Beli Duo Sisi Pemformatan Dan Edge Banding bekas (12.431)

Kondisi: bekas, Tahun pembuatan: 1989, 1 Hedpozk N Ehsfx Aa Dsnp

Kondisi: bekas, Tahun pembuatan: 2013, Mesin Bekas Tahun Pembuatan: 2013 Peralatan dan Data Teknis: - Pengontrol dengan layar sentuh 15 inci - Unit pemotong tepi dengan 2 kepala pemotong - Pengumpan tepi - Sistem pengaplikasian lem GluJet 301: 2,3 kW, penyesuaian tinggi lem otomatis, nozel sensor - Unit pencetak: pneumatik - Unit pemotong: pneumatik - Mata pemotong berlian Kiri + Kanan: dengan teknologi CM - Unit penyalin tepi dengan mata pemotong berlian - Bilah penyerut permukaan - Unit penghalus - Penyangga benda kerja yang dapat ditarik - Penyesuaian jembatan penekan motorik dengan sumbu NC melalui pengontrol program Hodpszk N Dkefx Aa Djnp - Tudung penghisap untuk unit pemotong - Unit pemotong multifungsi: MOT 4 - Roda sensor vertikal: pneumatik - Perangkat putar pneumatik untuk unit pemotong MOT 4 - Unit penyerut MOT 2 dengan kotak penampung serpihan - Perangkat penyemprot untuk area masuk dan keluar - Panjang benda kerja minimum: 160 mm - Ketebalan benda kerja: 6-60 mm - Ketebalan tepi: 0,4-6 mm - Kecepatan umpan: 10 m/menit - Panjang keseluruhan: 4930 mm - Berat: 1420 kg Ketersediaan: dalam waktu dekat Lokasi: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 1990, Mesin bekas Tahun pembuatan: 1990 Perlengkapan dan data teknis: - Pengumpan tepi otomatis - Sistem lem dengan patron - Unit penekan 4 rol - Agregat gergaji potong - Agregat frais sejajar - Agregat frais kombinasi (sejajar/chamfer/radius) - Pisau tarik radius - Agregat pemoles - Ketebalan edging: 0,3 - 20 mm - Ketinggian edging maks.: 66 mm - Panjang edging min.: 200 mm - Kecepatan umpan: 8/16 atau 12/24 m/menit Hodozk N Amspfx Aa Denp Ketersediaan: segera Lokasi stok: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 2008, Mesin Bekas Tahun Pembuatan 2008 Peralatan dan Data Teknis: - Unit pelapis lem tipe bulat - dengan 2 unit pelapis lem tambahan untuk pemrosesan PUR - Unit pengumpan dengan majalah tepi otomatis - Zona penekan dengan beberapa rol penekan - Pemotongan tepi akhir: 2 unit gergaji bermotor untuk pemotongan ujung/tepi - Router atas/bawah: 2 unit router dengan roda penjiplak untuk radius atau chamfer - Mata pisau penarikan radius: dikendalikan secara pneumatis, penyelesaian akhir radius - Mata pisau penarikan permukaan: untuk menghaluskan permukaan tepi - Unit pemoles: 2 cakram pemoles dengan motor untuk penyelesaian akhir - Sistem penyemprotan Riepe - Kontrol: PLC dengan panel kontrol - Penggantian penggerak frekuensi pengumpan oleh Ott pada tahun 2022 - Kecepatan pengumpan sekitar 10-12 m/menit - Ketebalan benda kerja hingga 52 mm - Ketebalan tepi 0,3 - 12 mm - Catu daya 3x 400 V AC, 50 Hz - Daya nominal 12,7 kW - Arus nominal 30,5 A - Tegangan kontrol 24 V DC - Sekering maks. 35 A (kabel penghubung 5x 6 mm²) Dimensi mesin: sekitar 6120x840x1385 mm Berat mesin sekitar 3.000 kg Ketersediaan: segera Hsdszk Nw Dopfx Aa Denp Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Hnedpjzk Nwwsfx Aa Dop Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: bekas, Tahun pembuatan: 1983, Mesin bekas Tahun pembuatan: 1983 untuk material edging pra-lapis Material edging hingga 1,3 mm dengan pemotongan rol dengan pemotongan rata dengan pisau Hodszk Ntlspfx Aa Djnp dengan milling rata/serong atas/bawah dengan motor HF Lokasi: Röllbach Ketersediaan: jangka pendek

