Axel 92-R-0N" – Quantity 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) – Quantity 1 • Hydraulic holder for reduction sleeve ISCAR 20→14 – Quantity 3 • Chisel/tool holder DIN 69880 - E2 - 40×40 – Quantity 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) – Quantity 4

Kondisi: bekas, Tahun pembuatan: 2007, Working width 1380 mm Workpiece height 70 mm Total power requirement 45 kW Machine weight approx. 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding unit Type EM 5 N/II/L + 2 B/1400 Year of manufacture 2007 Serial no. 780063 _____ Grinding width approx. 1,380 mm Roller width 1,400 mm Max. workpiece height 1 - 70 mm Iodpst Hw Iisfx Afisia Continuously adjustable feed speed approx. 1.5 - 8 m/min Comprising 5 working units: Oscillating sanding roller for use with abrasive cloth (abrasive fleece) Ø 450 mm, 1,400 mm wide x 1,540 long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts Ø 350 mm, drive 2 x 5.5 kW, abrasive flap wheels or non-woven abrasive, adjustable for wear. Brush roller unit to accommodate 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via hand wheel, also ideal for removing oxide layers. Wet grinding unit with belt filter and closed water circuit, installed under the transport belt and easily extendable from the machine. Washing and drying device, designed for a minimum workpiece length of 80 mm, water and air supply adjustable, etc. Workpiece transport is front-sided via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system over a width of 300 mm on the right as well as a magnetic belt with a width of 300 mm, for holding small parts down to a minimum length of 80 mm. Frequency inverter for stepless speed adjustment of the abrasive flap brushes from 250 – 1,000 rpm (position 2 top), as well as for the conveyor feed. Control panel with clear controls and digital readout of roller adjustment, 4 ammeters for monitoring roller drives, control LEDs. Quick-change facility for lateral removal of abrasive flap brushes, as well as various spare rollers with abrasive fleece and brush fittings. Total drive approx. 45 kW – 400 V – 50 Hz Weight approx. 5,500 kg Condition: good to very good Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: baru, Tahun pembuatan: 2026, Engine power 18.5 kW Rotor diameter 248 mm Number of blades 17 pcs Ijdpfxenzh T To Afisia Reversible cutting inserts Feed opening 624 x 792 mm Extraction nozzle 160 mm, can be positioned left or right Weight approx. 1,300 kg Perforated screen 15/20 mm External dimensions approx. 1740 x 1220 x 1670 mm (LxWxH)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SH12005, Untha LR 630 Shredder Operating Hours: 1 h Demonstration Machine Machine No.: SH12005, Year: 2024 Article Number: JA_G250303 Description Feed Opening: 624 x 792 mm Hopper Volume: 0.43 m³ Rotor Diameter: 248 mm Iijdev Tbqljpfx Afioa Rotational Speed: 98 rpm Power Supply: 400V/50 Hz, 18.5 kW Knives: 17 pieces Screen Hole Size: 15-20 mm Suction Connection: 160 mm Weight approx.: 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Cable Harness: 3 m + Connection for screw discharge Errors and technical specification changes excepted. Note – New Machine: • Prices are ex-works (unless otherwise stated) from our site in Ottendorf-Okrilla/Germany – free loaded! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice including VAT. • Buyers may inspect the items on site. • Our general terms and conditions apply. • Special arrangements are only valid if confirmed in writing. • Items visible in the background of images are not included in delivery. • Saw blades are for illustration purposes only and not included in delivery. Shipping Options: • We are happy to provide you with a shipping quote. • Collection from Ottendorf-Okrilla by arrangement is free of charge. (Setup and operational briefing for demonstration purposes is optionally available by prior arrangement!) • Optionally, our trained service personnel can install the machine at your site and provide a brief introduction. Travel, transport, and service times at extra cost.

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Ijdpfx Afeu Nlkxoieia