Beli Homag Edgebander Sisi Ganda Berbentuk Lembut bekas (6.403)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) "SOFTFORMING" Edge material (rolls) thickness (min/max) mm: 0.4 / 3 Panel thickness (min/max) mm: 8 / 60 Control / Software: PC 22 / WoodCommander Feed speed (adjustable) m/min: 10 - 40 Side adjustment, aggregate carrier manual mm: 30 - 80 FORMATTING UNITS: Dcedpot N H Tajfx Aiush Spraying device (for liquid anti-adhesive) Double jointing cutter unit KD 10 (2 x kW 6.6) Milling unit for softforming (2 x kW 1.85) 0°-20° Belt sanding unit for straight edge KS 10 (mm 120 x 2100) Free space (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt glue + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with over/under trimming knives (in-lay) Edge magazine for rolls E3 (compartment no. 6) End trimming unit HL 84 (2 x kW 0.8) 0°-30° (max 25 m/min) 1st milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x kW 0.55) 0°-30° (pneumatic adjustment) Universal milling unit for grooving, rebating, and profiling UF11 (1 x kW 4) 0°-90° Profile scraping unit PN20 (pneumatic) Finishing unit (flat scraper + smoothing unit) FA11

Kondisi: sangat baik (bekas), DOUBLE-SIDED EDGE BANDING MACHINE - Edge thickness (roll) (min/max): 0.3 - 3 mm - Workpiece thickness (panel) min./max.: 12-40 mm - Working width (min./max.): 250-2500 mm - PC control: PC22 - Top pressure system with driven rubber belts - Adjustable feed fence: 10-32 m/min - Liquid glue unit Dcsdpfx Ajwk Hp Tjiujh - Jointing milling unit (vertical milling machine): 2x 4 kW at 9000 rpm - Quickmelt adhesive unit A3 - Pressure zone C (manual adjustment) "A" - Roll holder for 2 rolls - End trimming unit: HL 84 (2x 0.22 kW at 12000 rpm) - Pre-milling unit (2x 0.4 kW at 12000 rpm) - Finishing unit (scraper blade unit + buffing unit): FA11 - Polishing unit

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGEBANDING MACHINE (LEFT-HAND SIDE) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Veneer edges possible with limitations up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control / Software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorised timing belt Spray unit (for liquid anti-adhesive) Adjustable fence Jointing unit - 08.378 (2 x 4.5 kW) Gluing unit (hot melt adhesive) 04.1570 Pressure zone Edge magazine for rolls (number of compartments): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and contour trimming) 08.342 CNC-controlled (2 x 0.66 kW) servo Dedsr Ttflspfx Aiuech Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal routing unit for grooving/rabbetting and profiling 08.190 (1 x 4.5 kW)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, lebar benda kerja (maks.): 2.500 mm, panjang benda kerja (maks.): 200 mm, kecepatan rotasi (maks.): 18.000 rpm, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Maximum panel width: 2,500 mm Minimum panel width: 130 mm Maximum panel height: 50 mm Minimum panel height: 8 mm Maximum panel length: 200 mm Minimum panel length: 30 mm UNITS Trimming Unit Unit: Trimming Automatic adjustment (time-controlled) Motor power: 2.2 kW Maximum speed: 6,000 rpm Magazine for coil feed Number of positions: 1 Glue application system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge Processing Unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Maximum speed: 18,000 rpm Edge Processing Unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Maximum speed: 18,000 rpm Edge Processing Unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge Processing Unit 4 Unit: Brush Number of motors: 2 Edge Processing Unit 5 Unit: Top router Number of motors: 1 Edge Processing Unit 6 Unit: Top router Number of motors: 1 MACHINE DETAILS Total installed power: 12 kW Glue system: PUR Pressure type: Rubber-coated belts Dcsdpfx Aexxavtoiush Number of trimming units installed: 1 Number of edge processing units installed: 6 EQUIPMENT Spray unit CE marking

