Beli Mammut Wmk 250 bekas (10.380)

Kondisi: baik (bekas), We offer a Heraeus heating and drying oven for sale. Heraeus Heating and Drying Oven Redpsvzqyfjfx Alaot Manufacturer: HERAEUS Model: 6200 Condition: Used, in good condition Forced Air Drying Oven: up to 250°C Internal volume: 180 litres Temperature controller and timer Air circulation Electrical specifications: 2800 Watts, single phase, 230 Volts, 50 Hz, 12.3 A, IP20 External dimensions: Width: 800 mm Depth: 890 mm Height: 810 mm Internal dimensions: Width: 510 mm Depth: 550 mm Height: 650 mm Weight: 100 kg

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), A nearly new Mammut trimming machine for the further processing of drawn and pressed parts, including a welding unit, is available. Operating hours: 444h. Included is a CEA BSW 50 welding device. Documentation is available. On-site inspection is possible. Redsvnd T Eopfx Alaot

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Kami akan menjual lini finger joint kami pada akhir 2025/awal 2026, mulai dari pengurai vakum (gambar 1) hingga mesin press finger joint termasuk gergaji pemotong panjang (gambar 11), kecuali gergaji pemotong cacat tidak dijual. Paket finger joint HK 250 L tahun produksi 1995 (lihat gambar 7), di mana pada tahun 2013 sistem kontrol dan mesin press finger joint telah diganti. Pengaplikasian lem dilakukan dengan sistem pencampuran bawah menggunakan roller lem (gambar 6). Sistem kontrol seluruh lini dan mesin press diperbarui oleh perusahaan Somako. Lini ini masih akan beroperasi hingga akhir 2025 dan dapat dilihat langsung saat produksi. Harga tergantung pada apakah seluruh lini atau hanya sebagian yang dibeli. Komponen individual juga dapat dijual sebagai suku cadang. Redew Uf Tkepfx Alaet

Kondisi: baik (bekas), Tahun pembuatan: 2001, kecepatan spindel (min.): 2.500 rpm, Tahun Model: 2001 Diameter Chuck: 10" Jumlah Sumbu: 2 Panjang: 650 mm Rodpfx Aox N A Dwelast Diameter Leher: 650 mm Kecepatan Spindel (Rpm): 2500 Jenis Material yang Dapat Dikerjakan: Baja, Aluminium, Titanium, Grafit, Tembaga, Invar, Komposit, Delrin, Peek

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: Res BS, Demag PK2 chain hoist crane lifting unit 250 kg / 500 kg Redsvzkylepfx Alajt Approx. 40 units available!!! 250 kg / 0.25 t lifting capacity – single fall – €500 500 kg / 0.5 t lifting capacity – double fall – €600 With dual lifting speeds, lifting height approx. 3–4 m Complete with pendant control and load hook Total weight approx. 40 kg, connection: 380V, 50Hz Top condition, fully functional. Not a worn-out or used-up unit! Just connect and start operating. Removed from ongoing operation. Item location: 75053 Gondelsheim See pictures

Kondisi: sangat baik (bekas), Stepped clamp (28366)\nClamping height: 200 - 250 mm\nT-slot width: 12 mm\nClamping screw: M10\n4 units available\nWeight: 8.5 kg Redpfx Aljln Ulaeaot

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 500 Ah, tegangan baterai: 80 V, tinggi total: 627 mm, panjang total: 1.025 mm, lebar total: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1-year warranty + Including Aquamatik watering system + Including end connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol provided on delivery) + Year of delivery: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLACH - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Rsdpfx Alowzvzysaot Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - top battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Common battery sizes available, please inquire. Transport possible.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 1.000 kg, frekuensi input: 50 Hz, daya nominal (semu): 250 kVA, jenis arus keluaran: tiga fasa, Perlengkapan: Pelat tipe tersedia, 6 months warranty Redjwnfupspfx Alajt

