MESIN PEMOTONG BANGKU MANUAL

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 516220V00284, Tahun pembuatan: 2019, jam operasional: 7.836 h, kapasitas angkut: 1.600 kg, tinggi angkat: 3.180 mm, pengangkatan bebas: 150 mm, Perlengkapan: geser samping, TECHNICAL DETAILS Load capacity: 1,600 kg Load centre: 500 mm Load distance: 374 mm Kedpjyiawdsfx Ac Heln Wheelbase: 1,319 mm Lift height: 3,180 mm Free lift: 150 mm Length incl. fork back: 1,861 mm Fork thickness: 40 mm Fork width: 80 mm Fork length: 800 mm Fork carriage width: 980 mm Axle load with load front/rear: 4,160 / 565 kg Axle load without load front/rear: 1,500 / 1,625 kg Ground clearance with load under mast: 290 mm Ground clearance at wheelbase centre: 114 mm Aisle width with pallet 1,000 x 1,200 crosswise: 3,186 mm Aisle width with pallet 800 x 1,200 lengthwise: 3,311 mm Turning radius: 1,487 mm Minimum pivot point distance: 1,487 mm Mast height retracted: 2,160 mm Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2,661 x 1,099 x 2,160 mm Own weight incl. battery: 3,125 kg Mast height extended: 3,742 mm Height over overhead guard: 2,035 mm Seat height: 1,058 mm Coupling height: 473 mm Voltage: 48 V Capacity: 625 Ah Operating hours: approx. 7,836 h EQUIPMENT Charger Attachment: Sideshift Seat with seat heating Blue Spot front and rear LED headlights: 2x front, 1x rear Windscreen with wiper Panorama roof Digital display Interior mirror Operating manual Note: The upholstery is worn.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1630, berat keseluruhan: 7.800 kg, masa garansi: 6 bulan, daya: 85 kW (115,57 hp), Complete production line for sale based on Di Più BRIK MB100 briquetting press (complete production line). General overhauled machine DI PIU BRIK MB100 (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. The unit was recently overhauled at the Di Piu factory, where all vital parts, cables, wiring, and necessary electrical components were replaced. As a result, the machine is as good as new and comes with a 6-month factory warranty from Di Piu. The machine can produce briquettes with or without a hole, 90mm to 110mm in diameter, from softwood or hardwood, round or square. Inspection is possible at the Di Più factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust, and other waste materials into wood briquettes. Ideal input material moisture content: 8% – 12%, particle size: 1 mm – 12 mm. Technical data: Ksdpswrp Emofx Ac Heln -Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) -Briquette diameter: 90 – 110 mm -Main motor power: 75 kW -Total installed power: 98 kW -Piston compression pressure: 2,000 – 2,500 kg/cm² -Vertical auger with gear unit: 5.5 kW -Oil pump: 1.5 kW -Oil pump for closing extrusion head: 1.5 kW -Feeder with auger and adjustable speed: 1.5 kW -Oil lubrication system for bronze bearings: 100 liters -Briquette output monitoring sensor (automatic shutdown if the material runs out) -Safety covers for moving parts -Oil pressure sensor -Control cabinet -Buffer hopper for input material (accumulator) -Level sensor for feed system monitoring -Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for full operation and integration into a briquetting line: ADDITIONAL EQUIPMENT – MB100: - Dosing silo: Heavy-duty steel construction. Diameter: 1,500 mm, height: 1,000 mm. Equipped with rotary cutter with 2.2 kW geared motor, mounted on robust steel frame. Material feeding controlled by level sensor. - Post-extrusion briquette cooling line, total length 20 meters - Automatic briquette saw - The saw automatically cuts the briquettes to lengths preset by the operator. - Device for producing briquettes with a hole - Head-cooling system with ice water - The system produces 50 liters/minute of ice water for efficient briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and large energy storage tank holding the immersed water-coolant heat exchanger. - The heat exchanger is a high-efficiency “fin-pack” type, made from copper pipes and aluminum fins. - Water tank capacity: 800 liters - Water supply pump (50 l/min – 20 mWc – 0.55 kW) with three-way DN25 valves for adjusting coolant temperature in the briquetting head. - Digital electronic temperature controller with NTC sensor (probe d.6 × 52 mm, IP68, AISI 316). ADDITIONAL: NOVAPAC Wrapper Option to purchase a NOVAPAC wrapper, fully compatible with Di Più BRIK MB100 and other machines, an ideal solution for automatic packaging immediately after compression. Year: 2013 Price for Novapac: €19,000 Equipment shown in the last 6 images.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 113253, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 14.000 kg, panjang meja: 4.500 mm, lebar kerja: 260 mm, tinggi kerja: 150 mm, panjang kerja: 4.500 mm, Penawaran wajib dibongkar antara 1 April 2026 dan 3 April 2026. DETAIL TEKNIS Area kerja sumbu-X: 4.500 mm Area kerja sumbu-Y: 260 mm Area kerja sumbu-Z: 150 mm Panjang meja: 4.500 mm Jumlah spindle milling: 1 unit Posisi penukar alat: 24 posisi DETAIL MESIN Konsumsi daya: 63 A Sekering: 80 A Daya: 32,0 kW Tegangan: 400 V Total tinggi: 2.900 mm Kjdpfx Aeyh Uxyec Hjln Berat: 14.000 kg PERLENGKAPAN Rangkaian listrik (NL, DE, dalam bentuk cetak) Daftar suku cadang (NL, DE, dalam bentuk cetak) Manual pengguna (NL, DE, dalam bentuk cetak) Alat bor Catatan: Mesin dijual tanpa alat.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Lelang Weinig Unimat 500! Mesin masih beroperasi hingga pertengahan Mei. Pemeriksaan dapat dilakukan dengan janji terlebih dahulu! Kedsyh Uw Njpfx Ac Hsln