Tahun pembuatan: 2007, Kondisi: sangat baik (bekas), I am selling a double-end tenoning and milling machine FRIULMAC IDRAMAT, year of manufacture 2007. Working width up to 2500 mm Djdpfxsib A E Aj Aiusch Configuration left side / fixed: 1 + 1 unit sawing aggregates top + bottom / 3.0 + 3.0 kW 1 + 1 unit grooving saw aggregates front + rear with pneumatic lift Configuration right side / movable: 1 + 1 unit sawing aggregates top + bottom / 3.0 + 3.0 kW 1 unit special milling aggregate top / 5.5 kW Upper material pressure belt with feed. Special design, also suitable for edge sizing. Through-feed machine. Siemens Simatic control panel. Condition: Very good. Available immediately.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: AH/003306, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 3.200 mm, kecepatan pemakanan sumbu X: 40 m/menit, DETAIL TEKNIS Bukaan bahu mobile: 3.200 mm Lebar panel maks.: 3.200 mm Tinggi panel min.: 10 mm Tinggi panel maks.: 60 mm Ketebalan edging gulungan, minimal PVC-ABS: 0,3 mm Ketebalan edging gulungan, maksimal PVC-ABS: 3 mm Dedpfx Aioxx N D Heujch Kecepatan pengumpanan: 10 - 40 m/menit Jarak antar pin tarik: 500 mm PERLENGKAPAN Sabuk penekan karet bermotor Konveyor dengan pin tarik Kontrol CNI pada panel kendali terpisah Unit penyearah dengan dua motor (untuk setiap sisi) Unit lem dengan pre-melter untuk lem EVA Rol penekan edging Magasin penahan edging dengan 2 posisi Unit pemotongan dengan dua motor Grup trim tumpang tindih Unit finishing bertingkat dengan dua motor Agregat pembulatan dengan 4 motor Unit milling miring 0-90° Unit pembersih edging Grup sikat

Kondisi: baik (bekas), Tahun pembuatan: 2013, Kantendicke Rolle 0,4/3 mm / Streifen 0,4/22 mm Werkstückdicke 10-65 mm Werkstücküberstand 140 mm Vorschubgeschwindigkeiten 10-14-18-20 m/min Ausstattung: - Doppelte Kantenfräseinheit - Leimauftragsstation - Kappstation - Grobfräseinheit Dcedpfx Aiju Hldmeuoh - Feinfräseinheit - Profilfräseinheit - Universalfäseinheit - Flachziehklingeneinheit - Kantenpoliereinheit - Steuerungseinheit "Sintra" Abmessungen (L x B x H) ca. 7000 x 1400 x 2100 mm Gewicht ca. 3600 kg Maschinennummer 94391 Baujahr 2013 CE

Kondisi: bekas, Tahun pembuatan: 2011, nomor mesin/kendaraan: 0-201-50-1289, jam operasional: 7.062 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 1.400 mm, model controller: POWERCONTROL PC 85, tinggi pelat: 300 mm, kecepatan spindel (maks.): 24.000 rpm, No reserve price – guaranteed sale to the highest bidder! CNC Machining Center for Milling, Drilling, and Edge Banding! Collection of the machine must take place between 10.06.26 and 30.06.26! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Max. panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of work zones: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total vertical + horizontal spindles: 25 Number of milling spindles: 2 Total tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Vacuum pump flow rate: 300 m³/h Positioning via NC Vacuum cups for workpiece clamping Vacuum cup positioning via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total vertical + horizontal spindles: 25 Milling units Dcjdpfx Aoy Uviwoiueh Milling spindle 1: Top Number of controlled axes for milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool changer Milling spindle 2: Top Number of controlled axes for milling spindle 2: 4 Automatic tool changer milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Max. panel height: 60 mm Model: POWER EDGE 360° Positioning: Mounted on the main frame of the machine Number of positions edge band magazine: 2 Gluing unit Glue pot for hot-melt adhesive Premelter for hot-melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: At the rear of the machine Positions tool magazine 2: 2 Position tool magazine 2: At the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: At the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D:350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Pod and rail work table NC-positioned workpiece clamping Vacuum cups Vacuum pump Drilling unit top 2 milling spindles POWER EDGE 360° edge banding unit Glue pot for hot-melt adhesive Premelter for hot-melt adhesive Edge band magazine 4 tool magazines DATALOGIC barcode reader Safety net Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8527

Tahun pembuatan: 2006, Kondisi: bekas, ketebalan tepi (maks.): 12 mm, kecepatan pemakanan sumbu X: 40 m/menit, tinggi pelat: 60 mm, panjang pelat: 2.400 mm, lebar pelat: 1.000 mm, nomor mesin/kendaraan: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machinery package comprises four machines, configured as follows: Item 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Item 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Dcedjy Ur Hlepfx Aiueh Machine type: Edge banding machine Bonding system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel sizing/milling units: 3 Pre-milling unit Corner rounding unit Grooving unit Pressure section Panel support guides NC positioning Panel infeed alignment system Panel sizing/milling units Unit 1: Pre-milling unit Automatic sequenced engagement NC positioning unit Unit 2: Double trimming unit top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm NC positioning Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatic sequenced engagement NC positioning Gluing and edging system Number of edge magazine positions: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating panel edge Edge processing units Number of edge processing units: 8 Edge processing unit 1: End trimming unit Number of motors: 2 NC positioning Edge processing unit 2: Rough trimming top and bottom Number of motors: 2 Edge processing unit 3: Fine trimming for flush and radius milling Number of motors: 2 NC positioning Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool changer NC positioning Edge processing unit 5: Milling/roughing unit Number of motors: 1 Unit 5 motor power: 12 kW Unit 5 speed: 10,000 rpm Automatic tool changer NC positioning Edge processing unit 6: Edge scraper blade NC positioning Edge processing unit 7: Glue scraper blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Item 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Item 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Return conveyor for edge banding machine Max. panel width: 1,000 mm Max. panel length: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejector Panel feeder The machine will be sold and delivered in its actual physical and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8522