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Features and technical data: - Equipped with a new glue application system - Infeed fence, manually adjustable - Milling unit 1961 - Edge feed unit 1903 Hodpozk Nlhjfx Aa Dsnp - Glue application station 1906 with sensing nozzle - Pressing unit 1816, pneumatic - End trimming unit 1822 - Milling unit 1942 M (radius, chamfer, flush trimming) - Complete air nozzle - Scraper station 1929 - Chip collection box - Area scraper 1964 - Extraction hood set - Complete safety covers - Total length: 5,291 mm - Workpiece thickness: min. 6 / max. 50 mm - Edge material thickness depending on configuration: 0.4–5 mm - Edge height max.: 55 mm - Edge strip length: min. 350 mm - Edge overhang/height per side: max. 3 mm - Workpiece width: min. 60 mm - Workpiece length: min. 180 mm - Feed speed: 12.5 m/min - Extraction: - Jointing milling unit: 900 m³/h - Milling unit: 280 m³/h - Scraper station: 280 m³/h - Static negative pressure: - Jointing milling unit: 1,490 Pa - Milling unit: 1,650 Pa - Minimum air velocity: 20 m/sec - Jointing milling unit connection: 70 mm - Scraper connection: 70 mm - Compressed air: 6 bar Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2011, Mesin Bekas Tahun Pembuatan: 2011 Kondisi: Mesin telah diperbaiki dan dirawat sepenuhnya Peralatan dan Data Teknis: Kecepatan umpan dapat disesuaikan secara bertahap, 10-18 m/menit Sistem kontrol Edge Control 19 dengan layar warna sentuh 18,5 inci Hodszk N Eujpfx Aa Dsnp Unit pemotong tepi Penyalur tepi Stasiun pengaplikasian lem dengan kartrid, nosel yang dapat menyesuaikan secara otomatis Unit pencetak Unit pemotong Unit pemotong multifungsi Unit pemotong salin Unit pemotong radius Pisau serut permukaan Proses penyelesaian Ketebalan benda kerja: 6 - 60 mm Ketebalan tepi: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Panjang benda kerja terpendek: 180 mm Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: dalam waktu dekat

Kondisi: bekas, Tahun pembuatan: 1992, Mesin bekas Tahun pembuatan: 1992 Tinggi benda kerja maks. sekitar 40 mm Panjang benda kerja min. sekitar 250 mm Lebar benda kerja min. sekitar 70 mm Kecepatan pengumpan sekitar 11 m/menit Hnodpfjzk N Ebox Aa Dep Siap operasi dalam sekitar 4-5 menit Daya terpasang sekitar 11 kW Dengan tangki lem pemanas cepat Pemotongan roll secara pneumatik hingga 3 mm Dengan gergaji potong hingga ketebalan pinggiran 5 mm Dengan stasiun fraisasi, opsional dilengkapi dengan pisau frais sisip kombinasi untuk pemrosesan radius, lurus, dan chamfer Penopang yang bisa dilipat dan dapat ditarik ke arah depan Dengan sasis P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim

Kondisi: bekas, Tahun pembuatan: 1998, Used machine Year of manufacture: 1998 Features and Technical Data: At 5500 mm in length, the Quadromat is the most compact edge processing machine that enables complete processing of edge materials thanks to its integrated workpiece return system. Not only are the longitudinal edges milled inside the machine, but also the end edges are copied, thus completing the processing. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - Equipped with PLC control, allows up to 20 processing programs Workpiece dimensions: - Minimum width: 60–80 mm (depending on edging material) - Minimum length: 150 mm - Workpiece thickness: 10–50 mm - Edging thickness: 0.4–12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min - With 2 joint trimming motors - With multifunctional milling unit (flush, chamfer, radius) - With scraper blade Hodozk Nr Uspfx Aa Denp - With cross-cut saw - With 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection: 7–10 bar Extraction port: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2018, Mesin Bekas Tahun Pembuatan: 2018 Fitur Khusus: Mesin dengan tinggi penyesuaian maksimal 100 mm! Kondisi: Telah diperiksa oleh Lange Maschinenbau Peralatan dan Data Teknis: - Meja mesin dengan 13 rol untuk pengumpanan benda kerja yang lebih baik - Pengumpan tepi, bekerja sinkron dengan pengumpan sabuk - Ketebalan tepi dapat disesuaikan melalui penghitung digital - Pemisahan rol pneumatik dengan pisau (untuk tepi yang dapat dipotong) - Tiga rol penekan - Pengumpan sabuk: - 0,25 kW - Panjang sekitar 1250 mm - Kecepatan sekitar 6,0 m/menit - Sabuk bergerigi lebar 50 mm dengan lapisan karet tebal yang melindungi benda kerja - Penghitung digital untuk pengaturan ketinggian - Aplikasi lem langsung ke benda kerja: Wadah lem kedap, dengan cadangan lem dari bawah dan waktu pemanasan cepat setelah mesin berhenti - Unit pemotong tepi: - Untuk tepi depan dan belakang benda kerja - Pemindaian otomatis pada benda kerja - Pemotongan pneumatik dengan pisau untuk tepi yang dapat dipotong - Unit pemotong tepi - Dengan pemindaian vertikal dan pemandu horizontal - Pengaturan yang dapat direproduksi menggunakan penghitung digital - 2 motor frekuensi tinggi 0,4 kW yang bertenaga - Dapat diatur secara variabel dari 4000 hingga 18000 RPM - Mata potong Ø 70mm, Z4, Radius 2mm/15° - Sambungan penghisap debu sentral Ø 100 mm - 2 tudung penghisap serpihan dengan selang Ø 60 mm - Pengaturan ketinggian otomatis dari pemotong atas dengan pengumpan sabuk - Penopang benda kerja dengan panjang sekitar 1800 mm - Rel penopang benda kerja, dapat ditarik sekitar 300 mm - Pelat film yang dapat diputar Ø: 800mm - Lebar benda kerja: min. sekitar 80 mm - Ketebalan benda kerja: 10 ? 100 mm - Panjang benda kerja: min. sekitar 220 mm - Ketebalan tepi: 0,4 ? 2,0 mm - Pemisahan rol: maks. 1,0 x 55 mm, 2 x 45 mm - Daya pemanas wadah lem: 2,7 kW - Waktu pemanasan: sekitar 10 menit - Tinggi kerja: sekitar 880 mm - Koneksi listrik: 400V, 50 Hz, 3 Fase + N - Total koneksi: 3,8 kW - Koneksi pneumatik: 6 Bar Hnsdpfezk Nmrox Aa Dop Dimensi (tanpa pelat film): sekitar 1800 x 700 x 1300 mm Berat: sekitar 260 kg Ketersediaan: dalam waktu dekat Lokasi penyimpanan: Flörsheim

