Beli Millutensil Bv 30 Erg bekas (30.896)

Kondisi: bekas, 3264 Complete Sawmill Line Möhringer / Paul Used, still connected to power until 30/06/26 Consisting of: - Log cross-cutting table with powered conical rollers Length measurement by Hecht with remote-controlled light barriers - 1 transverse conveyor to the frame saw, 7000 x 5500 mm (LxW), Cam chains in mint condition - 1 transverse conveyor, 3800 x 4000 mm (LxW) - 1 roller conveyor before the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for model timber, cross-extraction with 2 selector flaps - Quick-clamp carriage for frame saw (EWD), with auxiliary carriage - 1 auxiliary conveyor for log infeed before the frame saw - Butt reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year 1994 Feed opening 700 mm, stroke 550 mm, saw bands hydraulically adjustable, conveyor belt, log handling with adjustable laser, round timber measurement by Hecht, Jansen tensioner, angels, 60 saw bands, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year 1994 With pre-cutting, light barriers and laser for adjustment - 1 roller conveyor 4000 x 1400 mm (LxW), with corrugated rollers, cross-extraction with air cylinders - 1 S-type conveyor with buffer, 3500 x 4000 mm (LxW), pusher by Albert made of square tube - 1 S-type conveyor 3000 x 5500 mm (LxW), motor with adjustable slip coupling, function monitoring, pusher made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year 1992 - 1 double edger Paul KME 2 / 750 R, year 1988 With strip separator, right bushing motor-operated adjustable, cross-cutting, length sorting, preselection programs by Österle - 1 conveyor belt 7400 x 400 mm (LxW) - 1 conveyor belt 4000 x 400 mm (LxW) - 1 conveyor belt 3000 x 500 mm (LxW) - 1 trough conveyor approx. 6500 x 500 mm (LxW), inclined, for sawdust - 1 HOLTEC trough conveyor approx. 6500 x 500 mm (LxW), inclined, for wood chips - 1 HOLTEC trough conveyor, horizontal, with left- and right-hand drive as a distributor over the bins - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute Dsdpfxsyzr Tfj Ag Dscg - Frame saw sharpening machine OPL - Setter VOLLMER GSA, year 1996 - Frame saw sharpening machine VOLLMER (minor repairs needed, push cylinder bent) For sale on behalf of customer, ex location near 34125 Kassel, without dismantling, transport or assembly Dismantling, loading and transport can be offered as an option by us Errors in description and price excepted To avoid possible misunderstandings, inspection on site after prior appointment is strongly recommended Sale is as-is Technical data, condition descriptions, year of construction, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines, it applies: “purchased as seen” Images and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), produsen motor: Yunnei / DEF20CFA4, AG-B001 Dcsdpfjuidyisx Ag Deg

Kondisi: bekas, Tahun pembuatan: 1995, de2hu-001 Dcjdpfx Aoyqu Hxog Dog

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection possible. Dsdpfewg E Aksx Ag Docg

Kondisi: bekas, berat keseluruhan: 34.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 03/2007,

Tahun pembuatan: 1982, Kondisi: baik (bekas), nomor mesin/kendaraan: 3120, Manufacturer: Varinelli Milano Italy Model: BV 25 x 2000 x 630 Year of manufacture: 1982 Machine no.: 3120 Weight: 13,000 kg General / Technical Data: Vertical hydraulic internal broaching machine with 3 broaching stations and a movable workpiece table, in good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Dcjdpfxed I R Ngo Ag Deg Broaching stations: 3 units Distance between broaching stations: 200 mm Clear width between cylinders: max. 630 mm Cutting speed: hydraulic, steplessly adjustable from 1 m/min up to max. 9 m/min Return speed: hydraulic, steplessly adjustable up to max. 18 m/min Machine footprint: see machine layout drawing Power supply / connected load: 380 Volt 50 Hz / 43 kW Accessories / Special equipment: The machine is equipped with a workpiece shuttle table for 3 broaching stations. The tool clamping system features a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The automatic tool feeder is hydraulically and mechanically locked. The machine is fitted with a coolant system and an integrated chip conveyor for installation in a pit. Remarks: The machine is in good condition and still has its original paintwork. It is designed for series production of medium and large batch sizes; for optimal use, installation in a pit (foundation) is required. Pulling heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, panjang total: 1.500 mm, lebar total: 600 mm, tinggi total: 1.000 mm, tegangan masuk: 400 V, berat keseluruhan: 183 kg, jenis arus masuk: tiga fasa, daya: 2,63 kW (3,58 hp), Lisec-Gefriergerät KHB-30 für Versiegelungsroboter und Handversiegelungen, Baujahr 2007, in gutem Betriebszustand Vollaststrom 3,7 A Stromversorgung 3/N/PE 400 V, 50 Hz Dcsdpfxoyxm Hho Ag Dog