Kondisi: bekas, Vice Jaw width: 200 mm Rsdpfedd Tpiex Alaet Jaw height: 80 mm Base plate: bottom width 250 mm, bottom length 500 mm Opening width: 250 mm Weight: 72 kg

Kondisi: baru, Tahun pembuatan: 2025, Our SAPI pressure blasting unit, type "Mammut," with a 100-liter vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excess moisture. For safe operation, our safety shut-off is included. This starts and stops the blasting process when the hand lever mounted on the blasting hose is engaged. The pressure blasting unit is delivered fully operational, space-savingly mounted in a mesh box. Only the compressed air supply must be connected and filled with blasting media. Transport can be carried out conveniently by forklift or pallet truck. A lockable aluminum box is provided for storing protective clothing, spare parts, etc. Scope of delivery: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off - Blasting media sieve - Cover - 10 m blasting hose, ø 25x7 mm, completely assembled - Silicon carbide venturi long nozzle, diameter 6 mm, 8 mm, or 10 mm (selectable) - RED 2 sandblasting helmet - Sandblasting overall, nylon/cotton - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled - Breathing air filter/activated carbon filter SAF - Wear part set consisting of: * 100 tear-off foils for RED 2 * 10 inner lenses for RED 2 * 1 blasting hose coupling 25x7 mm nylon * 2 rubber seals for hose coupling * 1 nozzle holder 25x7 mm - Mesh box with hose holder - Lockable aluminum box Technical Data for Pressure Blasting Unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Permanent 1" pipework (internal & external) - Rubber-coated metal cone with gasket - Generously sized handhole Rjdpfx Ajwc Ri Ielajt - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common media) - Capacity: 100 liters - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh Box Dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight including all accessories: 260 kg

Kondisi: baru, Tahun pembuatan: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter pressure vessel is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar using the integrated pressure regulator. The unit is also equipped with a built-in water separator, which removes moisture from the compressed air to prevent the blasting media from clumping due to excess humidity. For safe operation, our safety shut-off system is included. This starts and stops the blasting process with the actuation of the hand lever, which is mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 200 L" - Pressure regulator 1 1/4", permanently installed - Water separator 1 1/4", permanently installed - SAPI safety shut-off system Technical data - Pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-tested with certificate - Fixed piping 1 1/4" internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosage valve (suitable for all common media) Rsdpfx Aljwc Rk Ejaot - Capacity: 200 liters - Total height: 1,420 mm - Vessel diameter: 600 mm - Total diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest shut-on and shut-off times in compliance with trade association regulations (VBG 48) - Pressure can be precisely set before blasting – continuously adjustable from 0.1 to 12.0 bar - Lower media consumption, as the pressure vessel remains constantly pressurized and no unnecessary run-on is required - Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up required → less consumption & less hose wear - No condensate formation in the vessel, as it remains constantly pressurized → no venting or aeration required at each start/stop - Optimum blasting media dosing through hardened fine dosing valve - Reduced compressed air requirement → noticeably lower diesel consumption - One-man operation, as the pressure can be displayed and adjusted directly at the manometer – also possible without starting the machine - No sensitive components such as control valves, membranes, or seals → low-maintenance and reliable - Only the blasting hose at the safety shut-off requires regular inspection and replacement if necessary

