Beli Ms-Maschinenbau Gergaji Multirip Poros Ganda bekas (10.834)

Tahun pembuatan: 2024, Kondisi: baru, Log transverse conveyor - Number of chain strands as specified by customer Ncsdjhmp Ibspfx Aa Uot - Length and width as specified by customer - Powerful SEW gear motors - Fully bolted conveyor chain with protective rollers

Tahun pembuatan: 2024, Kondisi: baru, • Chipping height: 240 mm • Chipping width: 540 mm • Chipping length: approx. 25-35 mm • Number of chipping knives: 2 Nedpenyidbofx Aa Uect • Rotor diameter: 600 mm • Rotor speed: 590 rpm • Feed motors: 4 + 3 kW • Main motor: 45 kW / 55 kW / 75 kW • 6,000 mm infeed conveyor belt • 2,000 mm discharge conveyor belt beneath the machine

Tahun pembuatan: 2024, Kondisi: baru, max. cutting height – ø 340 mm min./max. cutting width 80 – 250 mm min./max. side board width 18 – 80 mm Ncodpfxou Izks Aa Ujt max. cutting length 6,000 mm feed speed 5 – 30 m/min saw motors 2 x 55 kW feed motor 4.0 kW width adjustment motor 0.55 kW infeed roller motor 0.75 kW weight 8,000 kg Special Equipment Synchronously adjustable lasers Infeed table extension up to 8,000 mm Automatic width adjustment with 6 fixed positions Equipped with 1,000 mm diameter blades Motorized log rotation device Electronic braking system

Tahun pembuatan: 2024, Kondisi: baru, Maximum cutting height: 160 mm Maximum cutting width: 600 mm Min./max. edging width: 25–300 mm Adjustment time for widths: 0.2–1.0 sec Feed rate: 5–30 (70) m/min Saw motor: 37 kW (higher kW possible) Feed motor: 2.2 kW Saw spindle diameter: 70 mm Weight: 3,500 kg Standard equipment: 1 adjustable bush 1 fixed bush Digital cutting width display Automatic cutting width adjustment Ncsdpfxsu I D Dj Aa Ujt Optional equipment: Electric height adjustment for feed rollers Laser with adjustment device Powered roller conveyors Electronic braking system

Tahun pembuatan: 2024, Kondisi: baru, The plant is available immediately! • Suitable for round timber diameters from 10 cm up to 50 cm • Suitable for round timber lengths from 2 to 6 m • 4-strand infeed conveyor, 6 m long • 4-strand singulator, 2 m long • 4-strand separator, 2 m long • Conveyor with M 112 pin chain featuring protective rollers • Log haul with 2-inch chain and pushers • Special low-noise pushers for quiet transport • Measurement system with 1 mm resolution Nsdpfxsgvu Ale Aa Uoct • Measuring frame with auxiliary heating and sun protection roof • Display of all operating states on a 17” monitor • Fully automatic process control • Various storage options and sorting criteria • 5 ejectors (right/left) driven by SEW gear motors with brake • Spacious, thermally insulated operator cabin • 4 surveillance cameras with flat-screen monitor • Control cabinet including all wiring • Sorting criteria by arrangement

Tahun pembuatan: 2024, Kondisi: baru, - Machine equipped with 3 pairs of feed rollers Nsdpfefvbphox Aa Uoct - Infeed and centering trough - Minimum log diameter: 100 mm - Maximum log diameter: 600 mm - Minimum log length: 2,000 mm - Feed speed: 30 m/min - 5 replaceable carbide knives - 37 kW debarking motor - 9.2 + 5.5 + 7.5 kW feed gearboxes - Total weight: 9,000 kg

Tahun pembuatan: 2024, Kondisi: baru, • Cutting length: 2.5 – 6 m • Max. cutting height: 120 - 450 mm • Cutting width: 80 - 250 mm • Infeed table with centering rollers • Infeed table with log rotation device • Saw with 6-stage width adjustment • Outfeed bridge with 2 powered outfeed rollers • Outfeed bridge with 5 pairs of pressure rollers • Saw blade diameter: 650 mm • 2 x 37 kW lower saw motors Njdpfx Ajgp Su Eea Uect • 2 x 30 kW upper saw motors • 6 saw cuts • 4 kW SEW feed gear motor • Infinitely variable feed speed: 5-30 m/min