Kondisi: baik (bekas), Tahun pembuatan: 1999, ts01 Hnsdpfx Aaezafppj Dop

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, daya: 16 kW (21,75 hp), tegangan masuk: 400 V, jenis arus masuk: tiga fasa, tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 6 mm, kecepatan pemakanan sumbu X: 11 m/menit, panjang total: 4.150 mm, berat keseluruhan: 1.350 kg, tahun perombakan terakhir: 2026, Perlengkapan: Penandaan CE, dokumentasi / manual, Brandt-Homag KDF 220 Highflex mesin edge banding, tahun pembuatan 2012 Dari bengkel pertukangan kecil Inspeksi terakhir: 20.03.2026 Tipe: KDF 220 Hnedpfxezdb Ivo Aa Dop Nomor mesin: 0-261-20-6136 Nomor skema listrik: 0-261-20-6136 Tahun pembuatan: 2012 Tegangan suplai: 400Y/230 Unit dikendalikan dari tampilan Unit prapemangkasan: 2 x 2,2 KW Unit gergaji potong: 2 x 0,18 KW Unit milling rata: 2 x 0,27 KW Unit milling profil: 2 x 0,35 KW WD 40 Fungsi tambahan: dasar konstruksi Pisau serut radius Pisau serut permukaan Ketebalan tepian: 0,4 - 6 mm Ketebalan benda kerja: 8-60 mm Kecepatan maju: 11 m/menit Daya total: 16 KW Panjang: 4150 mm Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, max. edge banding thickness 0.2 - 15 mm Feed speed 12 / 18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edging Granulate quick-heating tank End trimming shear: 0.2 - 3.0 mm Flush milling unit Radius milling unit Operation via selector switch / push buttons Extendable roller support Acoustic enclosure Machine length 3,800 mm Note on used machines: Hedjfbr S Rjpfx Aa Denp • Technical data is subject to errors and prior sale. • Prices quoted are ex location - free loading! • The machine has been cleaned and functionally tested. • All machines are sold "as seen" without any guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at our premises. • Special agreements are only valid if made in writing. (We will only respond to enquiries that include your address and telephone number!)

Kondisi: bekas, Tahun pembuatan: 1985, Edge thickness 0.4 - 12 mm Workpiece thickness 10 - 55 mm Workpiece length min. 160 mm Workpiece width min. 65 mm Feed rate 13 m/min Pneumatic connection 7 bar Total length 5220 mm Weight 1950 kg Heated glue pot with Quickmelt hot-melt adhesive granulate Glue roller rotation for synchronous and counter rotation Edge magazine for PVC roll goods and strip edging Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at the machine infeed All units are track-controlled – i.e., no workpiece-controlled limit switches required End trimming Milling combination: bevel milling/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with bevel cutter) with pneumatic adjustment Scraper – with pneumatic adjustment Buffing Central lubrication for chain track Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Hedpfxoc Tmygo Aa Donp Edge monitoring with error indication Infrared heating element CE compliant Note regarding used machines: • Technical data subject to change and prior sale. • Prices stated are ex works – loading included! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty or guarantee claims. Buyers are welcome to inspect machines at their current location. • Special agreements are only valid if made in writing. (Inquiries will only be answered if you provide your address and telephone number!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Ketebalan tepi: 0,2 - 12 mm Dimensi benda kerja: Lebar minimal 70 mm Tinggi minimal / maksimal 8 / 42 mm Panjang minimal 160 mm (tepi strip) Hsdpfx Aaehy Tlro Djnp Panjang minimal 60 mm (dari gulungan) Kecepatan umpan: 12 m/menit Rol pengaplikasi lem Tinggi kerja 880 mm Udara bertekanan 6 bar, 1/4 inci Sambungan saluran pembuangan debu DM 160 mm Dimensi mesin P x L x T = 5600 x 950 x 1300 mm Berat: sekitar 2200 kg Daya yang dibutuhkan: sekitar 11,5 kW, 400 V, 50 Hz Peralatan: - Sistem penekanan ganda dengan pengaturan ketinggian elektrik - Majalah otomatis untuk tepi gulungan hingga 800 mm DM - Gunting pneumatik untuk tepi strip hingga 3 mm - Penggaris masuk otomatis Unit pemotongan awal dengan 2 motor frekuensi tinggi 1,5 kW, 12000 rpm Gergaji pemotong ujung ganda - 2 motor frekuensi tinggi 0,2 kW, 12.000 rpm 2 posisi otomatis = 0 + 3 derajat Unit pemotongan sisi dengan 2 motor frekuensi tinggi 0,7 kW, 12.000 rpm Unit pemotongan radius - dengan 2 motor frekuensi tinggi 0,3 kW, 12.000 rpm Unit pembulatan sudut AR2 - dengan 2 motor frekuensi tinggi, 0,3 kW, 12000 rpm, sistem sentuh dua tahap Pisau penyerut permukaan Catatan untuk mesin bekas: • Kesalahan dalam spesifikasi teknis dan kemungkinan penjualan dapat terjadi. • Harga yang tertera adalah harga pengambilan di lokasi – bebas biaya pemuatan! • Mesin telah dibersihkan dan diuji fungsinya. • Semua mesin dijual sebagaimana adanya setelah diperiksa tanpa jaminan apa pun. • Pembeli berhak untuk memeriksa mesin di lokasi. • Perjanjian khusus hanya mungkin dilakukan secara tertulis. (Permintaan hanya akan kami jawab jika menyertakan alamat dan nomor telepon Anda!)

