Beli Pressta Eisele Akf 200 St bekas (30.050)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1989, nomor mesin/kendaraan: 4867, pressta-eisele-stanzautomat-he-40-s Nljdpfjy Tizkox Aa Ueb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1559, diameter mata gergaji: 550 mm, panjang pemakanan sumbu X: 800 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, Rentang pemotongan baja bulat pada 90°: 190 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.850 rpm, ketinggian potong (maks.): 150 mm, berat keseluruhan: 1.650 kg, panjang bagian (min.): 3 mm, panjang bagian (maks.): 4.000 mm, kecepatan mata gergaji: 2.850 rpm, tegangan masuk: 400 V, penggerak gergaji: 7.500 W, diameter pemotongan: 270 mm, lubang pisau gergaji: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Maximum profile width 270 mm, Siemens S7 control with touch display incl. piece counter Includes CPU 315 and a Flexisoft, quantity multiplier for processing material bundles Cycle time indication in seconds, chain dimensions, includes reversing device for sections up to max. 4 m length Automatic shut-off via limit switch at the end of the material, error diagnosis, incl. IXON router for VPN connection, see data sheet Motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping device from bottom to top, on both infeed and outfeed sides of the saw head, cutting gap expansion on both sides of the saw blade, electronic material feed unit, 800 mm feed length, with ball screw spindle and servomotor, including pneumatic horizontal and vertical clamping units. The profile support area in the feed section is equipped with a lift/lowerable roller, minimum remainder length from 75 mm (profile-dependent), horizontal and vertical clamping pressure reduction with 6 pressure regulators, cycle spray device with level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame lined with insulation mats on the inside 2 extraction nozzles Ø 100 mm, safety guard over the saw head and the feed unit, 740 mm roller conveyor with reach protection on the infeed side, 450 mm Pertinax table top with reach protection on the outfeed side Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be swung out for easy emptying 2 outlets with 100 mm hose adapter, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow 2,600 m³/hr, negative pressure 30 mbar, with fan snail housing above the extractor Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 db (A) Nljdpfxey Dtpmj Aa Ujb Selector switch for continuous operation or operation controlled by the saw, without electric cable, paintwork: RAL 7035 / 9016

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, PRESSTA CYKLON D mesin obeng otomatis dua kepala dijual lengkap dengan semua aksesorinya. Penawaran paket: jika Anda juga membeli lini pengelasan WM740 dan pusat pemesinan SMC350 yang ada di daftar kami, harga total adalah 180.000 EUR. Nljdjyziu Topfx Aa Uob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, 74bc5989 Nedpfx Aasy Naz To Ujlb

Tahun pembuatan: 2009, Kondisi: bekas, Penggerak dengan 3 motor milling, menghasilkan struktur yang sangat stabil (profil baja dapat dikerjakan dari 3 sisi dalam satu penjepitan). Penguncian elevasi motor horizontal mencegah tergoresnya profil saat memasukkan dan mengeluarkan benda kerja. Pemrosesan lebar profil hingga 300mm dimungkinkan (misal: kotak surat), hanya dengan motor milling vertikal. Eksekusi: Nedpfx Aajy Nm Ers Uelb dengan 1 motor milling vertikal dan 2 horizontal, penjepitan benda kerja secara pneumatik dengan 2 silinder penjepit horizontal, 3 nozel semprot pneumatik, Area milling motor vertikal, panjang/kedalaman: 365 x 230 mm, Area milling motor horizontal, panjang/tinggi: 250 x 100 mm, Tinggi profil maks.: 150 mm, Pengoperasian melalui saklar dan 4 tuas manual.

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, ■ Punching machine, complete with base frame ■ Hydro-pneumatic drive ■ Operation via foot valve ■ Maximum stroke length: 40 mm ■ 25 double strokes per minute ■ Maximum installation height: 250 mm ■ Throat depth: 130 mm ■ Throat depth with rotary table: 90 mm ■ Table height: 950 mm Nledoy Hriwepfx Aa Ueb ■ Ram force: 90 kN at 10 bar

Kondisi: sangat baik (bekas), Mesin penyambung sudut Pressta Esiele PV10 P Nodpol Skl Iefx Aa Uslb pengiriman dalam UE ~350 euro

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1587 / 1588, diameter mata gergaji: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Nledpfsyyz Txex Aa Ujb Saw Unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching Unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. Punching is performed vertically from above, with punch tool cassettes accommodating up to 8 profiles simultaneously. Material Feed: The material is fed via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per stroke. Control System: Modern versions are often equipped with a Siemens S7 control unit featuring a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and offers the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on equipment). Dimensions (Saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also customized financing options tailored to your needs. Whether down payment, installment plan, or individual financing models – together we will find the right solution. Upon request, we will also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and on-schedule process so you don’t have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding offer. We will advise you personally and professionally. Subject to prior sale, modifications, and errors!