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, Lengan Romer 7-sumbu dengan kepala laser RS6 berlampu biru, 1.200.000 titik per detik, bidang ukur 2,5 m, dengan remote control, perangkat lunak PCDMIS. Mesin luar biasa dengan penyeimbangan bobot otomatis. Produktivitas dan presisi tinggi dengan kemampuan kerja yang sangat baik di setiap permukaan. Kljdpfx Aceipq Ivj Hsn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 560123, Fungsionalitas: berfungsi sepenuhnya, laju aliran volumetrik: 16.000 m³/jam, panjang total: 12.000 mm, lebar total: 2.400 mm, Perlengkapan: Penandaan CE, DETAIL TEKNIS Kapasitas: 16.000 m³/jam Ksdpfxeyh Nyfs Ac Holn Jumlah kantong filter: 180 pcs Diameter sambungan: 600 mm Kipas utama: 22 unit DETAIL MESIN Dimensi (P x L): 12.000 x 2.400 mm PERLENGKAPAN Tanda CE

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: 5/1-107, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 1.730 mm, panjang total: 6.100 mm, lebar total: 1.440 mm, Perlengkapan: Penandaan CE, Mesin ini memiliki konfigurasi sebagai berikut: 1. Unit pra-pemotong (perkakas tersedia) 2. Unit lem 3. Rol penekan (perkakas tersedia) 4. Unit penggutir (perkakas tersedia) 5. Tidak dispesifikasikan (perkakas tersedia) 6. Unit pemutar sudut (perkakas tersedia) 7. Unit penarik radius (perkakas tersedia) 8. Tidak dispesifikasikan (perkakas tersedia) 9. Unit penarik datar (perkakas tersedia) RINCIAN MESIN Kjdpfjyh Nt Ssx Ac Heln Jumlah unit: 9 buah Tegangan: 400 V Konsumsi arus: 21,9 A Sekring: 50 A Dimensi Dimensi (P x L x T): 6.100 x 1.440 x 1.730 mm Paket transportasi: 1 unit PERLENGKAPAN Tanda CE

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, saluran warna: 5, berat kertas (min.): 40 g/m², berat kertas (maks.): 370 g/m², lebar kertas (min.): 400 mm, lebar kertas (maks.): 800 mm, tinggi kertas (min.): 260 mm, tinggi kertas (maks.): 600 mm, tegangan masuk: 380 V, en001 Kjdpfxjwtzp Te Ac Hsln

