Beli Mesin press untuk kayu & serbuk kayu bekas (591)

Kondisi: baru, Tahun pembuatan: 2026, en-GB Fodpfx Aed Nm Sijirogc

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Machine for Sale at a Special Price Machine available immediately (ex works Neckartailfingen) Demo machine Fgjdpsfci D Asfx Airsc Your Advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation The press is manually switched on and runs until the set time on the timer (e.g., 4 hours) has elapsed. After that, the press switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Throughput capacity up to a maximum of 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 15% (ATRO) - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: -Timer function + €490 net Machine is started manually and switches off automatically after the set time. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Price surcharge + €690 net (delivery time approx. 8 weeks) ---

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 8 h, en-GB Fgodpjxfwdjfx Airjc

Kondisi: baik (bekas), Used, good condition. Technically inspected used machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (for example for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optional production of short briquette tablets possible Technical data: Throughput rate up to max. 750 kg/h (depending on material) (e.g. sawdust with a bulk density of 250 kg/m³) An exact statement on throughput can only be made after testing with your material, as this may vary significantly depending on bulk density. Customs tariff number: 84793010 Briquette diameter: 65 mm including 2 m press channel Main motor power: 37 kW Feed screw gear motor: 2.2 kW Compactor screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with operating hour counter in switch cabinet Machine bears CE mark Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3800 kg Options at extra cost: Temperature control unit for press tools For maintaining optimal temperature and briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch. Wired ready for operation – essential for functionality including corresponding control system + €7,850 net Guillotine or tablet breaker, Fedjfmqq Espfx Airsgc For cutting briquettes to length + €6,900 net Connection to compressed air required! Silo for MAP series + €19,940 net – Storage silo above machine – Capacity approx. 6 m³, robust steel construction with agitator discharge and level indicator. Transport pipe / cooling section (nominal size: 4x2m) Every 2 meters €990 net Assembly / commissioning (nominal: approx. 2–3 days on site) Billed by time and material. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Saturday/night hours: 50% surcharge Sunday and holiday hours: 100% surcharge Per diem per technician: depending on country Per car/van and driven kilometer: €0.98 / km Travel and accommodation: reimbursed based on receipts or by flat rate, borne by the client. Testing with customer material: (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for raw material: – Moisture content (atro) must be at least 6% and no more than 15% – Chip length max. 18 mm – Installation temperature: heated space, at least +5°C – Feedstock must be free of metals and mineral impurities. Damage to press tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur. Fsdpfjffh Atox Airegc