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Gergaji Ausklink untuk pemotongan sudut dan pemotongan miring. Mesin ini memiliki 2 diameter mata gergaji masing-masing 500 mm. Dilengkapi dengan alat penjepit pneumatik. Gerakan maju bersifat hidropneumatik dan dioperasikan dengan kendali dua tangan. Pemberhenti material dapat diputar dengan titik pengunci serta dilengkapi tampilan digital. Tinggi dan sudut potongan dapat disetel secara motorik dan dilengkapi tampilan digital. Maks. tinggi profil: 280 mm Maks. lebar potongan: 300 mm Maks. tinggi potongan: 185 mm Maks. kedalaman potongan: 185 mm Nsdpfx Aajyzcpde Uelb

Tahun pembuatan: 1998, Kondisi: bekas, Long-cut saw for cutting aluminium profiles with feed pusher, in very good condition. Max. cutting length: 700 mm Nljdpfx Aajwx I Hve Ujb Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Maximum feed pusher stroke: 6,200 mm The machine is currently dismantled and stored in our warehouse. Further technical data available on request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, 2013 metal circular saw. This PRESSTA EISELE Profilma 400 V features a Ø400 mm saw blade diameter and a powerful motor with approx. 12 kW output. It offers automatic material feed and a pneumatic clamping system for efficient operation. If you are looking for a high-quality saw, you should consider the PRESSTA EISELE Profilma 400 V we have for sale. Please contact us for further details on this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500-5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Saw feed direction: Linear feed from top to bottom • Cutting principle: Cross-cut • Material feed: Automatic servo feed with repeat strokes for longer cut lengths • Material separation: Before saw blade retraction (no post-cutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force individually adjustable; interchangeable plastic/PVC jaws • Control: PLC-based; operation via control panel with display • Features: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostic and error messages; machine status display • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor power: up to 22 kW (multi-stage motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment Nlsdpeyyxxfsfx Aa Usb • External chip extraction system (to connect to Ø100/Ø160 mm ports)

Tahun pembuatan: 1996, Kondisi: bekas, hydro-001 Nljdpfx Aasyxpw No Ueb

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), Fungsionalitas: tidak berfungsi, Mesin punching hidrolik kompak dengan rangka C dan gaya punching 160 kN untuk aplikasi presisi pada penampang profil yang lebih kecil. Konstruksi rangka yang kaku terhadap puntiran memastikan hasil punching yang akurat pada aluminium, baja, atau plastik. Njdsy Agqnopfx Aa Uelb

Tahun pembuatan: 2009, Kondisi: bekas, Sägeblattdurchmesser vertikal: 600 mm Sägeblattdurchmesser horizontal: 500 mm Ausklinkbreite: bei 90° Verarbeitung von Profilen bis zu 300 mm, Spitze Gehrungen bis 30° Profilhöhe max. 280 mm Ausklinktiefe: bei 90° horizontal bis 185 mm / bei 90° vertikal bis 230 mm Materialanschlag: schwenkbar 30° - 90° - 45° Materialanschlag schwenkbar mit Rastpunkten und Anzeige im Display Programmsteuerung zur automatischen Einstellung der Klinkhöhe, der Winkel sowie der Ausklinköhe Nlodeywtqdepfx Aa Usb Bis zu 6 Programme sind speicherbar Hydropneumatischer Materialvorschub über 2-Hand-Bedienung Pneumatische Materialspanner Kühlmittelschmierung

Tahun pembuatan: 2006, Kondisi: baik (bekas), Untuk pengerjaan profil aluminium dan PVC dalam konstruksi fasad dan struktur Pemotongan sudut pada 3 bidang, juga dapat digunakan sebagai gergaji pemotong miring Pemrosesan profil hingga lebar 300 mm pada 90°, pemotongan sudut tajam hingga 30° Kedalaman pemotongan horizontal hingga 185 mm dan vertikal hingga 230 mm pada 90° Lebar pemotongan pada 90° 300 mm, tinggi profil hingga 280 mm Nsdpsyz T A Uefx Aa Uslb Pengaturan tinggi pemotongan secara motorik, posisi dengan tampilan digital elektronik Rentang putar mata gergaji vertikal 60° - 90° - 25° (depan/tengah/belakang) secara motorik, penempatan dengan tampilan digital elektronik Rentang putar mata gergaji horizontal dengan mata gergaji vertikal 45° - 90° - 45°, secara motorik, penempatan dengan tampilan digital elektronik

Kondisi: baik (bekas), Tahun pembuatan: 1995, nomor mesin/kendaraan: 9131, Penawaran 26050 Data teknis: - Dimensi mata gergaji - vertikal: 400 x 3,5 x 40 mm - Dimensi mata gergaji - horizontal: 400 x 3,5 x 40 mm - Area pemotongan / kedalaman pemotongan vertikal: 135 mm - Area pemotongan / kedalaman pemotongan horizontal: 105 mm - Lebar pemotongan pada 90° hingga: 280 mm - Lebar pemotongan pada 30° hingga: 100 mm - Mata gergaji vertikal dapat diputar secara manual 90° - 30° menggunakan handwheel - Dapat digunakan sebagai gergaji pemotong tanpa mata gergaji horizontal Nlsdpeyz Tqrefx Aa Ueb - Stop profil yang dapat diputar 30° - 90° - 30° - Penjepit material pneumatik - Perangkat penyemprotan pendingin - Sambungan udara: 6 bar - Penggerak: 400 V / 2 x 2,2 kW / 2800 rpm - Kebutuhan ruang kira-kira: P 2200 x T 1600 x L 1400 mm - Berat kira-kira: 800 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, vollautomatische-bedienung-saegemaschine Nedsyvtyvopfx Aa Uelb