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2020, model controller: Delem DA-41s, gaya tekuk (maks.): 40 t, lebar kerja: 1.800 mm, panjang langkah: 100 mm, jumlah sumbu: 4, RINCIAN TEKNIS Jarak gerak: 1800 mm Maks. langkah angkat: 100 mm Tekanan tekan: 40 t Jumlah sumbu: 4 Klodsyh Nrbspfx Ac Hjn RINCIAN MESIN Kontrol: Delem DA-41s Dimensi & Berat Dimensi (P x L x T): 2.450 x 1.900 x 2.140 mm Berat transportasi: 5.500 kg Jumlah kemasan transportasi: 2 Daya terpasang: 4,0 kW PERLENGKAPAN Peralatan Penahan punch pelepas cepat Tipe penahan alat model Eropa Pelindung jari

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 3.500 rpm, jarak pergerakan sumbu X: 271 mm, jarak lintasan sumbu Y: 600 mm, lebar di tengah: 600 mm, Perlengkapan: konveyor serpihan, pengumpan batang, RINCIAN TEKNIS Diameter putar di alas: 350 mm Jarak antara senter: 600 mm Lebar alas: 210 mm Perjalanan sumbu X: 271 mm Perjalanan sumbu Y: 600 mm Lubang spindle: 62 mm Kecepatan spindle maks.: 3.500 rpm DETAIL MESIN Pabrikan kontrol: Siemens Daya: 30,0 kW Dimensi & Berat Dimensi (P x L x T): 4.300 x 2.100 x 2.100 mm Berat kosong: 5.000 kg Berat transportasi: 5.000 kg PERLENGKAPAN Konveyor serpihan Chuck tiga rahang Pengumpan batang Peralatan bertenaga Sumbu C Kledeyh Npmspfx Ac Hen

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, lebar pemotongan (maks.): 800 mm, kedalaman penyisipan: 800 mm, tinggi penyisipan: 150 mm, panjang pemotongan (maks.): 800 mm, berat keseluruhan: 500 kg, jenis arus masuk: tiga fasa, lebar total: 160 mm, panjang total: 200 mm, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Il tagliacarte MOHR 80 è progettato per un funzionamento a turno singolo. Il taglio preciso e delicato a movimento oscillante viene eseguito idraulicamente. Il tempo di permanenza della lama nel punto morto inferiore può così essere adattato al materiale. La superficie ultra-liscia del tavolo in acciaio inox, dotata di getti d’aria, consente una movimentazione agevole del materiale. La pressione del pressino può essere regolata in modo continuo e preciso per ciascun materiale tramite una manopola graduata, all’interno di un ampio intervallo di impostazione. I LED ad alta luminosità segnano chiaramente la linea di taglio, ben visibile all’operatore. Il controllo della macchina si effettua tramite un display touch-screen ergonomico da 18,5’’. Sequenze di taglio ricorrenti possono essere memorizzate (capacità di memoria: 1.998 programmi) e adattate in qualsiasi momento. Integrato nel flusso di lavoro digitale, i dati di taglio vengono trasferiti direttamente dalla prestampa a Compucut®, tramite file ppf o jdf; Compucut® genera automaticamente il programma di taglio, che può essere avviato tramite lettore di codici a barre per ridurre quasi a zero i tempi di set-up. La visualizzazione del processo mostra graficamente la movimentazione del materiale, minimizzando il rischio di errori. Per ottimizzare la qualità di taglio, il tempo di pre-pressatura può essere adattato in base al materiale. Lettore di codici a barre per la creazione automatica del programma di taglio e caricamento del programma associato tramite Compucut® Visualizzazione del processo per la rappresentazione grafica della gestione del materiale e riduzione del rischio di errori Telaio macchina con stabilità ottimizzata per assorbire efficacemente le forze di taglio e ottenere la massima precisione Minime esigenze di manutenzione grazie all’impiego di materiali innovativi Kedpfxexwnxgo Ac Heln Larghezza di taglio 800 mm | 31,49 in Profondità di alimentazione 800 mm | 31,49 in Altezza massima di alimentazione 100 mm | 3,93 in Pressione minima pressino 180 daN | 397 lbs Pressione massima pressino 2.700 daN | 5.953 lbs Velocità di ritorno del carrello (0 - ...) 130 mm/sec 5,12 in/sec Taglio minimo automatico senza piastra falsa 15 mm 0,60 in Taglio minimo automatico con piastra falsa 50 mm 1,96 in Dimensioni (L × P × H) 1.430 × 1.970 × 1.500 mm 56,29 × 77,55 × 59,05 in