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 29 h, Another machine immediately available ex works from Neckartailfingen *Interim sale expressly reserved *Silo available at additional cost Press only available when ordered with a system component - such as a shredder, cutting mill, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction unit RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette vendors. Type Classic – throughput up to 425 kg/h *depending on material Options (subject to additional charge): plant engineering / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary airlock - Screw conveyors - Silos - All types of control system integrations - Semi-automatic packaging equipment Your benefits: Key point: + Highly established, mature matrix press thanks to 25 years of experience. The challenge and expertise are in the details, e.g., top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data – Briquetting press: Throughput capacity: up to 425 kg/h* *depending on bulk density of your input material Fedpfxefhql Tj Airjgc *based on 200 kg per cubic meter bulk density Detailed information after successful testing with your material. If test material cannot be provided, we cannot guarantee briquette quality or throughput capacity. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compactor Hydraulic main compactor Pressing force: approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual operation for all cylinders Control cabinet "dust-protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - The moisture content (atro) must be at least 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient installation temperature: min. +8°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear --- Options at extra cost: Fgsdpfx Asd Nnwleirsc - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baik (bekas), Overhauled used machine *Optional features available at extra cost, see below with full 1-year warranty Ready for delivery approx. 16 weeks after order Technical specifications: Throughput rate up to max. 1,200 kg/h, depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm Includes 2 m press channel Main motor power: 45 kW Feed auger geared motor: 2 x 2.2 kW Compactor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operating states and utilization display for main drive and feed screws Siemens S7/300 PLC control with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 4,500 kg Options: Silo for MAP series (suitable only for one MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT -Temperature control unit for press tools To maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch Fully wired and ready for connection — essential for operation including corresponding control unit €7,850 net -Guillotine for cutting briquettes to length Compressed air supply required on site €6,940 net plus VAT -Transport line / cooling section (nominal: 4 x 2 m) Per 2 meters: €990 net Assembly / commissioning (nominal per press: approx. 2–3 days on site) Charged according to actual time; invoiced separately. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Surcharge for overtime: +25% Saturday and night hours: +50% surcharge each Sunday and holiday hours: +100% surcharge each Daily allowance per technician per day: country-dependent Fgodps E Dquofx Airjc Per car/van and driven kilometer: €0.98/km Travel and accommodation billed at cost or by flat rate to the customer’s account. Testing with customer’s own material: (by agreement, up to max. 750 kg) — flat rate €1,970 net ---- Requirements for raw material: - Moisture content (atro) must be at least 6% and max. 18% - Maximum chip length: 20 mm - Installation temperature: heated room, minimum +5°C - The feed must be free from metal and mineral contaminants. Damage to the press tools and/or increased wear may result.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Kondisi bekas yang baik Jam operasi rendah (1675 jam). Fgodpfx Ajwcc D Rsirsc Motor: 11 kW Tekanan: dapat diatur hingga maksimal 250 bar Kapasitas aliran hingga maksimal 220 kg/jam Briket: 150x60 mm Dimensi mesin press: sekitar 2200x3000x1920 mm (PxLxT) Dimensi panel kontrol: 500x1250x2120 mm (PxLxT) Berat sekitar 3000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2025, Requirements: - Material must be free-flowing (less than 18 mm) - Material must be pure, with ash content less than 1% ATRO Caution with: sand, stones, and minerals - Material is pressed using press jaws - Material must be dry, max. 15% ATRO New: Innovative combination of briquette and pellet Options at extra cost: Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overbelt magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - All types of control system integration - Semi-automatic packaging technology + 24h operation possible Fsdpofbb Arsfx Airjgc + Compact design + High energy efficiency thanks to innovative hydraulics + Briquette density up to ≥ 1 kg/l possible *Details after testing Function: The machine features a silo with agitator. In each of the 4 corners of the storage silo, there is a vertical screw which compresses the material downwards into the press chamber. The machine operates with two cylinders, each pressing in two directions (either when the cylinder moves forward or retracts). This results in 4 briquette outlets, each with 6 individual briquettes. *ideal for automatic feeding of the boiler Format Ø 30 mm Throughput rate up to a maximum of 310 kg/h Motor power: approx. 27 kW total Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tonnes Your benefits: Compact briquette/pellet format enables fuel supply to industrial combustion systems via screw feeders Fully automatic 24/7 operation possible High energy efficiency Briquettes/pellets with consistently high quality & density For automatic feeding into industrial combustion systems Small to medium quantities of wood shavings, which are produced in various sectors of the processing industry (mainly wood, biomass, and more), can be optimally compacted. The small Ø 30mm format offers an attractive alternative. Unlike our traditional briquettes, these can be automatically fed into industrial combustion systems. In addition to wood, various other materials can also be processed without issue (various biomass and agricultural residuals).