Kondisi: baru, The best-selling edge banding machine in its class with an unrivaled price-performance ratio. SCM Edge Banding Machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, featuring a new corner rounding unit. Edge thickness, roll material: 0.4 - 3 mm Max. edge thickness, strip material: 5 mm Min. – max. workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9,000 rpm Glue pot: 0.18 kW, 0.8 kg End trimming saw unit: 0.19 kW, 12,000 rpm Flush and radius trimming unit: 2 × 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Flat scraper Grooving unit: 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush and radius trimming unit with tracing rollers Heated infeed fence Glue pot quick-change device Hjdpfx Aaec S Di Re Djnp ...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Edge thickness: 0.2 – 12 mm Workpiece thickness: 8 – 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing cutter unit: 2 x 1.5 kW, servo-controlled End trimming unit: 2 x 0.3 kW Flush trimming unit: 2 x 0.7 kW, single-sided tracing Fine trimming unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine radius trimming unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatic feed Surface scraper unit, with fine-adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spray unit (2 x separating agent, 1 x sliding agent, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 – 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Hnodpelc Ewiefx Aa Djp Weight approx.: 2,900 kg

Kondisi: bekas, Tahun pembuatan: 2016, Industrial Automatic Edgebanding Machine SOLUTION XD Hnjdpfsxy Tm Isx Aa Dop MAIN FEATURES “E TOUCH” CONTROL WITH AUTOMATIC PROGRAMMING: ONE “TOUCH” IS ENOUGH TO OPERATE THE MACHINE Standard pressure unit with drive belt for optimum panel guidance Edgebanding of coil material, strip edges, and solid wood edges GENERAL FEATURES Single-sided edgebander in left-hand configuration for edgebanding coils and strips using all common hot-melt adhesives. The base frame consists of a robust welded steel frame with increased rigidity, providing optimal support for housing the processing units. The top pressure is made of thick-walled steel profile with a double trapezoidal drive belt, which is positioned automatically according to the panel thickness. Height adjustment is displayed both on the top pressure and on the operator’s console. Manual workpiece feed system with generously sized working line and enlarged support surface for easy introduction of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling unit. Machining units mounted on the pressure beam and mechanically linked to guarantee automatic adjustment when changing panel thickness. Lower processing units are fixed to the machine base or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency converters (inverters); each unit has its own inverter for optimal flexibility and improved production times. Protective hood for all units located after the gluing station, with polycarbonate windows providing a clear view of the processing units during operation. Interior lighting of the hood, equipped with sound-absorbing material to reduce noise emissions during operation. Spacer at the infeed fence allows correct panel loading. The spacing is automatically adjusted according to the selected feed speed. Swiveling control panel positioned at the infeed area, adjustable for ergonomic operation. Electrical system complies with current regulations. Electrical components are housed in a metal cabinet mounted to the machine frame with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide plates made of rubberized nylon, for optimal guidance and high durability. The chain runs on two guides made of hardened and ground steel—one round, one flat—to ensure straight panel feed and to prevent lateral deviation. Automatic lubrication of the chain, with lubricant amount controlled by the system according to panels processed. External roller conveyor running the entire length of the machine, with an extendable opening system (up to 650 mm) for panels with maximum width of 1200 mm. E-TOUCH PC control system for quick and easy handling of main functions including: – Processing programs in Just-in-Time mode – Option to manage via parts lists – Option for management through ...

