Tekan hidrolik - horizontal

MAE R160S

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 540 mm, jarak lintasan sumbu Y: 240 mm, kecepatan spindel (maks.): 1.650 rpm, kecepatan spindel (min.): 45 rpm, penjepit spindle: MK 4, kedalaman tenggorokan: 350 mm, gores kuas bulu: 130 mm, panjang total: 1.250 mm, tinggi total: 1.900 mm, lebar meja: 225 mm, lebar total: 1.100 mm, panjang meja: 800 mm, kapasitas pengeboran: 40 mm, hidung spindel: MK-4, daya nominal: 2,2 kW (2,99 hp), Drilling/milling machine, drilling capacity Ø 40 mm, 2-speed motor 1.9/2.2 kW, table size 800x225 mm, spindle speed 45-1650 rpm stepless via variator, MK 4, machine lamp, motorized table elevation, automatic feed, fine adjustment, depth stop, coolant system, dimensions 1250x1100x1900 mm, weight approx. 600 kg Bdodpfx Aewt Swzsm Iob

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Bdsdpfx Asg U Uv Rem Isb Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Tahun pembuatan: 2024, Kondisi: baru, ‼️SPECIAL OFFER‼️IN STOCK NOW IN HEILBRONN! Only while supplies last! ‼️IMMEDIATELY AVAILABLE‼️IN STOCK‼️ Powerful, robust machine at an attractive price from Josan & Söhne Small Alligator Shear: ➡️3 kW motor ➡️7 to 8 strokes per minute ➡️Dimensions: 1100 x 980 x 800 mm ➡️Weight: approx. 275 kg ➡️Jaw opening: 15 cm ➡️Blades can be reversed once they become dull, allowing for extended usage ➡️Health and Safety Regulations (UVV) implemented by a German company Net price: €3,999.00 +19% VAT: €759.81 Gross price: €4,758.81 Large Alligator Shear: ➡️7.5 kW motor ➡️Jaw opening: 30 cm ➡️7 to 8 strokes per minute Bdedpsp E Ehqofx Am Iob ➡️Dimensions: 249 x 109 x 174 cm ➡️Weight: approx. 1,500 kg ➡️Blades can be reversed once they become dull, allowing for extended usage ➡️630 kN force ➡️Hydraulic pressure: 21 MPa ➡️Health and Safety Regulations (UVV) implemented by a German company PRICE ON REQUEST Images/Equipment may vary. Subject to errors and changes.

Kondisi: baru, Brugger HX16 Pro professional petrol wood chipper. This wood chipper is designed for professional use. Thanks to its high-quality construction and powerful drive, even heavily branched material is no problem! It effortlessly processes logs with diameters up to 16 cm. Powered by a robust 35 HP Rato petrol engine, it is also equipped with a no-stress automatic feed system, which prevents the engine from stalling under overload. The HX16 Pro comes with an "AL-KO" chassis and lighting system to meet your requirements. Bdjdpfx Amjmfnz Ee Ieb Thanks to its road approval, the chipper can be transported anywhere. Features: - Maximum log diameter: 16 cm - Feed opening: 16.5 cm x 30 cm - 35 HP Rato petrol engine - No-stress automatic feed system - Hydraulic feed - Weight: 730 kg Delivery possible throughout Europe. -- Trailer chipper, wood chipper, wood shredding machine, branch chipper, professional chipper, wood shredding machine

Tahun pembuatan: 1971, Kondisi: bekas, en-GB:Technical Details: Maximum wheel diameter: 300 mm Module range: max. 5 / min. 0.5 Maximum workpiece weight: 60 kg Approx. machine weight: 4.0 t Machine dimensions (LxWxH): 1800 x 1850 x 2500 mm Control cabinet dimensions: No. 1: 1930 x 400 x 1920 mm No. 2: 800 x 230 x 1950 mm Exhaust system dimensions: 1400 x 700 x 560 mm Cooling unit dimensions (LxWxH): 1.2 x 1.0 x 0.45 m Electronically controlled gear flank grinding machine Suitable for modules up to 5 and diameters from 240 – 300 mm Stepless feed rate per workpiece revolution: 0.4 – 3.2 mm Max./min. number of teeth: 130 / 12 Max./min. pressure angle: 30° / 14°30′ Max./min. helix angle at 24 teeth: 6000 / 200 mm Max. helix angle, both sides: 45° Grinding worm speed: 1,900 rpm Bdodevc Apbjpfx Am Ieb Supplied without dressing attachment Equipment: Approx. 77 various change gears, extension pipes, and various accessories Two of these machines are available for sale. Both machines are supplied via two shared control cabinets and an exhaust system.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD Bjdpfxotr U Hlj Am Iedb → Maximum bending capacity tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity tube 30 x 30 x 3 mm → Maximum bending capacity tube 42.4 x 2 mm (stainless steel 0.2 = 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for bending, feed, and rotation axes. The touchscreen control enables straightforward and intuitive programming and operation of the machine. After loading the tube, it is secured by the chuck in the carriage. This enables precise positioning of the tube, ensuring contour-accurate geometries. Standard features include geometry control before the bending process: if the bending process is initiated at the wrong position, the machine will not grant approval, thus eliminating operator error. Optional features add convenience, boost output, and therefore increase system efficiency. Data exchange with the optional pipe calculation software TBS-3D (PC version) is via USB stick or network. Existing pipe geometries can be imported using the software. Standard Equipment: → Servo drive for bending axis 1.5 kW → Adjustable rotational speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The controller directly calculates the feed values and bending angles after entering length and angle values. Power supply: 400V 16A Dimensions: L: 2.3m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), I have for sale a Deckel Maho DMU 100T Machining Centre. Control system: Heidenhain MillPlus Machine technical condition: Very good Year of manufacture: 2000 Country of origin: Germany Machine specifications: X-axis travel: 1080 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Swivelling head Maximum spindle speed: 12,000 rpm Tool magazine: 32 tools (2x16 tools) High-pressure coolant Through-spindle coolant Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Bsdpfx Ajlffzcem Iedb Spindle taper: SK40 Complete programming manual Documentation Machine weight: 10 t Loading included in the price Stal-Com has been specialising for 17 years in the sale, servicing, and training on CNC machines from the DMG group. We specialise in all models of Gildemeister lathes and Deckel Maho Machining Centres. All our machines undergo a meticulous technical inspection. In addition to clients from Poland, our machines are purchased by customers throughout Europe and some parts of Asia. Each machine can be inspected during operation, as we also carry out machining services. Upon purchasing a machine from us, we provide personnel training and can also assist in setting up part production at your site. We cooperate long-term with many companies, supplying them with successive machine tools. Stal-Com Rafał Dziendziel

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lebar roda: 800 mm, modul 1-6 diameter maks 600 mm Bdjdpfx Asxhck Sem Isb pembacaan digital Mesin lengkap dengan dokumentasi, dudukan alat, roda gigi cadangan,...

Kondisi: bekas, Tahun pembuatan: 2001, Tischlänge 600 mm Tischbreite 380 mm Steuerung FANUC 16i-M Längsweg 500 mm Querweg 300 mm Größter Schleifdurchmesser 230 mm Koordinatenschleifmaschine | HAUSER - S35-400 Die Maschine ist in einem gepflegten Zustand. Bitte beachten Sie, dass die technischen Details aus vergleichbaren Maschinen hinzugefügt wurden. Das Maschinenvideo vom Werksstandort teilen wir gerne auf Anfrage mit Ihnen. #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 Bdedpfowmwwyjx Am Isb

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° Bdsdpfxsttah Rj Am Ijb → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.