Tahun pembuatan: 2024, Kondisi: baru, Maximum cutting length: 3,000–8,000 mm Nodpfoxfzlox Aa Uect Minimum cutting length: 500 mm Maximum cutting height: 80–140 mm Infinitely variable feed rate: 10–30 m/min Saw motor power: 4.0–7.5 kW Feed motor: 1.5 kW Number of saw carriages: 2–6 Weight: 1,000–2,500 kg

Tahun pembuatan: 2024, Kondisi: baru, - 340 mm cutting height - 70-250 mm max. cutting width - 500 mm clearance width Nsde E Rg Sopfx Aa Uect - 6000 mm cutting length - 3-20 m/min feed speed - 2 x 18.5 kW saw motors - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1,300 kg weight

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Good day, We are offering our very well-maintained cross-cut saw from MS Maschinenbau. Technical specifications: - Cutting lengths between 600 mm and 3000 mm - Workpiece thickness: min. 3 mm – max. 100 mm - Feed rate: 5–30 m/min, infinitely variable - Roller conveyor included Nodpfxjtykw Ss Aa Uect The condition is as new. If interested, the machine can be tested on site. If you have any questions, please feel free to contact us.

Kondisi: sangat baik (bekas), Catalogue number 7805 TECHNICAL DATA - Track width: 340 mm - Shaft width: 340 mm - Disc bore diameter: 80 mm - Discs mounted on upper shaft: 350 mm - Discs mounted on lower shaft: 300 mm - Maximum cutting height: 200 mm Ncsdpfxoy At Rhe Aa Ust - Minimum workpiece length: 700 mm – Upper section - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Shaft with saw blades - 3 smooth pressure rollers – Lower section - Track - Shaft with saw blades - Track - Infinitely variable feed speed - Main motors: 2x approx. 55 kW - Feed motor: 3 kW - Electric lifting/lowering of body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2x200 mm - Dimensions (L/W/H): 2700x1800x2150 mm - Weight: approx. 5000 kg ADVANTAGES – German manufacture – Double-shaft – 2x55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Nsdpfx Aaoxnlgcj Ujct Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, New! Completely stainless steel 2 speeds 2 directions of rotation 1.8 kW – 2.5 kW Safety lid With CE marking Suitable for loading with “Easy Connect” Easy to clean Ncjdsy Tuq Depfx Aa Uet Hinged safety lid External dimensions (L x W x H): 1,676 x 830 x 1,428 mm (open lid: H: 1,985 mm)

Kondisi: bekas, Gergaji sudut ganda RAPID Tipe DGL 5000 / 500 Perlu perbaikan - kontrol tidak berfungsi Tahun pembuatan 1993 Panjang potong 5000 mm Panjang potongan terpendek 350 mm Diameter mata gergaji 500 mm - kontrol tidak berfungsi Kebutuhan ruang P x L x T 7200 x 1700 x 1850 mm Berat 1250 kg Kami sedang membersihkan tempat Nedpfsyxy S Djx Aa Ujct Mesin harga terjangkau - ideal untuk ekspor

Kondisi: baru, new! Ncsdjy Sz Iyepfx Aa Ujt completely made of stainless steel 2 speeds (20 and 40 revolutions per minute) 2 directions of rotation 3.7 / 4.5 kW foldable inspection steps safety lid front discharge via discharge flap with CE marking External dimensions (L x W x H): approx. 1,970 x 1,000 x 1,750 mm (with lid open: H: 2,250 mm) Suitable for loading with “Easy Connect” Loading height approx. 1,450 mm Drum dimensions (L x W x H): approx. 1,000 x 765 x 665 mm + Loading system for standard trolleys

Kondisi: sangat baik (bekas), catalog no. 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum element width: 700 mm - Working width of the saw shaft: 650 mm - Maximum saw blade diameter: 400 mm - Blade bore diameter: 70 mm From above: Ncjdpfey R Dpqex Aa Uot - Anti-kickback fingers - 2 driven, toothed feed rollers From below: - Anti-kickback fingers - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Continuously variable feed speed control via inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Manufactured in Poland – Used machine, condition: very good Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 PLN/EUR; price may fluctuate) * The company MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to allow product identification. We only resell goods previously released on the market by the manufacturer. We have no business relationship with the manufacturer.