Kondisi: baru, Tahun pembuatan: 2025, Edgebanding unit: Yes Edge thickness: up to 3mm Workpiece thickness: from 8mm to 50mm Minimum workpiece width: 110mm Glue pot: Granulate, quick-change container End trimming saw: yes End trimming / flush cutting: yes Milling station: Chamfer / radius Corner copying: yes Hedpfok Eai Ujx Aa Djnp Flat scraper: yes Radius scraper: yes Buffing unit: yes Anti-adhesive spray unit: yes Manual infeed fence adjustment Manual workpiece thickness adjustment Connected load: 5 kW Machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 34 kW (46,23 hp), tegangan masuk: 380 V, Perlengkapan: dokumentasi / manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure shift-free transport. Panel conveyor Long, heat-treated semicircular guide rail allows perfect contact with the conveyor, with zero play. The conveyor is fixed to the machine frame for stability when handling wide panels, with a maximum extension width of 600 mm. Narrow parts package Feed package for narrow components, ensuring minimum edge width of 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43 mm height. Two pneumatically controlled motors (2 x 3.7 kW), intermittent edge milling on the panel. Panel preheating unit x2 Heats the workpiece edge so the adhesive melts properly—ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel end for better bonding. Edge band support x2 Large support, optimally positioned for easy feeding and long service life. Edge band cutting unit x2 Pneumatically operated guillotine with electric switch for precise end trimming of the edge band. Premelt glue application unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps adhesive fresh. Automatic glue pumping + 25kg tank Glue is automatically pumped to the upper reservoir when levels fall below the sensor. Edge band cutting unit Pneumatically operated guillotine with electric switch for precise trimming at the end of the edge band. Hedpfxoy Rlbno Aa Denp 2 sets of pressure rollers One 100 mm pre-press roller combined with four trailing rollers ensure secure pressing. Lubrication system Lubrication pump for daily maintenance, greasing the guide rail with a simple lever action. End trimming unit Linear guide structure at 45°, with 2 motors of 0.35 kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is virtually zero. R1.5 diamond knives. Corner rounding unit Designed for rounding the edges of the edge band at ends and along the length to achieve circular radius R. 2 scraping units with pneumatic movement Two sets, each with different radius knives (one set R1.5, the other R1). Extraction system Each unit has an independent extraction port (125 mm), total 6 ports. Glue scraping and cleaning unit (straight) Removes edge band debris, followed by straight scraping to remove adhesive residue from the top and bottom surfaces. Spraying unit – cleaning agent Separation agent applied before pre-milling prevents glue from sticking to the panel surface. 2 sets of polishing units Designed for two glue colors (dark and light) to avoid contamination. Solution for narrow parts Allows processing of workpieces: 120x120 mm (all 4 sides), 200x40 mm (long side), 40x200 mm (short side). Additional conveyor roller Solid support for large or inline panels. PUR device 2KG/20KG – 6,500 EUR + VAT Temperature control system with touch screen and even heating. Polyurethane (PUR) adhesive technology ensures superior bonding performance.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de Hedpfxjy Sk T Ej Aa Denp

Kondisi: bekas, Lokasi gudang: Sonnefeld Hsdpfjway Dcox Aa Donp

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Hnedpfx Aajvvkd Tj Djp

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) Hnodpfxovvkfde Aa Dop With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.