Vertical Carousel

LTG-TOWERMAX P 7.2-250-29-215-4730

Kondisi: baru, Tahun pembuatan: 2024, jam operasional: 50 h, nomor mesin/kendaraan: 305, Available: February 2023 Control system: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with crosswise T-slots every 250 mm Max. load: 1,000 kg distributed over the entire surface 2-Axis Milling Head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool holder: HSK 63F Tool release: pneumatic Blow air / MQL: external Linear Axis Drives Feed rate X and Y-axis: up to 50 m/min Dodpowwq Hcsfx Aavjkw Feed rate Z-axis: up to 30 m/min Color Enclosure, gantry, control cabinet: light gray Z-slide and milling head: orange Additional Equipment - 15-position tool changer - Control unit in separate, mobile console

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled Dkodpfx Ajuhauyoavew - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: baru, Tahun pembuatan: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1500 mm Drive system: Omron servo drives with EtherCat protocol, X, Y axes with hardened and ground helical racks, accuracy class 6; Z axis with ball screw, accuracy class 5 Linear bearings: Bosch Rexroth 35 Traverse speed: X, Y up to 45 m/min; C, A up to 6000 degrees/min Software resolution: 0.0005 mm Positioning accuracy: 0.01 mm Gantry drive: dual-sided master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW Electrospindle inverter: yes Max electrospindle speed: 24,000 rpm (optionally 6,000, 40,000, 50,000) Construction: welded, ribbed, stress-relieved steel frame, precision machined Table type: vacuum, hybrid, steel, aluminum with M16 or M18 threaded holes #plotter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #plywood #chipboard #steel #aluminium #aluminum Dodpjn Nv H Sefx Aavskw #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Kondisi: sangat baik (bekas), CHIRON DZ 18.2 KW, Year of manufacture: 2012 Control: Fanuc 31i Travel (X / Y / Z): 630 x 520 x 400 mm Pallet changer: 2x 940 x 470 mm 2 spindles Dksdpfxouviiws Aavew Spindle distance: 320 mm 2×32-position tool changers Tool holder: SK40 Max. spindle speed: 10,000 rpm

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, jarak pergerakan sumbu X: 1.400 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 610 mm, berat benda kerja (maks.): 1.400 kg, tinggi total: 2.492 mm, panjang total: 4.367 mm, lebar total: 3.070 mm, panjang meja: 1.500 mm, lebar meja: 650 mm, daya motor spindle: 11 W, pergerakan cepat sumbu Z: 24 m/menit, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, hidung spindel: Iso 40, kecepatan spindel (maks.): 8.000 rpm, kecepatan spindel (min.): 40 rpm, diameter alat: 75 mm, panjang alat: 250 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, NEW Vertical Machining Center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Dsdpferg Htpex Aavekw Included accessories: - Prepared for rotary table - External air blast at spindle - Left-sided auger chip conveyor - Automatic high-pressure coolant system through spindle at 20 bar - Wash-down gun - Guard base wash system - 390-liter coolant collecting tank - 3-color end-of-cycle signal light - Full auto power-off

Kondisi: sangat baik (bekas), Mesin las titik dengan silinder stroke tunggal dan pemegang elektroda flensa atas dan bawah Merek: DALEX Tipe: PMS 14-3 Jarak pengelasan: 350 mm Dkedpfxotuwz Ij Aavjw Daya nominal pada 50% ED: 80 kVA Arus hubung singkat sekunder: 54,5 kA Tegangan tanpa beban sekunder: 7-14 V Gaya elektroda: 80-1.200 daN dilengkapi dengan: Sakelar 8 langkah Sakelar utama Lemari kontrol tambahan HARMS+WENDE Kontrol pengelasan sinkron MPS 200 8 program pengelasan Plat tipe AEG Mulai dengan pedal kaki

Kondisi: sangat baik (bekas), Motor-driven rotary sliding table Stepless rotary table (indexing 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping area: 1600 mm x 1600 mm Dedpfxsif Rlbo Aavokw Longitudinal travel, W-axis: 1000 mm Condition: Very good (used)