Kondisi: sangat baik (bekas), de_1 Fgsdpfsy Tm Afsx Airjc

Kondisi: baik (bekas), Tahun pembuatan: 2004, nomor mesin/kendaraan: 1855680, Fungsionalitas: berfungsi sepenuhnya, daya: 4 kW (5,44 hp), frekuensi input: 50 Hz, gaya penekanan: 80 t, lebar meja: 800 mm, panjang meja: 1.400 mm, tekanan kerja: 270 batang, Hersteller: Joos Modell: HP-S 80 Baujahr: 2004 Presskraft: 800 kN Drei-Kolben-Ausführung Geeignet für Holzverarbeitung und industrielle Anwendungen Fgjdpfx Aijrp D Eaorec Gut gepflegt und in einwandfreiem Zustand Zuvor im gewerblichen Einsatz verwendet, zuverlässig und langlebig. Trotz Staubablagerungen arbeitet diese Hydraulikpresse weiterhin zuverlässig. Kontaktieren Sie uns noch heute, um einen Besichtigungstermin zu vereinbaren oder weitere Informationen zu erhalten.

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 2.200 mm, lebar benda kerja (maks.): 800 mm, tinggi benda kerja (maks.): 40 mm, panjang langkah: 150 mm, nomor mesin/kendaraan: 52850199, translation_de_2024-06-18_1 Fgedoy Tn R Rspfx Airsc

Kondisi: baik (bekas), Tahun pembuatan: 2006, Eine vielseitige 6-Stationen-Spannmaschine, speziell ausgelegt für das Verleimen von Massivholzkanten und -flächen. Der Spannrahmen (Clamp Carrier) eignet sich ideal zur Herstellung verschiedenster Komponenten wie Platten, Tischplatten, Blockverleimungen, Tischlerwaren und Treppenteilen. Die patentierten 'Equaliser'-Spannarme bieten zahlreiche wichtige Merkmale, die bei anderen mechanischen Spannsystemen nicht zu finden sind und gewährleisten eine hochwertige Leimfuge. Serienmäßig ist die Maschine ausgestattet mit einem hydraulischen Spannanzieher/-löser, einem pneumatischen Werkstückrichter und hydraulischer Drehung. Fsdperu Evgefx Airjgc Ausstattung: - 302er Spannarme mit 915 mm (36") maximaler Öffnungsweite und 95 mm (3,5") hohen Backen - 2 x 80S Schwerlast-Hydraulikantriebe für die Drehung - 1 x 80V halbautomatischer hydraulischer Spannanzieher (Hydraulikaggregat, 3-Phasen-Anschluss) - 1 x 80D pneumatischer Werkstück-Flächendrücker - Pneumatischer Vor-/Rücklauf der vorderen Anlage - CE-konforme Sicherheitseinrichtung (Schutzumwehrung) Baujahr: 2006, CE zertifiziert

Kondisi: baru, Tahun pembuatan: 2023, Press area: 3000 mm x 1800 mm Fjdpsiwfhwefx Airjgc Number of manual hydraulic cylinders, vertical: 4 Number of manual hydraulic cylinders, horizontal: 2 Pressing force: 1500 kg Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, Panjang penutup lipat: maks. 3000 mm Fgsdpfxoxuf Dze Airoc Lebar penutup lipat: maks. 700 mm Tekanan vertikal dapat diatur: hingga 8000 kg Tekanan horizontal: 2500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, berat keseluruhan: 500 kg, daya: 3 kW (4,08 hp), PLC control with touch panel Briquetting capacity 80 - 100 kg/h Conveyor screw diameter 130 mm Connection (internal) diameter 160 mm Fedpfxewhv Imj Airogc Chip briquette diameter 60 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1541, lebar total: 2.000 mm, tinggi total: 2.500 mm, panjang total: 30.000 mm, diameter briket: 90 mm, berat keseluruhan: 6.000 kg, Perlengkapan: Pelat tipe tersedia, Penandaan CE, Lini produksi lengkap untuk briket silinder Ø 90 mm. Lini ini terdiri dari mesin press briket Di Più BRIK MB90, konveyor masuk untuk serbuk gergaji, kolom pendingin briket, pemotong briket, konveyor penyusun briket, terowongan penyusut (mesin pembungkus), dan konveyor rol keluar. Fgedpfjy U D Uuex Airoc