Kondisi: siap digunakan (bekas), Maschine Mischer, Doppelwellenmischer, Z-Mischer Nedpfxsu Hknks Aa Usct Mischmaschine, Doppelwellenmischer, Z-Arm-Mischer, Gebrauchtmaschine Gesamtmaße: 1150 x 750 x 1520 mm Gewicht: 355 kg Behältergröße: 530 x 500 x 400 mm Elektrische Angaben: 400V

Kondisi: baik (bekas), Tahun pembuatan: 1996, Abstand zwischen den Sägen bei 90° max.: 4000 mm Schnitthöhe bei 90°: 200 mm Ncsdpfx Aogixvwsa Uet Schnittbreite: 130 mm Leistung: 5,1 kW Gewicht: 1260 kg

Kondisi: baik (bekas), Tahun pembuatan: 2008, Hersteller: EBG-TECH Typ: BMW N-63 Baujahr: 2008 Max. Scheibendurchmesser: 300 mm Ncsdpfx Aef Ecwzoa Uet Abmessungen (L x B x H): 1900 x 1200 x 2900 mm Gewicht: 1750 kg

Kondisi: bekas, #001 Ncedpfxsyztz Ro Aa Ujt

Kondisi: bekas, Panjang potongan sekitar 2.200 mm Sudut kemiringan 45° - 90° Ukuran benda kerja maks. 50 x 70 mm Nedpow D Dfxefx Aa Ujct Gergaji potong sudut ganda Striffler Tipe 2750-E untuk pemotongan sudut dan potong dengan presisi pada profil kayu, lis, dan bingkai. Mesin ini sangat cocok untuk produksi massal pada pembuatan jendela, pintu, dan furnitur, berkat dua unit gergaji yang dapat diputar secara pneumatis dan pengaturan elektronik. Data lebih lanjut: Lihat PDF

Kondisi: sangat baik (bekas), CATALOG NUMBER 6911 TECHNICAL DATA - Track width: 350mm - Shaft width: 370mm - Maximum cutting height: 200mm Maximum blade diameter: - Upper shaft: 340mm - Lower shaft: 300mm - Blade bore diameter: 80mm From above: - Ejectors - 2 pressure slip rollers - Pressure unit - Saw shaft 37kW - 2 smooth slip rollers From below: - Infeed table + guide bar - Ejectors Nodpfx Aaoy Rtaxo Usct - Track - Saw shaft 37kW - Track - 1 outfeed shaft, slip type, smooth - Pneumatically pressed rollers - Maximum blade diameter: 300mm - Electric height adjustment of upper body up/down: 1.1kW - Automatic central lubrication - Electrically controlled variable feed speed adjustment: 3kW - Extraction connector diameter: 230mm, 250mm - Dimensions (LxWxH): 3000x2300x1900mm - Weight: approx. 4500kg ADVANTAGES – Made in Italy – Double-shaft design – Used multi-blade saw, in very good condition Net price: 168,900 PLN Net price: 40,200 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), jenis bahan bakar: diesel, warna: hitam, berat operasi: 500 kg, berat muatan maksimum: 800 kg, tinggi angkat: 3.800 mm, konfigurasi gandar: 2 gandar, Tahun pembuatan: 2024, nomor mesin/kendaraan: WD1-800, WD1-800 Twin-Wellen-Mischer mit Austrag – Beinlänge 3800 mm Fernbedienung --- Technische Daten: Modell: WD1-800 Twin-Wellen-Mischer Chargenvolumen: 500 L Kapazität: 800 L Leistung: 25 m³/h Körnung: 60–80 mm Paddeldrehzahl: 26 U/min Anzahl Mischpaddel: 2 × 7 Leistung Mischmotor: 18,5 kW Leistung Hubwerksmotor: 5,5 kW Leistung Wasserpumpe: 1,1 kW Korbhebegeschwindigkeit: 18 m/min Abgabehöhe: 3800 mm Abmessungen: 4900 × 2900 × 4200 mm --- Ausstattung: Ncjdpfx Aaev H D S Eo Uet Mischergetriebe Mischmotor Hubwerksgetriebe Hubwerksmotor Schmiersystem – Ölpumpe Wasserpumpe Innenverkleidung Pneumatische Entleerung Rahmen Tragkonstruktion – Stahlbeine Austragskorb Arbeitsbühne Hubschiene Handlauf Leiter

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, de-to-hu Nodpfx Astqmmdea Uect

Kondisi: bekas, Tahun pembuatan: 1991, nomor mesin/kendaraan: DS11, Fungsionalitas: berfungsi sepenuhnya, daya: 9 kW (12,24 hp), diameter mata gergaji: 370 mm, Perlengkapan: pelindung bilah gergaji, de-baeuerle-ds11-01 Nodpfey Tphksx Aa Uect