Beli Habersang Primus 60 bekas (21.156)

Kondisi: baru, Our SAPI pressure blasting unit, type "Mammut," with a 60-liter tank capacity, is suitable for all standard blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the built-in pressure regulator. A water separator is also permanently installed on the blasting unit, which removes moisture from the compressed air and prevents clumping of the blasting media due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed Dkodpfewc Afhjx Aaqol - SAPI safety shut-off Technical data of pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Fixed pipework 1" internal and external - Metal cone covered with rubber and rubber gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 litres - Total height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off - Fastest switching times on and off, while complying with trade association regulations (VBG 48) - The pressure can be precisely set before the actual blasting process, infinitely adjustable from 0.1 to 12.0 bar - Reduced media consumption, as the pressure vessel remains permanently pressurized, preventing unnecessary media run-on - Upon restarting, full blasting pressure is immediately available at the nozzle without needing to build up slowly. This ensures significantly lower media consumption and considerably less wear on the blasting hose - No condensation forms in the vessel, as the tank remains continuously pressurised and is not repeatedly vented for each start and stop. This method also offers other advantages as follows: - Optimal blasting media dosing with hardened fine dosing valve - Reduced compressed air requirement, resulting in significantly lower fuel (diesel) consumption - One-man operation, as blasting pressure is constantly displayed by the vessel pressure and can easily be adjusted via the manometer without starting beforehand - No failure-prone components such as control valves, membranes or seals, making it low-maintenance and reliable. Only the blasting hose in the safety shut-off needs to be checked and replaced if necessary.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Schickert bread slicing machine Dkjdpfxeghwi Ds Aaqol Circular blade, Teflon-coated Extra-long sides for 2 loaves or a single long loaf up to 70 cm Stainless steel construction Mobile DGUV V3 inspected Connection: 400V, 0.75 kW, 16A CEE plug Used machine, cleaned and tested Without stainless steel table, or available for an additional price upon request Immediately ready for operation Refurbished Connection: 16A

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 21.200 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 190332, gaya penjepit: 1.000 kN, berat injeksi: 15 g, gaya ejektor: 66.000 N, lintasan ejektor: 225 mm, panjang pelat: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high wear resistance, fixed) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control: Selogica Clamping unit: hydraulic Operating hours: 21,200 h Dkodpoy Hki Ajfx Aaqol EQUIPMENT 1 vertical injection unit, mounted on supports instead of on clamping platens for the second injection unit, manually operated, working position adjustable between 70 and 250 mm 2 x core pullers Open nozzle 15 mm, wear-resistant, without heating band (1st injection unit 150) Technology Level 2 – servo-controlled hydraulic system with two variable-displacement pumps Technology Level 3 hydraulic system with three variable-displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line in 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the third injection unit for VE 906/00 – injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm, wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/Manual

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.275 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 02/2023, panjang total: 13.550 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2023, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: baru, Wide belt sander for calibration and fine sanding Working width mm: 1,100 Min./Max. working height mm: 4/170 Abrasive belt width mm: 1,115 Abrasive belt length mm: 2,150 Gear motor kW: 2.2 Feed speed m/min: variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10" touch screen control panel "eye-S" 1st unit: steel roller 2nd unit: rubber-coated calibration roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/ rubber-coated sanding roller 35SH Motor power 1st unit kW: 18.5 Motor power 2nd & 3rd unit kW: 18.5 Dkodpfxeitvkuj Aaqsl Version "B" for RRCS with: pneumatic on/off for 1st unit pneumatic on/off for 2nd unit pneumatic on/off for 3rd unit “MESAR” elastic segmented sanding pad pneumatic on/off for sanding pad unit electronic adjustment of working height SPECIAL PRICE! IMMEDIATELY AVAILABLE!

Kondisi: bekas, nomor mesin/kendaraan: 008527, de-1 Dksdpoy Nx Ufofx Aaqel

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 3.465 h, kapasitas angkut: 3.000 kg, tinggi angkat: 4.890 mm, pengangkatan bebas: 1.550 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.275 mm, panjang garpu: 1.200 mm, jenis penggerak: Elektro, Elektrik Forklift 4 Roda Tipe Mast: Triplex Transmisi: Otomatis Kondisi: Direkondisi ulang tanpa garansi Kondisi Teknis: sangat baik Jenis ban depan: Non Marking Kondisi ban depan: 80 - 100% Jenis ban belakang: Non Marking Kondisi ban belakang: 60 - 80% Baterai Volt: 80V Kapasitas Baterai: 620Ah Tahun pembuatan baterai: 2023 Deskripsi: Harga sudah termasuk pemeriksaan UVV baru, pengecatan sangat bagus (bekas unit sewa Still), baterai tahun 2023 direkondisi dengan Power Cycler termasuk tes Kappa 87% (lihat gambar terakhir), charger cocok dengan colokan, kami siap membantu pengiriman dengan biaya terjangkau. Sewa beli dimungkinkan! Side shifter, katup ke-3, katup ke-4, lampu kerja belakang, lampu kerja depan, pemanas, kabin penuh, full free lift, sertifikat CE, lampu keselamatan. Dkedpfjyvl Huox Aaqel