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 985-7, Fungsionalitas: berfungsi sepenuhnya, daya: 22 kW (29,91 hp), tegangan masuk: 400 V, arus masuk: 30 A, frekuensi input: 50 Hz, berat keseluruhan: 2.500 kg, 1 Fgsdpoy Uibtofx Airjc

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, panjang total: 2.500 mm, lebar total: 600 mm, tinggi total: 1.350 mm, berat keseluruhan: 1.200 kg, 1 Fedpfxszaku De Airjgc

Kondisi: sangat baik (bekas), panjang kerja 3300 mm tinggi kerja 1800 mm 3 silinder vertikal 2 silinder horizontal mode operasi manual Fgedpfoy Uuwajx Airjc

Kondisi: baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 76 / 2011, diameter briket: 75 mm, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tegangan masuk: 380 V, We offer a COMAFER DIN 250 briquetting press in good condition, year of manufacture: 2011. Features: - Cylinder with closed-circuit oil cooling and cooler - Capacity: 100–250 kg/h, depending on material - Briquette diameter: 75 mm - Cylindrical casing (ø1200) with inspection door - Additional ring (sleeve) ø1200 / h930 - Pressing force approx. 1100 kg/cm² Fsdpfxjy Uihaj Airsgc - 2 cylinders; briquette cylinder ø 200 mm - Pump motor (11 kW / 15 HP, 380 V, 50 Hz) - Monoblock, self-centering, round vice without clamping rods - Electrical control panel with PLC, automatic and manual cycle - Shutdown mechanism with open vice and vice pressure gauge - Digital thermostat for oil temperature control, level switch to prevent oil leakage - Closed-circuit oil cooler system (air/oil) - Closed-circuit cooling for chuck (580 mm x 550 mm x 908, weight 56 kg) - Tapping head for long briquettes, uniform briquette length, CE compliant - Dimensions: 2100 mm x 1350 mm x 1540 mm (height), weight: 1600 kg If you have any questions or need further information, please send us a message. Telephone information available in Hungarian only.

Kondisi: bekas, menge20-gewicht0-5kg-materialhss Fjdpey Spv Sjfx Airogc

Kondisi: sangat baik (bekas), Nomor katalognya 7811 DATA TEKNIS - Gaya penekanan: hidrolik - Bentuk briket: bulat - Diameter briket: 60 mm - Diameter tangki: 990 mm - Kapasitas: sekitar 70 kg/jam - Operasi mesin otomatis Fgjdpfsy Rrn Iex Airoc - Jendela inspeksi - Motor: 5,59 kW - Tekanan kerja maksimum: 150 bar - Dimensi (p/l/t): 1700x1350x1550 mm - Berat: sekitar 1100 kg KEUNGGULAN – Produksi Italia – Mesin briket bekas – Jendela inspeksi – Kondisi sangat baik Harga netto: 35.900 PLN Harga netto: 8.550 EUR tergantung kurs 4,2 EUR (Harga dapat berubah tergantung fluktuasi lebih lanjut)

Kondisi: sangat baik (bekas), NOMOR KATALOG 7993 DATA TEKNIS - bidang muat: 2 - penekan samping yang dapat disetel manual: 2x4 unit - penekan vertikal pneumatik: 2x4 unit - panjang maksimum elemen yang direkatkan: 2500 mm - tinggi maksimum elemen yang direkatkan: 1330 mm - ketebalan maksimum elemen yang direkatkan: 110 mm - panduan untuk merekatkan elemen tipis - dimensi (P/L/T): 3000x1350x2000 mm - berat: 900 kg KEUNGGULAN – dua area kerja – panjang perekat 2500 mm – silinder pneumatik – panduan untuk merekatkan elemen tipis – tidak dicat – mobil – dilengkapi roda – press bekas, kondisi sangat baik Fedpfx Aey Rq Imsirogc Harga netto: 13.900 PLN Harga netto: 3.300 EUR Harga netto dihitung dengan kurs 4,2 PLN/EUR (dalam hal fluktuasi kurs yang signifikan, harga dapat berubah)