Kondisi: baru, Our SAPI pressure blasting unit, type "Mammut," with a 60-liter tank capacity, is suitable for all standard blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the built-in pressure regulator. A water separator is also permanently installed on the blasting unit, which removes moisture from the compressed air and prevents clumping of the blasting media due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off Technical data of pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Fixed pipework 1" internal and external - Metal cone covered with rubber and rubber gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 litres - Total height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg Rodpewc Afhofx Alaet ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off - Fastest switching times on and off, while complying with trade association regulations (VBG 48) - The pressure can be precisely set before the actual blasting process, infinitely adjustable from 0.1 to 12.0 bar - Reduced media consumption, as the pressure vessel remains permanently pressurized, preventing unnecessary media run-on - Upon restarting, full blasting pressure is immediately available at the nozzle without needing to build up slowly. This ensures significantly lower media consumption and considerably less wear on the blasting hose - No condensation forms in the vessel, as the tank remains continuously pressurised and is not repeatedly vented for each start and stop. This method also offers other advantages as follows: - Optimal blasting media dosing with hardened fine dosing valve - Reduced compressed air requirement, resulting in significantly lower fuel (diesel) consumption - One-man operation, as blasting pressure is constantly displayed by the vessel pressure and can easily be adjusted via the manometer without starting beforehand - No failure-prone components such as control valves, membranes or seals, making it low-maintenance and reliable. Only the blasting hose in the safety shut-off needs to be checked and replaced if necessary.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.451 kN, diameter sekrup: 55 mm, berat injeksi: 618 g, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Mesin injeksi ENGEL dengan robot E-PIC Z! DETAIL TEKNIS Gaya penjepit: 250 ton Diameter screw: 55 mm Berat injeksi: 618 g Rodpoy Ewgfjfx Alaet DETAIL MESIN Ukuran plat penjepit: 1.050 mm x 900 mm PERLENGKAPAN Robot Engel E-PIC Z (Tahun 2017) Plat penjepit diperbesar 3x cincin penahan 3x katup ventilasi Catatan: Jika membeli beberapa barang dari lokasi yang sama (lihat penawaran di bawah), Anda akan mendapatkan biaya pembongkaran dan pemuatan yang lebih murah.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.451 kN, diameter sekrup: 70 mm, volume langkah: 1.000 cm³, berat injeksi: 901 g, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DATA TEKNIS Gaya penutupan: 250 ton Diameter sekrup: 70 mm Volume injeksi: 1.000 cm³ Berat injeksi: 901 g DETAIL MESIN Pelat pemasangan yang diperbesar: 1.050 x 900 mm Rjdpfxsy Ewd Re Alast Catatan: Jika membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), Anda akan dikenakan biaya pembongkaran dan pemuatan yang lebih murah.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Pusat Mesin Universal 5 Sumbu DMG DMF 250 Linear Tahun Pembuatan: 2006 Kontrol: Heidenhain iTNC530 Rjdpfox Nmllox Alaot Perjalanan X 2.500, Y 920, Z 820mm Chuck Rotary NC – Hoffmann (sumbu A) Sumbu NC B: -105 ~ 105 derajat (Kepala Spindel) Sumbu NC C: 360 derajat Majalah ATC 30 alat Spindel: 18.000 rpm Kepala spindel: BT40 Pengukuran langsung sumbu X, Y & Z Penawaran Khusus

Kondisi: bekas, Tahun pembuatan: 2009, Diameter hisap: 250 mm Aliran volume nominal: 3534 m³/jam Luas filter: 22,6 m² Motor: 5,5 kW Briket: Kapasitas output sekitar: 30 kg/jam Diameter briket: 65 mm Motor: 3,0 kW Rodpfeyym A Sox Alast Lokasi gudang: Nattheim

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis Travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2-axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2-axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and Sub Spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: infinitely variable / infinitely variable Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Draw tube bore: 66 mm / 52 mm C Axes: Smallest input increment: 0.001° Smallest command increment: 0.001° Max. indexing speed: 600 rpm Feed rate: 1–4800 mm/min C-axis clamping: disc brake C-axis positioning time: 1.5 s Upper/Lower Turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Tool size square: 25 mm Tool size round shank: 32 mm Driven tools: Drive system: individual drive Spindle speed: 6000 rpm / 3600 rpm Speed range: infinitely variable Number of tool stations: 12 × 2 Collet size: ER32 Tool holder capacity straight: 2 mm – 20 mm Tool holder capacity cross: 2 mm – 20 mm Drive Power and Torque: Rjdpfx Aljy Ipp Rsast Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Floor space required: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as per photo documentation includes, among others: Nakamura lathe, tool holders (driven and static), collets, complete machine documentation, gantry loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is provided for the correctness, completeness, or timeliness of the information provided.

