Pers eksentrik

MA.TE JL21-160

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Rodpjkvnumjfx Aahock Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: bekas, Tahun pembuatan: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Rodpfscxxx Hex Aahsck Ram adjustment: 63 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight approx.: 3.5 t

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, CNC twin-spindle turning center Control system: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G TECHNICAL DATA Max. turning diameter: 340 mm Spindle distance: 1470 mm Turning length: 1135 mm Swing diameter over bed: 700 mm Swing diameter to tool turret 2: 540 mm Travel distances: X1 – Tool turret I: 270 mm Y1 – Tool turret I: 120 mm Z1 – Tool turret I: 1200 mm X2 – Tool turret II: 195 mm Y2 – Tool turret II: 80 mm Z2 – Tool turret II: 1200 mm X3 – Counter spindle slide: 180 mm Z3 – Counter spindle slide: 1200 mm Main spindle Integrated spindle motor ISM 102 Drive power (100/40% duty cycle): 40/48 kW Torque (100/40% duty cycle): 570/680 Nm Speed range: 0–4000 rpm Bar capacity: 102 mm Drawtube inner diameter: 104 mm C-axis and spindle brake (angular resolution): 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle): 25/32 kW Torque (100/40% duty cycle): 280/380 Nm Speed range: 0–5000 rpm Bar capacity: 65/75 mm C-axis (angular resolution): 0.001° Slide 1 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 2 Tool turret (direct drive) Number of tools: 12 VDI toolholder diameter (DIN 69880): 40 mm Max. power (100/40% duty cycle): 10.9/14.2 kW Max. torque (100/40% duty cycle): 26/34 Nm Speed range: 40–10000 rpm Slide 3 Rapid traverse speed X-/Z-axis: 30/45 m/min Tool resolution Z-axis: 0.001° Feed force (40% duty cycle) X-/Z-axis: 16/13 kN EQUIPMENT/ACCESSORIES  Short bar loader IRCO ILS-RBK 100/16  Various main spindle reduction sleeves  NC-controlled workpiece pick-off device for main and counter spindle The unit consists of an NC-controlled: * Horizontal axis * Swivel unit * Vertical axis * 2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removal of workpieces from the machine  Coolant system 8/20 bar with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°C)  Counter spindle slide  Easy-Tool Monitor  1 collet chuck for quick-change chuck, size 100, for main spindle  1 collet chuck for quick-change chuck, size 100, Nova AxisFix for counter spindle  Approx. 40 various quick-change chuck heads, size 100 (entire stock)  Pneumatic changeover device, ø 100 mm  Approx. 50 various tool holders, static and driven (entire stock)  Mounting elements  Documentation Rsdpfx Aowcd S Njahock

Kondisi: bekas, eccentric-press-automat-haulick-roos-type-rvd-125-double-column- eccentric-press-serial-no-212560-year-1981-pressing-force-125-ton s-table-size-880-x-800-mm-table-opening-470-x-140-mm-frame-width- 900-mm-side-frame-width-415-mm-ram-stroke-45-mm-ram-adjustment-ra nge-0-80-mm-installation-height-as-shown-340-mm-strokes-per-minut e-50-to-300-main-drive-motor-power-22-kw-power-supply-380-volt-50 -hz-double-connecting-rod-drive-mechanism-with-4-fold-mounted-ecc entric-shaft-for-off-center-ram-load-side-mounted-control-cabinet -nc-roll-feeder-ebu-width-250-mm-year-2003-standalone-control-pan el-for-roll-feeder-strip-feed-direction-left-to-right-space-requi rements-press-l-x-w-x-h-3000-x-2000-x-3020-mm-transport-height-29 50-mm-weight-of-press-approx-11-tons Rjdpfohlnzkex Aahsck

Kondisi: bekas, Tahun pembuatan: 1977, Pressure: 250 t Stroke: 40 - 190 mm Strokes per minute: 40 /min Throat depth: 500 mm Clearance between side frames: 1,050 mm Shut height: 615 mm Table dimensions: 1,380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1,200 x 800 mm Ram adjustment: 125 mm Rsdpfx Aovuuaisahsck Drive power: 22.0 kW Weight: 24.0 t Space requirement (L x W x H): approx. 2.0 x 2.5 x 3.95 m Approved for manual loading operations in accordance with German accident prevention regulations (UVV) Equipped with: motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand operation

Kondisi: baru, gaya penekanan: 100 t, panjang langkah: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable - Electrically or manually operated - Pressure gauge - Emergency stop Redpfxjgp Dc Rj Aahsck - 400V

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, nomor mesin/kendaraan: 06 61 218, EN-Lg32821-2024-1 Rsdsg U Utvspfx Aahsck

Kondisi: bekas, Double-column eccentric stamping press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with roller feed ALBA Machine No. 88151005 Year of manufacture 1988 / 92 Pressing force: 160 tons Frame width: 970 mm Frame width lateral: 560 mm Table size: 900 x 900 mm Ram surface: 900 x 700 mm Tool installation height: 560 mm, max. 700 mm Stroke adjustment: 8–160 mm Ram adjustment travel: 125 mm Strokes: 25 to 70 strokes/min. Strip width in roller feed: max. 400 mm Motor power: approx. 15 kW Mains connection: 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Automatic stroke adjustment - Ram weight counterbalance cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Control cabinets for press and feed unit, mounted together on a platform adjacent to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Width of the press without feed: 2100 mm Depth of the press with drive motor: 2300 mm Overall height of the press: 4150 mm Net weight of stamping press: approx. 18 tons For transport, the drive motor is dismantled and the machine is laid on its side. Included: NC roller feed-straightening machine ALBA Type GGVHY400 Unit Nos. 1405 and 1406, Order No. 910708 (Year of manufacture 1992) - Feed control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross section max. 1200 mm² - Roller drive of the feed hydraulically controlled - Height-adjustable feed unit on press for adapting material entry height - Adjacent hydraulic unit - Drag straightener with hydraulic opening and closing Weight of complete system: approx. 24 tons Space required for transport: one mega trailer with 3 meter internal height and 13.6 meter loading length Good condition Rjdodzqlvepfx Aahock

Kondisi: baik (bekas), Pabrikan: WEINGARTEN Tipe: ER 125 Ukuran meja: 800x620 mm Rcedpfx Asn D Ebaeahok Terdapat retakan kecil yang terlihat pada bagian penahan beban mesin press; mesin telah digunakan seperti ini selama bertahun-tahun. !!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, with soundproof cabin Rodpfxji An Tto Aaheck Table surface 1000x550 mm, ram surface 1000x450 mm