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2004, nomor mesin/kendaraan: B8820, jenis aktuasi: hidrolik, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 8 mm, daya: 15 kW (20,39 hp), berat keseluruhan: 9.800 kg, RINCIAN TEKNIS Ketebalan plat maks.: 8 mm Lebar kerja maks.: 3.100 mm Klodpfx Acoyh Nl Is Hen Kedalaman stop: 1.000 mm DETAIL MESIN Pengoperasian: CNC Daya: 15,0 kW Dimensi & Berat Dimensi (P x L x T): 4.000 x 2.200 x 2.100 mm Berat: 9.800 kg Paket transportasi: 1 PERLENGKAPAN Stop elektrik Perangkat penyangga plat pneumatik Pelindung jari tetap Pengaturan sudut bermotor Pengaturan celah potong bermotor Meja bearing bola Dokumentasi Tanda CE

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan di atas alas geser: 630 mm, tinggi pusat: 315 mm, lebar di tengah: 8.000 mm, kecepatan spindel (maks.): 1.180 rpm, berat kosong: 9.000 kg, RINCIAN TEKNIS Ketinggian senter: 315 mm Jarak antara senter: 8.000 mm Diameter putar di atas tempat tidur: 630 mm Kledpfxsyh Nk Ro Ac Hjn Diameter putar pada eretan: 360 mm Lebar bed: 700 mm Lubang spindle: 62 mm Kecepatan spindle maks.: 1.180 rpm RINCIAN MESIN Pengendalian: Konvensional Daya terpasang: 22,0 kW Dimensi & Berat Dimensi (P x L x T): 10.560 x 1.710 x 1.400 mm Berat kosong: 9.000 kg PERLENGKAPAN Tampilan digital

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 500 mm, ketinggian potong (maks.): 145 mm, lebar pemotongan (maks.): 510 mm, berat keseluruhan: 400 kg, diameter nosel ekstraksi: 150 mm, kecepatan rotasi (min.): 2.800 rpm, daya: 5,5 kW (7,48 hp), STROMAB PS 50/F Crosscut Swing Saw – Brand New Kedpfjrdwm Tox Ac Hsln Specifications: • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor spindle diameter: 30 mm • Motor speed: 2,800 rpm • Maximum cutting width: 510 mm • Maximum cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • Machine complies with CE standards Additional information: • Tables shown in the photos are included with the machine (2 x 2.0 m) • Available within 7-10 working days • Stated price does not include VAT or shipping costs

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 46876, Tahun pembuatan: 2019, jam operasional: 15.564 h, kapasitas angkut: 2.500 kg, tinggi angkat: 5.570 mm, pengangkatan bebas: 1.580 mm, panjang garpu: 1.060 mm, lebar garpu: 1.360 mm, DETAIL TEKNIS Kapasitas angkat: 2.500 kg Tinggi angkat: 5.570 mm Free lift: 1.580 mm Tinggi lewat: 2.450 mm Panjang garpu: 1.060 mm Lebar garpu: 1.360 mm Lebar minimum garpu: 290 mm Kledpfoyh Nhpox Ac Hon DETAIL MESIN Jenis bahan bakar: listrik Tipe tiang: Triplex Dimensi & Berat Dimensi (P x L x T): 1.530 x 1.500 x 2.460 mm Berat kosong: 6.500 kg Tahun pembuatan baterai: 2025 Kapasitas baterai: 930 Ah Jam operasional: 15.564 jam PERLENGKAPAN Sisi geser Penyesuaian garpu Baterai baru Setengah kabin Lampu kerja Free lift