Menara penegang

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 900 mm, rentang pengukuran sumbu Y: 1.200 mm, rentang pengukuran sumbu Z: 700 mm, Zeiss CNC coordinate measuring machine Prismo VAST GOLD with rotary table Year of manufacture: 1999 Retrofit: 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Machine features, equipment: Control system C98 with BP26_SE control panel VAST GOLD sensor 13-slot probe changer magazine Probe change tray Probe accessories Kedpfx Aajvdtzdshsnf Calibration sphere Reference probe Workstation with monitor Software: Calypso Basic 5.2 Upgrade to the latest Calypso version and further options possible Complete retrofit with C99 and latest Calypso possible Available at short notice

Kondisi: bekas, Tahun pembuatan: 2001, Technical specifications: Tool holder: SK 40 Travel paths: X-axis: 530 mm Kjdot Hr Ahjpfx Aahenf Y-axis: 450 mm Z-axis: 450 mm Max. tool weight: 260 kg Spindle speed: 12,000 rpm Max. table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Tahun pembuatan: 1993, Kondisi: siap digunakan (bekas), Vertical Turning Center Dörries Scharmann Model VCE 2000/160 Pallet Size: 1,600 mm Pallet Load Capacity: max. 8,000 kg Number of Pallets: 13 units Table Indexing: C-Axis 0.001° Table Cross Travel (X): 2,300 mm Column Longitudinal Travel (Z): 1,500 mm Crossbeam Positions: 9 steps of 100 mm each Feed Rate X/Y/Z: 1 – 6,000 mm/min Rapid Traverse X/Y/Z: 8 m/min Kodpfxeguk S Ss Aahjnf Max. Swing Diameter: 2,000 mm Max. Workpiece Height: 1,500 mm Main Spindle Spindle Drive Motor: 69 kW Spindle Speed: 2.8 – 315 rpm Automatic Tool Changer for Turning: 59 positions – System 240.2 Live Spindle – SK50 Spindle Drive Motor: 30 kW Spindle Speed: 10 – 1,500 rpm Automatic Tool Changer for SK50: 61 positions CNC Controller: Siemens Sinumerik 880M Accessories FMS (Flexible Manufacturing System): 13 pallets Rotary Loading Stations: 2 units Coolant Unit with Filtration System Through-Spindle Coolant Supply Machine Weight: Approx. 40 tons Year of Manufacture: 1993 (See also other listings from this seller)

Kondisi: baru, IMMEDIATELY AVAILABLE FROM STOCK!! Subject to prior sale. The OD pipe deburring machines remove burrs from pipes after cutting. This machine simultaneously removes internal and external burrs from pipes and profiles without requiring rotation of the pipe material. Round, square, rectangular, and various other pipe and profile shapes can be deburred within just a few seconds. Thanks to the rotation of the brush, the operator does not need to rotate the pipe. The pipe clamping system allows for precise insertion of the pipes and makes it easier for the operator to hold them during the deburring process. The removed burrs are collected in a plastic container. Knodped Ixbzjfx Aahsf

Tahun pembuatan: 2001, Kondisi: bekas, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Knjdpfx Aaodwf Dbehjf

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and Knsdpfx Ast Hagnoahef screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Kondisi: baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 550 mm, CNC control Heidenhain TNC620 Kodpfetqd E Ejx Aahjnf 4th axis (NC rotary table) electronic handwheel 24-position tool changer internal coolant supply (IKZ) chip conveyor extraction unit Technical data: X-travel: 1000 mm Y-travel: 550 mm Z-travel: 550 mm Spindle taper: SK40 Spindle speed range: 10,000 rpm Table clamping area: 1000 x 600 mm Number of tool magazine positions: 24 Spindle drive capacity 40% duty cycle: 13.5 kW Weight approx.: 6,000 kg Technical data, accessories and machine description are subject to change and not binding.

Tahun pembuatan: 1990, Kondisi: baik (bekas), CNC 4th axis Make: NIKKEN Type: CNC-200, Year: 1990 with tailstock and base plate. Ksdpfsgabu Uex Aahonf

Kondisi: baru, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with its advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package. Ksdpofg E Hwefx Aahjnf • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Inch mode for positioning • Bundle clamping electrically and hydraulically pre-installed • Chip conveyor The SNC 20 control system enables convenient and uncomplicated input of up to 20 different sawing jobs (length and quantity). Once the desired dimension is entered, the control system automatically calculates the kerf and the number of feed cycles. Additionally, the error code display system enables rapid fault analysis and troubleshooting.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2008, CNC Vertikal - Bearbeitungszentrum HERMLE C 30 U Knodpfxsx Hg Ubs Aahef