Kondisi: bekas, Hydropneumatic operation Max. punching height: 90 mm Stop travel: 100 mm Punch stroke: 20 mm Nodpfx Aew Inudsa Ujlb Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 380 kg, Dimensi PxLxT 950 x 800 x 1150 mm Berat 350 kg Metode kerja hidropneumatik Tekanan operasi pneumatik 6 sampai 8 bar Konsumsi udara 10 liter per langkah Gaya tekan 35 kN pada 7 bar Koneksi udara R 1/4'' Langkah punch 20 mm Langkah balik 100 mm Nedpfoyl R T Dox Aa Uelb Tinggi punch maksimal 120 mm Tinggi profil maksimal 120 mm

Kondisi: baik (bekas), Tahun pembuatan: 1993, Mitre saw, saw unit right/left, double mitre saw, crosscut and mitre saw, double-end profiler -Manufacturer: Emmegi, Pressta Eisele, Double Mitre Saw Type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: swiveling 45° -Saw blade: Ø 500 mm Nsdpfx Ajtxkprja Uslb -Cutting data 90°: Cutting height 350 mm, cutting width 160 mm -Cutting data 45°: Cutting height 260 mm, cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Kondisi: baik (bekas), Commissioning trolley, rack trolley, paint drying trolley, compartment transport trolley, transport trolley, window profile trolley - Quantity: 1 commissioning trolley available - Total length: 1,750 mm - Total depth: 1,020 mm - Total height: 1,670 mm Nlodpfeb Hw Dbex Aa Ueb - Lower support: 720 mm - Support height: 1,400 mm - Weight: 62 kg

Tahun pembuatan: 1999, Kondisi: bekas, Saw blade diameter, vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swiveling material stop with locking points and digital display Njdpfsvmz R Sox Aa Uelb Notch height motorized adjustable with digital readout Motorized adjustment of angles with digital display Hydropneumatic material feed via two-hand operation Pneumatic material clamps Coolant lubrication

Tahun pembuatan: 2023, Kondisi: siap digunakan (bekas), An aluminium mitre saw by Eisele, including a mobile extraction unit from AS Sägetechnik, is available. 1) Mitre Saw Pressta Eisele GS 600, Year of manufacture: 2023, Saw blade diameter: 600 mm, Indexing points: 22.5° / 45° / 90°, Mitre adjustment: 20° / -90° / -20°, Material stop shift: 200 mm, Working height: 970 mm, Extraction port diameter: 100 mm, Weight: approx. 650 kg. Nledpfx Aaow D Et Rj Usb 2) Mobile extraction unit AS Sägetechnik 460VT-2, Extraction port diameter: 100 mm, Airflow: 1,400 m³/h, Machine dimensions (L/W/H): approx. 750 mm / 800 mm / 1,800 mm, Weight: approx. 100 kg. Documentation available. An on-site inspection is possible.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, diameter mata gergaji: 550.500 mm, The machine is in perfect technical condition and has seen very little use. Nedpfx Aajvtarno Uolb Designed for machining aluminium and PVC profiles. Mitre cuts possible on 3 levels; can be used as a notching saw. Manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, triple-sided mitre. Profile processing up to 300 mm, width up to 90°; mitre cuts up to 30°. Horizontal notching depth up to 185 mm, vertical up to 210 mm at 90°. Cutting width at 90°: 300 mm; maximum profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Vertical saw blade swivel range: 30° – 90° – 30° (front/centre/rear), manual with digital display positioning. Material stop (table surface) can be manually swivelled left and right within the range 30° - 90° - 30°, with positioning via measuring scale. Material depth stop adjustable manually using the sliding carriage and manual clamp, positioning via digital display.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, High-performance automatic saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance automatic saw with fully automatic operation * Very high cutting accuracy * Short cycle times * Burr-free sawing * High reliability * Low maintenance Suitable for aluminum and plastic, ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous application: Used for cutting corner connectors. Very well-maintained, ready-to-use condition. Technical Data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversing possible - Cut-off length: from 8 mm depending on the profile - Remaining piece length: from 90 mm depending on cut-off length - Operating pressure: 6 - 8 bar - Power supply: Standard 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel Nodpfxow D T Uio Aa Uslb - Fully automatic bar feed - Roller conveyors - Extraction unit - Chip bunker - Various accessories - CE marking No guarantee for completeness or correctness of technical specifications or equipment details. Subject to prior sale.