Tahun pembuatan: 2008, Kondisi: hampir baru (bekas), Main motor: 3.9 kW Carriage length: 1370 mm Blade diameter: 300 mm Angle adjustment: 0 – 45° Height adjustment: yes Maximum cutting height: 90 mm Dcodpfx Aemi Nz Dog Djg Two blade rotation speeds: 3700 and 5000 RPM

Kondisi: baik (bekas), minimum width of the central prism after cutting: 80 mm maximum width of the central prism after cutting: 280 mm electric saw adjustment diameter of spindles: 70 mm maximum diameter of saw blade: 800 mm maximum cutting height: 260 mm maximum number of saw blades: 2 pcs Dedpfx Ageu Evquo Dscg length of the infeed track: 5000 mm motor power: 2 x 15 kW

Kondisi: bekas,

Kondisi: bekas, nomor mesin/kendaraan: 008215, 96724d90 Dsdpfex A Tihox Ag Dscg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.500 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 700 mm, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.100 mm, panjang gelombang laser: 1.064 nm, frekuensi input: 50 Hz, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser for permanent marking is now indispensable. Dcsdjrxrrhjpfx Ag Deg The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and item numbers after setup. Furthermore, the software is capable of reading data (variable information such as drawing numbers, project names, etc.) from existing tables and transferring it automatically to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (three-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, moveable Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30 Watt, 20 Watt, or 50 Watt • Laser class 1 • Wavelength 1064 nm • Marking field size 150 x 150 mm (optionally larger) • Signal light for indicating operating status • Optional: rotary axis (three-jaw chuck) • Optional: fume extraction (incl. activated carbon filter) • Optional: digital height measuring system • Optional: autofocus system for automatic focus distance determination • Marking software EZCAD in German/English (other languages on request) • Pilot laser (simple preview, plaintext preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, berat keseluruhan: 150 kg, tinggi total: 2.300 mm, panjang total: 1.200 mm, lebar total: 600 mm, model controller: SPS-Steuerung, lebar kerja: 300 mm, tegangan masuk: 400 V, frekuensi input: 50 Hz, sambungan udara terkompresi: 6 batang, kapasitas beban per penyangga: 50 kg, jumlah laci: 1, akurasi pemposisian: 1 mm, tinggi kerja: 30 mm, panjang kerja: 400 mm, jangkauan kerja: 400 mm, Perlengkapan: Penandaan CE, penghadang cahaya keselamatan, Feeding and storage system for lightweight items in carrier trays. Tray feed for magazine loading in automated production processes. Specifically designed for surface- or contour-sensitive components. Dsdpfx Aoyx Hgbsg Djcg Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4-8 seconds) • Maximum tray weight including workpieces: 5 kg • Maximum tray stacker weight: 50 kg • Positioning accuracy: ± 1 mm • PLC control system with operator and monitoring display • ESD configuration • Safety package: light curtain from Leuze for tray stacker • Prepared for AGV communication – Siemens IWLAN client • RFID read-write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact design with minimal space requirements • Flexible adaptation to various machines via multiple interfaces • Low investment costs • Fully equipped • Sturdy construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage: 400V / 50Hz / 3ph • Minimum compressed air connection: 6 bar • Dimensions: 1200 x 600 x 2300 mm (LxWxH)