Kondisi: bekas, Tahun pembuatan: 2002, Max. turning diameter: 420 mm Turning length: 1,250 mm CNC Control: INDEX, C 200-4 D Swing diameter: 630 mm Travel X1: 320 mm Travel Z1: 1,250 mm Travel X2: 170 mm Travel Z2: 1,250 mm Travel X3: 320 mm Travel Z3: 1,250 mm Dkedpet U R Hzefx Aavew Max. main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle - max. spindle speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle - spindle bore: 102 mm Counter spindle - spindle nose: DIN 55026 size 11 Counter spindle - torque: 675 Nm Counter spindle travel: 1,250 mm Feed force X1: 14,000 N / Z1: 14,000 N Rapid traverse X1: 20 m/min / Z1: 40 m/min Feed force X2: 8,600 N / Z2: 14,000 N Rapid traverse X2: 20 m/min / Z2: 40 m/min Feed force X3: 14,000 N / Z3: 14,000 N Rapid traverse X3: 20 m/min / Z3: 40 m/min Number of turret positions, Turret 1 = 12 Number of turret positions, Turret 2 = 10 Number of turret positions, Turret 3 = 12 Number of driven tool stations: 12 / 10 / 12 Max. driven tool speed: 6,000 rpm Torque (driven tools): 36 / 21 / 36 Nm Tool shank DIN 69880 Tool holder Ø 40 x 63 mm Total connected load: 120 kW Machine weight approx.: 19 t Machine dimensions (L x W x H): 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on main spindle - HAINBUCH collet chuck, SPANNTOP SP on counter spindle - Various tool holders (including for driven tools) - Chip conveyor - Coolant system Note: All three tool turrets are prepared for through-tool coolant (IKZ), however, the high-pressure system is not included with the machine.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 150 mm, panjang sabuk penggiling: 7.000 mm, jenis penyesuaian ketinggian: listrik, tinggi total: 2.200 mm, panjang total: 3.550 mm, lebar total: 2.000 mm, berat keseluruhan: 870 kg, panjang penggilingan: 1.500 mm, berat benda kerja (maks.): 80 kg, diameter sambungan ekstraksi: 180 mm, lebar penggilingan: 950 mm, kecepatan rotasi (maks.): 1.435 rpm, kebutuhan tinggi: 2.200 mm, persyaratan ruang panjang: 3.550 mm, lebar yang dibutuhkan: 2.000 mm, penyesuaian ketinggian meja: 500 mm, Perlengkapan: dokumentasi / manual, Wide Belt Sander MS92-150 – 3-Roller Deflection, Belt Size 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Dksdpfxotwb U Ao Aavjw Scope of delivery includes: - Machine base with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electrically operated table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE-compliant design The rigid machine frame, constructed of welded steel, ensures extremely smooth operation. Both machine bases are designed with an offset to enable grinding of workpieces longer than the machine table itself. The grinding belt is guided by three deflection rollers, providing the operator with an exceptionally open and accessible workspace, ideal especially for use with hand sanding blocks. The belt drive is powered by a three-phase motor with a dynamically balanced drive roller. Belt tension is pneumatically adjustable. The dust collection device is dimensioned to efficiently capture grinding dust and direct it to the extraction port when connected to a suitable extraction system. To allow for fatigue-free operation, the grinding unit runs in play-free, precise roller guides. The machine table can be quickly and easily adjusted to the appropriate workpiece height via the electrical table lift. The table lift guide components are maintenance-free. For loading, the table can be extended sufficiently so that workpieces can be placed without the need to slide them under the grinding belt. All main electrical controls are centrally located for user-friendly operation. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small enclosures in “light grey” The standard machine is supplied with an initial equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling system for rotating and tilting workpieces. The handling system is mounted centrally beneath the infeed frame. To operate the handling system, the infeed frame is removed from the machine table. The handling system is equipped with four vacuum suction cups to hold workpieces and consists of: A bearing with a rotation axis featuring a brake disc at the rear. At the front of the rotation axis, a tilting device is mounted, which can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional indexing disc on the tilting head allows for fine adjustment of the workpiece to the sanding belt. The release of the rotation and tilt axes is pneumatically controlled by foot switch, while manual movement of the axes is required. Maximum permissible workpiece weight: as flat table with infeed frame = 80 daN; when using the handling device (on the clamping plate) = 25 daN or 120 Nm (relative to axis center).

Kondisi: siap digunakan (bekas), Saw blade diameter: 300 mm Cutting capacity at 90° (round): 100 mm Dkedpfx Aol Ra Uijavow Cutting capacity at 90° (rectangular): 90 x 90 mm Mitre cutting capacity at 45° (rectangular): approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirement: 850 x 600 x 1600 mm