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 7.610 h, tegangan masuk: 400 V, arus masuk: 10 A, tinggi total: 1.650 mm, panjang total: 4.400 mm, lebar total: 1.000 mm, de-to-hu-it-lt-001 Dsdsy Tnuvopfx Aiusch

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: 0-200-03-9040, Fungsionalitas: berfungsi sepenuhnya, ketebalan tepi (maks.): 20 mm, kecepatan pemakanan sumbu X: 18 m/menit, tahun perombakan terakhir: 2025, de-3034 Dsdpfx Aijzap H Souech

Kondisi: bekas, nomor mesin/kendaraan: 008522, translation_001 Dcsdpoy Nx U Esfx Aiueh

Kondisi: bekas, nomor mesin/kendaraan: 008364, max-breite-des-paneels-1000-mm Dcodpfx Ajx Swc Toiujh

Kondisi: bekas, nomor mesin/kendaraan: 008198, laylra60 Djdpfx Aex A Hbkeiusch

Kondisi: bekas, nomor mesin/kendaraan: 008402, de-1 Dcodpsygtbmjfx Aiueh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, jarak pergerakan sumbu X: 4.300 mm, jarak lintasan sumbu Y: 2.250 mm, jarak gerak sumbu Z: 400 mm, daya motor spindle: 10.000 W, kecepatan spindel (maks.): 24.000 rpm, jumlah sumbu: 3, This 3-axis CNC machining center BHP200/VANTAGE714 by HOMAG WEEKE was manufactured in 2013. It features an impressive working area with an X-axis of approx. 4300 mm and a Y-axis of approx. 2250 mm. The machine is equipped with a powerful 10 kW spindle reaching speeds of up to 24,000 rpm, and includes an automatic tool changer with 14 positions. If you are looking for a high-quality CNC milling machine, you should consider the HOMAG WEEKE BHP200/VANTAGE714, which we are offering for sale. Contact us for further details. • Series: Weeke Vantage 200 Platform Dsdpjzatdbjfx Aiuoch Electrical Data (from nameplate) • Supply: 415Y / 240 V • Phases: 3-phase • Frequency: 50 Hz • Full load current: 61 A • Recommended fuse: 80 A • Control voltage: 24 V Spindle: • Tool interface: typically HSK-F63 • Tool change: automatic Axes: • Servo-driven gantry system Tool Changer • 14-position Drilling Block • Vertical drills • Horizontal drills • Grooving saw Table type • Flat nesting vacuum table • MATRIX table variants • Zoned vacuum system • Automatic vacuum control Control / Software (typically paired with) • HOMAG performance control / Homatic 2000 IPC • WoodWOP software • MCC production software

Kondisi: bekas, Tahun pembuatan: 2007, tinggi total: 2.200 mm, panjang total: 7.500 mm, lebar total: 1.500 mm, translation-01 Dsdpfjyzp Aksx Aiuech

Kondisi: bekas, nomor mesin/kendaraan: 008516, Tipe tepi yang terpasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR Penggilingan sambungan: ya Unit multifungsi: ya Dsdozbrn Ispfx Aiujch Kecepatan makan maksimum: 18 m/menit Ketebalan panel maksimum: 60 mm Unit kerja: 7 unit

Kondisi: bekas, nomor mesin/kendaraan: 008016, Area kerja sumbu X: 3300 mm Area kerja sumbu Y: 1550 mm Permukaan kerja: Dengan penyangga konsol vakum Daya spindle utama: 10 kW Jumlah sumbu terkontrol: 5 sumbu Jumlah spindle bor: 35 Dedpfxow Idhms Aiusch Jumlah tempat alat: 14

Kondisi: bekas, nomor mesin/kendaraan: 008412, de-01 Dcedpfxjyilxmo Aiujh

Kondisi: bekas, nomor mesin/kendaraan: 008403, max-bearbeitungshoehe-hoehe-verarbeitbare-breite-vorschubgeschwi ndigkeit-arbeitswellen Dcodpfx Asykivheiush

Kondisi: bekas, nomor mesin/kendaraan: 008627, 1 Dcsdpszakdfefx Aiush

Kondisi: bekas, nomor mesin/kendaraan: 008628, de-1 Dcsdpozakc Usfx Aiujh

Kondisi: bekas, nomor mesin/kendaraan: 008626, arbeitsdaten-1 Dedpozakc Isfx Aiusch

Kondisi: bekas, nomor mesin/kendaraan: 008587, typ_der_angebrachten_kante Dcodjy In Dgspfx Aiuoh