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, lebar total: 600 mm, panjang total: 1.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 150 kg, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, jangkauan kerja: 400 mm, tinggi produk (maks.): 30 mm, model controller: SPS-Steuerung Siemens Simatic HMI, frekuensi input: 50 Hz, sambungan udara terkompresi: 6 batang, kapasitas beban per penyangga: 50 kg, akurasi pemposisian: 1 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, pencahayaan, penghadang cahaya keselamatan, Feeding and storage system for lightweight items in carrier trays. Tray feed for magazine loading in automated production processes. Specifically designed for surface- or contour-sensitive components. Made in Germany Dcedpoyx Hrkefx Ag Dsg • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4-8 seconds) • Maximum tray weight including workpieces: 5 kg • Maximum tray stacker weight: 50 kg • Positioning accuracy: ± 1 mm • PLC control system with operator and monitoring display • ESD configuration • Safety package: light curtain from Leuze for tray stacker • Prepared for AGV communication – Siemens IWLAN client • RFID read-write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact design with minimal space requirements • Flexible adaptation to various machines via multiple interfaces • Low investment costs • Fully equipped • Sturdy construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage: 400V / 50Hz / 3ph • Minimum compressed air connection: 6 bar • Dimensions: 1200 x 600 x 2300 mm (LxWxH)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection Unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2020 bar Dosage volume: 231 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Dcjdpfx Ajy Dp Hzsg Deg Clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Hot runner control Injection unit hardened - bimetallic Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are checked by our service technicians before sale. It is possible to receive a video showing the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: diremaj di bengkel (bekas), Technical data for feed hopper with hydraulic moving floor and bag opener for recyclable materials from yellow bags, commercial waste, and residual waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions in current condition: 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the Machine: The feed hopper with bag opener was operated in a large recycling facility, where recyclables from yellow bags or commercial waste were tipped into the hopper using wheel loaders. The bags were opened by the bag opener and the recyclables were conveyed to a sorting plant, or commercial waste was metered for further processing. The system functioned flawlessly until it was dismantled and was replaced with a larger unit with higher throughput. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was performed and parts replaced: - Disassembly of the feed hopper and bag opener into individual components. Cleaning, partial sandblasting, priming, and painting of steel components. - Various wear and protective plates were fabricated and installed new. - The worn ends (approx. 40 cbm) of the moving floor tubes were cut off. New tubes were welded on and the surfaces were smoothed. - Complete renewal of the sliding plastic plates for the hydraulic moving floor. Dedpjyizxrefx Ag Djcg - Removal of the hydraulic power unit from the moving floor, draining the hydraulic oil tank, replacing the oil filters, and refilling with new hydraulic oil. - Replacement of all three hydraulic manifolds, all valves, the oil sight glass, and all hydraulic hoses from the power unit. - The seal kits and hydraulic hoses on all three hydraulic cylinders of the moving floor were replaced. - All six limit switches (proximity sensors) on the moving floor were replaced. - The conveyor chains on both sides of the scraper conveyor were replaced. - Seven driver strips of the scraper conveyor were replaced. - The drive motor for the bag opener's cutting shafts was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were renewed. - The entire sliding plastic plates for the hydraulic movement of the bag opener were replaced. The bag opener can be moved in depth, so the system can be used for commercial or residual waste without the bag opener when required. - Both side collision protection plates were replaced. - Various wear parts of the bag opener were replaced. - The entire installation was rewired electrically and reconnected. - The plant control system in the control cabinet was retrofitted by BRT Hartner to autonomous individual control and the standard program was reloaded into the control system. - The unit was commissioned and tested by BRT Hartner; see functional video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 14,6 kW (19,85 hp), tipe perpindahan gigi: hidrostatik, jenis bahan bakar: diesel, kapasitas tangki bahan bakar: 1 l, warna: kuning, berat operasi: 3.000 kg, berat muatan maksimum: 3.000 kg, tinggi angkat: 4.010 mm, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, jumlah tempat duduk: 1, pendaftaran pertama: 01/2026, kelas emisi: Euro 5, Tahun pembuatan: 2026, jam operasional: 1 h, nomor mesin/kendaraan: 1, Perlengkapan: kabin, lampu depan tambahan, pendingin udara, Excavators GT3000 The GT3000 excavator is a modern tracked machine designed for earthmoving tasks that require an optimal working range, high digging forces, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation works, installation jobs, municipal projects, and operations in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine that provides a rated power of 14.6 kW. This engine delivers stable and fuel-efficient performance. Working Range The excavator features a bucket with a capacity of 0.09 m³ and a width of 460 mm. The bucket breakout force of 17.6 kN ensures efficient digging, even in heavier soil types. The maximum digging depth of 2,810 mm and maximum digging reach of 4,375 mm offer a wide working range without the machine needing to be repositioned frequently. A maximum digging height of 4,510 mm and a dumping height of 2,760 mm make it easy to load material onto transport vehicles. Dimensions and Stability The total dimensions of the machine are 4,010 mm in length, 1,540 mm in width, and 2,360 mm in height to the top of the cab (1,380 mm to the top of the boom). The track ground contact length of 1,530 mm and track gauge of 1,510 mm ensure stability during operation. The 250 mm wide track shoes and low ground pressure of 26.7 kPa allow for safe operation on less compacted surfaces. Dodjymtfxjpfx Ag Docg Mobility and Maneuverability The tail swing radius of 710 mm allows for comfortable work in confined spaces. The swing frame width of 1,350 mm and a counterweight clearance of 485 mm, as well as a minimum ground clearance of 255 mm, ensure smooth movement over uneven terrain. The robust undercarriage with a total track length of 1,895 mm guarantees excellent grip and safe working conditions. Technical Specifications Operating weight: 3,000 kg Engine: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.6 kW Bucket capacity: 0.09 m³ Bucket width: 460 mm Bucket breakout force: 17.6 kN Swing arm: Present Joystick: Present Swing speed: 13 rpm Maximum digging height: 4,510 mm Maximum dumping height: 2,760 mm Maximum digging depth: 2,810 mm Maximum digging radius: 4,375 mm Tail swing radius: 710 mm Track ground contact length: 1,530 mm Total track length: 1,895 mm Track gauge: 1,510 mm Track shoe width: 250 mm Swing frame width: 1,350 mm Ground pressure: 26.7 kPa Overall length: 4,010 mm Overall width: 1,540 mm Overall height (to top of boom): 1,380 mm Overall height (to top of cab): 2,360 mm Counterweight clearance: 485 mm Minimum ground clearance: 255 mm

