Kompresor refrigeran

Mark MSB 18 IVR compressor

Kondisi: baru, nomor mesin/kendaraan: Baureihe GSL 300 / Neumaschine, The granulators of the GSL series 300/400 to 300/800 are primarily designed for the size reduction of production-related scrap material in injection molding and blow molding applications. In addition to the key advantages of the GSL series, the slow-running granulators GSL 300/400, GSL 300/600, and GSL 300/800 are particularly suitable for processing large-area components, such as automotive door panels, bumpers, or hollow bodies. Nedsghgbhepfx Abuowb The “V-arrangement” of the rotor knives ensures that the pre-shredded material is held at the center of the rotor. This significantly reduces wear on the grinding chamber walls when processing glass fiber-reinforced plastics. Material build-up on the side walls is eliminated. Due to the staggered rotor discs, only individual knives are engaged at any one time, allowing for increased cutting force with each cut.

Kondisi: baru, nomor mesin/kendaraan: Baureihe GSP, Conventional granulators face significant challenges when shredding long pipes and profiles. In most cases, pits or platforms are required to enable the feeding of these long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the nearly horizontal feed hopper, long parts can be conveniently fed, and the risk of blockages is eliminated, as the machine doses automatically. If the grinding chamber becomes overfilled, no further material is accepted until operation can resume without overloading the motor. Nwsdpfsghgftox Abueb ZERMA also offers a wide range of options, such as extraction systems, conveyor belts, metal detectors, fines separators, and more.

Kondisi: bekas, nomor mesin/kendaraan: 11056, 3-knife rotor 2 rows of stator knives Njdpfxeghghks Abuswb Rotor diameter: 350 mm Working width: 600 mm Infeed opening: approx. 600 x 450 mm Machine equipped with soundproof enclosure

Tahun pembuatan: 2024, Kondisi: baru, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces Nodpfx Ajp Sr H Dsbuewb In a compact redesign, the best features of the proven GST and GSC series have been combined, with special attention given to weight, handling, and energy efficiency. These compact granulators are equipped with full sound insulation, resulting in extremely quiet operation. The granulators are available with a 250 mm rotor diameter and working widths of 300, 450, and 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine, reducing downtime during maintenance. The strongly tangential, curved rear wall of the cutting chamber in conjunction with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. These compact granulators are suitable for use in blow molding plants. They are ideal for recycling large-volume components such as bottles, canisters, and crates. Thanks to the low feed height, the machines can be easily loaded either manually or with a small conveyor. The low noise emissions and small footprint make the granulator a perfect solution for inline size reduction. Optional rear wall with raised stator knife, M version: The infeed method with a raised stator knife is better suited for thicker-walled and more compact parts such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the less aggressive rotor, high-quality regrind is achieved regardless of material type or form, for example injection-molded parts, profiles, sheets, etc. Control and control cabinet: The integrated control system and operating console not only comply with all applicable safety regulations but can also be adapted to specific requirements. Additionally, peripheral devices such as feeding conveyors, metal detectors, and discharge systems can be seamlessly integrated into the machine’s control system. An optional intelligent energy-saving function is also available for increased efficiency, reducing power consumption during idle times and enabling the system to start and stop automatically based on the status of upstream equipment. Standard configuration with blower, power consumption 0.75 kW, and 400 cyclone Rotor diameter (mm): 250 Rotor width (mm): 450 Drive power (kW): 7.5 Number of rotor knives: 3 x 2 Number of stator knives: 2 Screen perforation (mm): > 6 Weight approx. (kg): 700 Feed opening (mm): 380 x 450 Feed opening, M version option (mm): 295 x 450

Tahun pembuatan: 2022, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, - Mill for e.g. lumps - New / Unused machine - Open rotor - Grinding chamber 650 mm x 550 mm - Control unit Nwjdpfjp E Anvex Abujb Spare parts can be supplied (screen, knives, etc.).

Kondisi: sangat baik (bekas), Dryer tank 5.4 m³ 3.50 m x 1.40 m Nwedpfx Ajrtrv Ssbujb

Kondisi: bekas, Tahun pembuatan: 2012, nomor mesin/kendaraan: 205066, Data teknis: - Tekanan kerja: 11 bar - Kapasitas suplai: 1960 l/menit - Penggerak: 400 V / 15 kW Nwedpfx Ajx E Ucksbusb - Jam operasi kira-kira: 8084 jam - Jam beban: 1690 jam - Berat sekitar: 400 kg - Tangki udara merk OKS: 500 l