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS DENGAN KOLUM BERGERAK PERGERAKAN LONGITUDINAL: 6000 mm PERGERAKAN TRANSVERSAL: 1500 mm PERGERAKAN VERTIKAL: 2500 mm GERAK CEPAT L-T-V: 35 m/menit Dkedpfox Ru Azox Aaqol SPINDEL: 337-5000 rpm; 42 kW; 1180 Nm MEJA KERJA: 300 x 2500 x 7000 mm KEPALA: ISO 50 ; POSISI MILLESIMAL ; SUMBU A/B OTOMATIS MAGAZIN ALAT: PICK-UP; 12 POSISI UNIT KONTROL: HEIDENHAIN TNC 640 PENDINGIN TEKANAN TINGGI: 20 Bar CATATAN: PERGANTIAN KEPALA OTOMATIS; UDARA BERTEKANAN DI DALAM ALAT; RTCP; PERANGKAT LUNAK AUTOCAL UNTUK KALIBRASI OTOMATIS

Kondisi: siap digunakan (bekas), Deutronic DX 3000 / 3-CAN-60-DIV catu daya built-in Kondisi: 1 Nomor seri: 92037202009 / Input: 400-500 V~ / 45-65Hz Output: 0-60 VDC 0-50 A, bekas, kondisi terawat dengan baik, 100% berfungsi, dikirim sesuai foto Dedpfsy Rcktjx Aaqjkl

Kondisi: siap digunakan (bekas), Deutronic DX 3000 / 3-CAN-60-DIV catu daya built-in Kondisi: 1 Nomor seri: 9122080016 / Input: 400-500 V~ / 45-65Hz Output: 0-60 VDC 0-50 A, bekas, kondisi terawat baik, 100% berfungsi, lingkup pengiriman sesuai foto. Djdpfjy Rckmjx Aaqekl

Kondisi: baik (bekas), live centre, revolving centre, live Morse taper, live centre point, live lathe centre, centre cone - Live centre point: shaft-mounted - Taper: MT3 - Dimensions: Ø 60 x 155 mm Dkodpfx Aaom U A Exeqel - Weight: 1.2 kg

Kondisi: bekas, CNC vertical machining center FEHLMANN type PICOMAX 60 CNC control HEIDENHAIN TNC 426 Serial No. 14599641 Year of manufacture: 1999 Travel ranges X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate 1 - 20,000 mm/min Rapid traverse 20 m/min Feed force: 12,000 N Clamping surface of the table 920 x 380 mm T-slots 7 pcs, 12-H8 mm Max. table load 250 kg Table height 1,004 mm Distance spindle nose - table 94 - 704 mm Spindle overhang - column 405 mm Spindle speed 50 - 18,000 rpm, stepless Spindle drive 10.2 kW (60% duty cycle) Max. torque 70 Nm (up to 1,240 rpm) Spindle taper SK 30 / DIN 69871A Pull stud DIN 69872 Drilling capacity in steel 25 mm Milling capacity in steel / aluminium 100 / 700 cm³/min Tapping capacity in steel / aluminium M20 / M24 Tool changer 24 positions Tool change time approx. 6 sec. Chip-to-chip time approx. 8 sec. Control Heidenhain TNC 426 Power supply 400 Volt, 50 Hz Connected load 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system 200 liters, external - Spindle cooling unit, external - Central lubrication Vogel - Pneumatic supply 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: Dkodpfx Aey N Du Deaqel - Control on 97,000 h - Machine on 80,000 h - Program run 42,000 h Space required L x W x H 2,000 x 1,700 x 3,000 mm Weight approx. 3.2 tons Good condition

Kondisi: bekas, Tahun pembuatan: 2017, lebar pemotongan maks.: 4200 mm ketinggian pemotongan maks.: 2200 mm diameter mata gergaji: 250 mm Dsdpfexg Igiox Aaqjkl ketebalan pemrosesan maks.: 60 mm lubang mata gergaji: 30 mm sandaran bawah: bantalan plastik meja penyangga material: palang plastik, dapat ditarik sistem pengukuran: skala kemiringan kepala gergaji: manual umpan gergaji: manual penempatan: berdiri bebas penyedotan debu: eksternal penguncian balok gergaji: manual berat kira-kira: 1000 kg dimensi: 5600 x 1700 x 3000 mm daya motor: 4,2 kW Lokasi penyimpanan: Nattheim

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat muatan maksimum: 27.000 kg, berat keseluruhan: 8.806 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 04/2021, panjang total: 14.040 mm, lebar total: 2.600 mm, suspensi: udara, warna: putih, Tahun pembuatan: 2021, Perlengkapan: kemudi berkuasa, riwayat servis lengkap, unit pendingin,