Kondisi: bekas, Tahun pembuatan: 2007, 1 Dsdpfx Agsy D T Sue Docg

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: FM.DEC0-00213, berat keseluruhan: 2.200 kg, lebar total: 2.565 mm, panjang total: 4.085 mm, tinggi total: 1.455 mm, Perlengkapan: dokumentasi / manual, Heidelberg / Eurobind 1300D – Automata ragasztókötő gép A Eurobind 1300D egy masszív, automatizált ragasztókötő megoldás, amelyet közepes példányszámú könyvek, katalógusok és magazinok gyártására terveztek. Gép állapota és jellemzői: • Gyártási év: 2013. • Állapot: A gép korának és ipari használatának megfelelően jó, működőképes állapotban van. Rendszeresen karbantartott, teljesen üzemképes és azonnal gyártásra kész. • Vezérlőrendszer: Érintőképernyős kezelőfelülettel szerelt. Műszaki adatok: - Mechanikus teljesítmény: 1 300 ciklus/óra - Leszorítófejek száma: 4 - Könyvtest szélessége: 120 mm – 300 mm - Könyvtest magassága: 145 mm – 360 mm - Könyvtest vastagsága: 2 mm – 45 mm - Ív grammsúly: 60 – 170 g/m² - Borító teljes szélessége: 242 mm – 685 mm - Borító magassága: 145 mm – 370 mm - Elő-/hátsó borító szélessége: 120 mm – 320 mm - Borító grammsúly: 120 – 300 g/m² - Marás mélysége: 0 mm – 3 mm - Max. rakásmagasság: 150 mm (anyagfüggő) - Biegelés: kettős vagy négyszeres - Gerinctől a díszbiegelésig: 6 mm - Működési nyomás: 6 bar - Sűrített levegő igény: 510 Nl/perc (olaj- és vízmentes levegő) - Méretek (hossz x szélesség x magasság): 4 085 mm x 2 565 mm x 1 455 mm Dcjdpfsy Hq T Iox Ag Deg - Tömeg: kb. 2 200 kg

