Logam Gringing & tepi pembulatan mesin

NS Maquinas OD120 + OD160

Kondisi: baru, Airtower FT 20,000 model designation Nodpfsgvqzcex Adnscn

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Ncedpfx Adjd Ev Upjnen Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Kondisi: bekas, Contact grinding wheel dimensions: 50 x 100 Ø mm Nodpfsb Tcv Hsx Adnecn Drive motor: 380 V, 0.7 kW Required space: 650 x 550 x 1050 mm

Kondisi: bekas, Tahun pembuatan: 2007, Swing diameter 300 mm Max. turning diameter over bed 430 mm Ncjdswx R Rkepfx Adnjn Max. turning diameter over cross-slide 300 mm Control system SIEMENS, SINUMERIK 840 D Travel - X axis 160 mm Travel - Z axis 510 mm Maximum workpiece length 480 mm Main spindle bore 53 mm Main spindle speed 0 - 7,000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Main spindle motor 15 kW Counter spindle bore 53 mm Counter spindle speed 0 - 7,000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Counter spindle motor 15 kW C-axis resolution 0.001° C-axis rapid traverse 1,000 rpm Tool turret 1 x 12 stations Number of driven tool stations 12 Tool holder cylindrical shank (DIN 69880) VDI 25 Driven tool speed 0 - 8,000 rpm Torque 16 Nm Power 4 kW Feed force X/Z axis 4,000 / 6,000 N Rapid traverse X-axis 24 m/min Rapid traverse Z-axis 30 m/min Total power requirement 38 kVA Machine weight approx. 4 t Machine dimensions (L x W x H) 2.65 x 1.84 x 2.32 m Accessories: Collet chuck 173 E on main spindle, Collet chuck 163 E on counter spindle, Bar feeder by FMB, type turbo 3-36/3200 A, Year 2018, for bar diameters up to 36 mm and lengths up to 3,200 mm; Various tool holders for the turret (none driven), Coolant system

Kondisi: baik (bekas), The debarker is perfectly suited for processing both hardwood and softwood logs. - Trolley made of heavy-duty steel construction - 5 pairs of drive wheels - Milling arm constructed from heavy-duty steel Nodpjtuyr Ijfx Adnocn - Hydraulic milling head - 22 kW motor Please note: The log feeder visible in the photo is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR.

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm Ncodpfx Ajlgvkiednen - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: baru, en-GB: GRATMAXX Deburring Brush Machine The machine is suitable for deburring cut edges on: Round tubes, square tubes, rectangular tubes, solid bars, and all types of profiles. Materials: Hard or mild steel, non-ferrous metals, plastics. Process: After setting up the workpiece support and the lateral stops, the burred workpiece is simply held against the brush, which rotates around its own axis. The workpiece itself is not rotated – this motion is performed by the brush. The material of the workpiece, burr thickness, and desired edge rounding determine the contact pressure and duration, typically around 1-5 seconds. Technical specifications: Material: Steel, stainless steel, and non-ferrous metals (motor speeds 700–1,900 rpm, steplessly adjustable) Min. workpiece diameter: 5 mm Max. workpiece diameter: 100 mm (150 mm) Njdpfxjd Hmnfj Adnocn Brush dimensions: 2 pieces Ø 300 (250) x 50 mm or 3 pieces Ø 300 (250) x 35 mm Drive power: 3.0 kW Power consumption: 3.5 kW Operating voltage: 3~, 400 Volt, 50 Hz Rated current: 8A Fuse: max. 16A Control voltage: 24V DC Width: approx. 500 mm + handwheel 74 mm + extraction nozzle 130 mm Height: approx. 1,382 mm Working height: approx. 1,080 mm Depth: 1,209 mm Weight: approx. 310 kg Sound pressure level: at 700 rpm 64 dB(A), at 1,500 rpm 74 dB(A), when processing a workpiece at max speed 82 dB(A) Scope of delivery: - Rotational head deburring brush machine GratMaxx with power socket (without cable) - Workpiece support table with adjustable angle stop and workpiece stops - Tool for brush replacement - Brushes not included in the scope of delivery! Accessories: F50201 Wire brush, twisted wire 0.38 mm F50202 Wire brush, steel wire 0.2 mm F50203 Wire brush, steel wire 0.38 mm F50204 Wire brush, stainless twisted wire 0.38 mm F50205 Abrasive nylon brush U180 F50206 Abrasive nylon brush U120 F50207 Wire brush, stainless wire 0.20 mm For further technical data, please refer to the attached PDF document.

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Ncjdpfx Ajra Rr Esdnsn Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirement approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for series cutting from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle. CNC automatic machine with multiprocessor control and two axes controlled by the latest generation MEP control system, enabling the programming of up to 1000 different cutting programs, each with different cutting lengths and quantities, for the same material thickness. Ncjdpfx Adefg Rlcenjn

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2013, 1 Ncjdpjfyiqbefx Adnon