Kondisi: baik (bekas), Tahun pembuatan: 2002,

Kondisi: bekas, The plant is suitable for the agglomeration of thermoplastic films and fibers. Throughput varies depending on the material and ranges from 500 kg to 1,000 kg/h. The plant consists of: • Feed conveyor • Load-dependent control for the feed conveyor Redpfoy Icztjx Alaet • Metal detector coil • HERBOLD granulator type SMS 45/100-H5-3 • Pneumatic material conveyance to the storage silo • Plastcompactor unit HV-70, consisting of storage silo screw conveyor, plastcompactor, central blower, and cooling circuit • HERBOLD secondary granulator type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Fines recirculation to the compactor silo • Material conveying system type MFT with Big-Bag station and automatic diverter valve to the on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.

Kondisi: bekas, The plant is suitable for the agglomeration of thermoplastic films and fibers. Throughput varies depending on the material and ranges from 500 kg to 1,000 kg/h. Rjdpfey Ia Ttex Alajt The plant consists of: • Feed conveyor • Load-dependent control for the feed conveyor • Metal detector coil • HERBOLD granulator type SMS 45/100-H5-3 • Pneumatic material conveyance to the storage silo • Plastcompactor unit HV-70, consisting of storage silo screw conveyor, plastcompactor, central blower, and cooling circuit • HERBOLD secondary granulator type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Fines recirculation to the compactor silo • Material conveying system type MFT with Big-Bag station and automatic diverter valve to the on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.

Kondisi: baik (bekas), Tahun pembuatan: 1984, Max. wheel diameter: 250 mm Wheel width: 275 mm Module (max.): 6 Machine weight: approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all indexable cylindrical gears such as: - Straight and helical spur gears, worm wheels and worms, splined shafts, keyed shafts, broached profiles, chain and ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Technical data: - Max. workpiece diameter: 250 mm - Max. module: 6 mm - Max. axial feed travel: 275 mm - Max. tangential feed travel: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. cutter length: 170 mm - Min. clamping surface (table): 195 mm - Max. clamping surface (table): 470 mm Performance Cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special version with DC motor): 140 ... 400 rpm Weight - Net machine weight: approx. 5,000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3,950 mm DC drive: 3,450 mm (or 3,350 mm as per table) - Width: 3,300 mm - Height: Machine: 1,980 mm Machine with DC drive: 2,150 mm Rjdpfxjv T Nqae Alast Electrical cabinet: 2,200 mm

Kondisi: bekas, Tahun pembuatan: 1998, Diameter benda kerja pada rasio transmisi 1:10 300 mm Diameter benda kerja pada rasio transmisi 1:1 212 mm Rodpfx Aloul El Teajt Jumlah gigi - maks. 200 Jumlah gigi - min. 6 Pergerakan x 300 mm Kecepatan sumbu X 0,1-5.000 mm/detik. Pergerakan y 400 mm Kecepatan sumbu Y 0,1-5.000 mm/detik. Sumbu A -170 / +170 ° Kontrol Siemens Sinumerik 840 C Kebutuhan daya total 38 kW Berat mesin sekitar 10 t Kebutuhan ruang sekitar 4,20 x 2,20 x 2,10 m

Kondisi: bekas, jam operasional: 16.911 h,

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Arburg 420C 800-250 Year of manufacture: 1999 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dosage volume: 144 cm³ Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine produced injection-molded parts for the medical industry – cleanroom production conditions Euromap 12 Robot interface Core pull control Rjdpfx Alsy Dqa Asaot Injection unit hardened – bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our site in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, en-Arburg 420C 800-250 with Amboss+Langbein sprue picker Year of manufacture: 1999 Injection unit: Screw diameter: 40 mm Shot weight: 158 g Injection pressure: 1390 bar Dosage volume: 188 ccm Clamping unit: Clamping force: 80 t Tie bar distance: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Rjdpfxsy Dqcdj Alaot Drive: Pump/Motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests performed on the selected machine or to participate in live technical tests at our company in Łódź. Price: On request