Kondisi: bekas, OMNIFLO Overhead Conveyor System Linear Guide Transport Schönenberger Complete System for Hanging Goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections, optionally cut to length: 1 pc. x 1.00 m 1 pc. x 1.18 m 1 pc. x 1.52 m 1 pc. x 1.54 m 1 pc. x 1.74 m 6 pcs. x 1.80 m 1 pc. x 1.84 m 1 pc. x 2.05 m 1 pc. x 2.25 m 7 pcs. x 2.28 m 1 pc. x 2.46 m Djdpfx Agepvuyrs Djcg 2 pcs. x 2.50 m 1 pc. x 2.50 m 1 pc. x 2.60 m 1 pc. x 2.79 m 5 pcs. x 3.00 m 1 pc. x 3.00 m 1 pc. x 3.34 m 1 pc. x 3.50 m 4 pcs. x 3.64 m 1 pc. x 3.66 m 1 pc. x 3.70 m 1 pc. x 4.00 m 1 pc. x 4.00 m 1 pc. x 4.14 m 1 pc. x 4.26 m 1 pc. x 4.54 m 1 pc. x 4.57 m 1 pc. x 4.64 m 1 pc. x 4.72 m 1 pc. x 4.76 m 1 pc. x 4.87 m 1 pc. x 4.97 m 2 pcs. x 5.00 m 1 pc. x 5.00 m 1 pc. x 5.06 m 1 pc. x 5.14 m 1 pc. x 5.14 m 1 pc. x 5.41 m 1 pc. x 5.59 m 16 pcs. x 6.00 m Switches: 14 pcs. left and 26 pcs. right Curves: various angles and radii, 30 pcs. Incline drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is the unit price, not the total price. Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For a custom, professional consultation, simply get in touch with us. Contact us by telephone or email. Our complete product range can also be found on our website with tailored filter options. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis pendinginan: udara, panjang gelombang laser: 1.064 nm, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. Laser technology has become indispensable in many industries for permanent marking applications. The powerful laser software makes it quick and easy to implement texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without the need for extensive programming knowledge. The software automatically increments serial and article numbers after prior configuration. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, and more, are available. Made in Germany Fiber laser: 30 watts, 20 watts, or 50 watts • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optional larger) • Signal lamp to display operating status Djdpowlc Stsfx Ag Docg • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction unit (incl. activated carbon filter) • Optional: Digital height measuring system • Optional: Autofocus system for automatic focus distance measurement • Marking software EZCAD in German / English (other software available on request) • Pilot laser (simple preview, plaintext preview) • Focus finder (easy focus adjustment) • Max. part height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touchscreen and adjustable keyboard tray • Sturdy aluminum frame • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 697 h, daya: 224 kW (304,55 hp), kecepatan maksimum: 50 km/j, ukuran ban depan: 600/70 R30 | 0%, ukuran ban belakang: 710/70 R42 | 0%, ukuran ban: 710/70 R42, jumlah tempat tidur: 43,

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar total: 600 mm, panjang total: 1.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 150 kg, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, jangkauan kerja: 400 mm, tinggi produk (maks.): 30 mm, masa garansi: 12 bulan, model controller: SPS-Steuerung Siemens Simatic HMI, frekuensi input: 50 Hz, sambungan udara terkompresi: 6 batang, kapasitas beban per penyangga: 50 kg, akurasi pemposisian: 1 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, pencahayaan, penghadang cahaya keselamatan, Feeding and storage system for lightweight items in carrier trays. Tray feed for magazine loading in automated production processes. Specifically designed for surface- or contour-sensitive components. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4-8 seconds) • Maximum tray weight including workpieces: 5 kg • Maximum tray stacker weight: 50 kg • Positioning accuracy: ± 1 mm • PLC control system with operator and monitoring display • ESD configuration • Safety package: light curtain from Leuze for tray stacker • Prepared for AGV communication – Siemens IWLAN client • RFID read-write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact design with minimal space requirements • Flexible adaptation to various machines via multiple interfaces • Low investment costs • Fully equipped • Sturdy construction (solid steel frame, powder-coated) • No machine adapters required Dedpeyycqxofx Ag Docg • Supply voltage: 400V / 50Hz / 3ph • Minimum compressed air connection: 6 bar • Dimensions: 1200 x 600 x 2300 mm (LxWxH)

Kondisi: baru, Tahun pembuatan: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I-axis rotary table) for automatic three-sided machining of profiles made of aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new CNC control based on Windows® with 3D color graphics and simultaneous machining. Maximum machining length: 3,000 mm Maximum clamping length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speeds: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence approx. 5.5 m x 3.1 m x H 2 m Weight approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door Dcsdjy Afxdjpfx Ag Dsg - Rear working area secured by safety fence with access door - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control based on Windows® with 3D color graphics and simultaneous machining

Kondisi: baru, Tahun pembuatan: 2026, Mesin tekuk plat presisi universal manual berat (mesin tekuk ayun) dengan konstruksi besi cor yang sangat kokoh – kondisi baru pabrik Panjang tekuk maksimum: 3.050 mm Ketebalan pelat maksimum: - Baja – plat presisi DC01-A dengan kekuatan tarik sekitar 350N/mm² – 2 mm - Plat aluminium H24 kekuatan tarik sekitar 145N/mm² – 3 mm - Plat seng sesuai DIN EN988 kekuatan tarik sekitar 190N/mm² – 2,5 mm Rahang atas – area bukaan 250 mm – - Dapat digunakan untuk tekukan kotak hingga 250 mm. - Opsional tersedia dengan penggerak rahang atas bermotor. Sudut tekuk maksimal: 135° Area penyesuaian rahang bawah: 90 mm Area penyesuaian rahang penekuk: 90 mm - Mesin ideal untuk pembuatan pipa, segmen pipa, dan bagian radius Dimensi tanpa penahan belakang sekitar 3,6 m x 570 mm x tinggi 1,3 m Dcodpfx Ajy Afgzog Dog Berat: 3.000 kg