Kondisi: bekas, nomor mesin/kendaraan: 008167, arbeitsbereich_achse_x_y_spindel Dkjdpfx Aaex A Hczoqsl

Kondisi: bekas, nomor mesin/kendaraan: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm Number of units: 1 Dkedpfxjy Nkmms Aaqjl Positioning via CNC control: yes Lateral horizontal groups: yes

Kondisi: bekas, Automatic lathe, turning machine with copying attachment UMA type F1 NK 60 Copying lathe for chuck-turned parts Machine no.: 28-0031 Year of manufacture: 1971 Max. turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power: 5.5 kW Dkjdpfx Ajib D H Rsaqol Power supply: 380 Volt, 50 Hz - Spindle flange for chuck mounting: short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4-speed gearbox - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER type KMCA 61, with hydraulic feed motion - Left side with cross slide with hydraulic feed motion - Coolant system installed under machine bed - Hydraulic power unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement for automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement for hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight of automatic lathe: 2400 kg Weight of hydraulic unit: 400 kg Total weight with pallet: 3000 kg Good condition

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLS, year of manufacture 2013 Technical Data: Manufacturer: Dixi Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film Dodpfxoy Ni Hxj Aaqekl The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00–14:00. On Fridays, we are available from 08:00–13:00. Please note: All technical data is based on manufacturer’s specifications. We assume no liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLS, Year of Manufacture 2013 Technical Data: Dedpfxsy Ni Hre Aaqekl Manufacturer: Dixi Year: 2013 Pressing Force: 60 t Drive Power: 11 kW, 32 A Filling Opening: 990 x 1110 mm (W x L) Bale Size: 1100 x 800 x 1200 mm Bale Weight: approx. 370–450 kg Tying: 3-fold manual Machine Dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: Paper, Cardboard, Film The press is in good, fully functional condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. For questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not accept any liability for the details provided or possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made in advance payment, ex works, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLD, Year of Manufacture 2015 Manufacturer: Dixi Model: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Dodey Ni Euopfx Aaqokl Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. We are happy to answer any questions about the machine by phone from Monday to Thursday, 8:00 a.m. to 2:00 p.m. On Fridays we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. Sale against advance payment ex works, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Baler Dixi 60 SLD, Year of Manufacture 2012 Manufacturer: Dixi Model: Dixi 60 SLD Year of Manufacture: 2012 Drive Power: 7.5 kW, 400 V / 32 A Feed Opening: 990 x 1,110 mm (W x L) Pressing Force: 60 t Pressing Cycle: approx. 47 s Bale Size: 800 x 1,100 x 1,200 mm (W x H x L) Bale Weight: approx. 370-410 kg Tying: 3-fold, manual Machine Dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine Weight: approx. 5,420 kg Materials: Paper, cardboard, film The baler is in good condition. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical specifications are based on information provided by the manufacturer. We do not accept liability for the information provided or for any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Dsdpfjy Ni Dqex Aaqjkl Sale is ex works, prepayment required, without warranty or guarantee.

Kondisi: baik (bekas), Hydraulic power unit, hydraulic pump, hydraulic station, universal power pack, hydraulic module -Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / accumulator / filter etc. Dodjgz Irvepfx Aaqjkl -Type: 03 HDJ -Motor power: 22 kW / 1,460 rpm -Tank capacity: approx. 240 litres -Pressure gauge: up to 250 bar -Individual components: accumulator / hydraulic tank / filter / valves, see photos -Quantity: 2 units available -Price: per unit -Dimensions: 1060/820/H1530 mm -Weight: 738 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 23.905 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 600 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 2.221 batang, langkah pembukaan: 335 mm, panjang total: 2.420 mm, lebar total: 1.700 mm, tinggi total: 3.100 mm, berat keseluruhan: 6.700 kg, Perlengkapan: dokumentasi / manual, Dijual mesin injection molding ENGEL INSERT 200V/60 yang terawat dengan hanya 23.905 jam operasi. Mesin ini hanya digunakan untuk pengujian sampel. Inspeksi dengan arus listrik dapat dilakukan kapan saja! Dodsy Iwlajpfx Aaqjkl Data teknis sesuai gambar! Mesin tersedia segera!

Kondisi: siap digunakan (bekas), Deckel Maho 2238-4630 meja putar SN: 0174 untuk mesin FP4-60 – diameter: 63 cm / tinggi: 43 cm, bekas, bekas pakai normal, 100% berfungsi, lingkup pengiriman sesuai foto. PERHATIAN: Biaya pengemasan dan pengiriman harap ditanyakan secara terpisah! Dedsy Np Najpfx Aaqekl

Kondisi: siap digunakan (bekas), Monitor Grundig CNC 36 / 44216-007.00 untuk Deckel Maho FP4-60, bekas, kondisi terawat dengan baik, 100% berfungsi, termasuk sesuai foto. Dkedpfx Aaey Nqaysqol