Perangkat pemutar kontainer

MECHACON - HEINRICHSGLÜCK - TR150M-ST

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Kdsdpfx Aeg U Uv Rscijn Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Tahun pembuatan: 1990, I-beam steel, flat 140 x 140 x 13 mm I-beam steel, vertical 120 x 120 x 13 mm Angle steel 130 x 130 x 12 mm Round steel 85 mm Bending capacity – flat bar 125 x 25 mm Flat bar on the edge 65 x 65 mm Including various rollers: Tube Ø: 219 mm (Tool/roller Ø 535 mm) 140 mm (Tool/roller Ø 420 mm) 273 mm (Tool/roller Ø 520 mm) 203 mm 168.3 mm (Tool/roller Ø 500 mm) 75 mm (Tool/roller Ø 400 mm) 49 mm (Tool/roller Ø 420 mm) 48.3 mm (Tool/roller Ø 420 mm) Kodpstt Ecdofx Aciodn 22.5 mm (Tool/roller Ø 420 mm) 32/32.5 mm (Tool/roller Ø 420 mm) 60 mm (Tool/roller Ø 420 mm)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Bandwidth: 1,500 mm Kdedsqw Akmopfx Acien Strip thickness: 0.6 - 3 mm Coil weight: 10 t

Kondisi: baru, Bandsawing machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Article No.: 3690041 Kjdpsilg Hdjfx Aciedn Condition: New machine Cutting range (round): 300 mm Blade speed: 20–100 m/min, steplessly adjustable Standard features: - Fully hydraulic, semi-automatic design: Upon start, the machine clamps automatically; after cutting, it returns to the home position, stops the saw blade, and opens the vice. - Cut sensor for automatic material height detection - Horizontal vice, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Swarf removal brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Kondisi: baik (bekas), Tahun pembuatan: 2010, tr-001 Kjdpfx Acexxz E Neiodn

Kondisi: baru, Load capacity 500 kg Number of suction pads: 6 Diameter of suction pads: 215 mm Vacuum Lifter VH 6-500 For horizontal transport of smooth, dry, and airtight panels. Robust load-bearing steel construction, painted in RAL 2000, with low dead weight. Consisting of: - 1x Galvanised longitudinal beam, length 2,400 mm - 3x Galvanised crossbeams, length 1,000 mm - 6x Spring-mounted, articulated, and adjustable suction pad holders - 6x Suction pads Ø 215 mm; in case of wear, seals can be inexpensively replaced without tools, separate from their metal carrier - 6x Ball valves to individually shut off suction pads, allowing smaller formats to be lifted without having to move the pads or beams - 1x Spiral connection cable, small coil: * Extension length 3,500 mm, designed as extension cable with CEE plug and socket Kdsdpfx Aeq Sc Auocion * Routed alongside the load chain to the lifting device - Low-maintenance, high-quality, dry-running rotary vane vacuum pump with suction capacity of 8 m³/h and final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m) and CEE plug (16 A). Isolation transformer integrated into the control system (necessary if the vacuum lifter is connected via the crane trolley and no neutral conductor is present) - Operating handle extendable up to 1,000 mm from the centre of the beam - Stable sheet metal pocket for your crane controls included, at no extra charge - Operation "Suction / Release" via hand slide valve: Wear-free and very robust hand slide valve ensures secure suction and release following actuation of the release button (double release according to EN 13155) - Control and safety device for vacuum lifter: * Sturdy control box * Contactor circuit for the vacuum pump * Safety warning device with acoustic alarm * Vacuum gauge with danger zone indicator * Large vacuum accumulator tank with safety non-return valve * Double release operation when unloading - Fine dust filter to protect the vacuum pump - Comprehensive and easily understood documentation Guarantee against material and manufacturing defects for one year under single-shift operation (excluding wear parts). Initial safety inspection UVV 18, VBG 9a, with CE declaration of conformity – according to EN 13155 - Packaging for truck transport.

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), Technische Daten: -Hersteller: DRAWEBA -Modell: DDANS 17 l -Baujahr: 1978 -Drahtdurchmesser: 1,4 - 1,6 mm Ksdpfx Acslf Iqneiodn -Maschenweite (min.): 10 x 10 mm -Netzbreite: 1600 mm

Kondisi: diremajakan ulang (bekas), berat keseluruhan: 7.800 kg, Jaw opening: 650 x 450 mm Kodpfxjq Tth Ts Aciodn Capacity: 12 - 60 m³/h Gap width: 35 - 150 mm Weight: 7,800 kg Power requirement: 45 kW Completely workshop overhauled and newly fitted with bearings

Kondisi: siap digunakan (bekas), Eine Flachschleifmaschine ELB-Schliff mit Positionsanzeige steht zur Verfügung. Magnetplattendimensionen X/Y: 900mm/450mm, Schleiflänge: 900mm, Schleifbreite: 450mm. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Kdodpfx Acjya Hw Ijisn

Tahun pembuatan: 2009, Kondisi: baik (bekas), nomor mesin/kendaraan: 120P1109, OFFER 21407 Motorized Container - Vessel Rotator with Rail-mounted Carriage Technical Data: - Total load capacity (driven + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Roller support centers adjustable via trapezoidal threaded spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with dual-sided drive Ksdpfx Acjhcnhmsijdn - Infinitely variable rotation speed - Hand-held remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Space requirement for driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight of driven unit: approx. 2,500 kg - Weight of idler unit: approx. 1,800 kg