Beli Sander Kontinu Dengan Sabuk Lebar bekas (7.687)

Kondisi: sangat baik (bekas), CATALOG NUMBER 7612 Technical specifications: - Maximum workpiece width: 1030 mm - Maximum workpiece height: 150 mm – Upper section: - Metal pressure roller - Split metal pressure roller - Unit (profiled rubber calibrating roller + shoe + metal roller) - Smooth rubber slip roller – Lower section: - Infeed roller - Conveyor belt - Outfeed slip roller - Pneumatic belt oscillation with photocell control - Electric table lifting Iajdpfxsylbmnj Afijr - 2 feed speeds - Main motor: 11 kW - Brake - Precision adjustment handwheel for sanding height - Feed motor: 0.33 kW - Table lifting motor: 0.12 kW - Operating pressure: 8 bar - Dust extraction port diameter: 150 mm - Dimensions (LxWxH): 1500x1750x2000 mm - Weight: 965 kg ADVANTAGES – Made in Germany – Original paint (not repainted) – Used sander, in very good condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuation)

Kondisi: baru, Tahun pembuatan: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. paint intermediate sanding configuration Special price for display machine – showroom machine – - Robust, space-saving wide belt sander for the highest demands. - Constant working height due to upper part adjustment - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller with proven hardness - Stepless height adjustment of the contact roller based on a sanding grit scale - Electric raising/lowering of the contact roller according to unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10 degrees - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between sanding units and at outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized fine height adjustment with digital display - Belt tensioning, control and oscillation pneumatic Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation over 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece thickness overrun protection with immediate feed stop and automatic lift-up - Infinitely variable chip removal - Electronic feed control on the control panel, stepless from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor control - Workpiece support with roller at infeed and outfeed - Enormatic: Fully automatic quick setup and feed activation - eco power-saving mode - Error diagnostics Iajdjk Dpp Sepfx Afior - Pass-through height up to 210 mm (up to 18.5 kW) - Sanding belt size: 1350 x 2000 mm Perfect - Equipment: High-quality swivel-mounted plexiglass control panel - 10" touch screen - Industrial control - Automatic pressure control and memory of sanding pad segments - Electronic compensation for sanding belt grit size - Job and operating hour counter Lacquer Equipment: - Infinitely adjustable sanding belt speed on 2nd unit - Jet nozzles for sanding belt cleaning on 2nd unit, usage-controlled - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Foldable outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air-jet cleaning with fan Location: 54634 Bitburg - available immediately -

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, tinggi penggerindaan: 200 mm, daya: 11,03 kW (15,00 hp), kecepatan sabuk penggerinda: 18.000 mm/dtk, panjang sabuk penggiling: 2.620 mm, lebar sabuk penghalus: 1.370 mm, frekuensi input: 50 Hz, tegangan masuk: 400 V, Further technical data Feed speed: 2.8 - 20 m/min The new Format4 wide belt sanders from the findustry line are particularly impressive in industrial applications due to their individually configurable assembly of units. Tailored precisely to specific applications and operating environments, the machine can be equipped with two, three, or four processing units. This high degree of customization ensures all requirements regarding surface quality and processing efficiency are met. Maximum operator comfort for industrial use The clearly structured touchscreen control is intuitive to operate. All machine functions are clearly and graphically displayed on the digital screen. The clearance height can be adjusted to a tenth of a millimeter directly from the control panel at the push of a button. Automatic thickness measurement simplifies setting the machine to the desired workpiece thickness. The workpiece can be measured without additional measuring devices and the thickness is then transmitted “wirelessly” directly to the machine. The fixed infeed table height of 900 mm allows for easy and fatigue-free operation. A vacuum table, roller table extensions on the infeed and outfeed sides, as well as optional pressure shoes on the sanding units, ensure optimal comfort and ideal processing conditions for workpieces of any format. Additional equipment: Ijdpfx Afoxtpydsisar 10E LACQUER cross sanding unit ESC instead of 1st contact roller 20A 2nd contact roller unit 22 2nd sanding roller in 85° Shore hardness 30E LACQUER superfinish unit ESC instead of 3rd contact roller 39 Switching contact for slide valve control (price/piece) *6 51 Soft start for 15kW (20hp motor) 59B Control unit with 15" color touchscreen 63 Scotch Brite brushing unit at machine outfeed 71 Oscillating cleaning blower for workpiece and conveyor 72 Ionizing bar at machine outfeed 73 Vacuum table with 4kW (5.5 hp) blower 74 Inverter for vacuum blower for variable vacuum 83 Sanding height 200mm instead of 170mm 84 Optimized control software for special applications 87 ESC workpiece detection sensor with 50 segments 201 2nd motor with 15 kW motor power Further information Workpiece height: 3 - 170 mm Constant infeed height - fixed table: 900 mm Grooved sanding roller: Ø 250 mm Including delivery and installation within postal code areas 71,72,73,77,78,79,86,87,88,89

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.100 mm, tinggi penggerindaan: 170 mm, daya: 14,71 kW (20,00 hp), panjang sabuk penggiling: 1.900 mm, lebar sabuk penghalus: 1.100 mm, frekuensi input: 50 Hz, tegangan masuk: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta start - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment via the control panel - Infinitely variable feed speed adjustable from 2.5 – 18 m/min via inverter from the control panel - Hand guard and workpiece thickness limiter - Endless honeycomb-structured conveyor belt - Automatic conveyor belt centering - Control unit with 7” color touchscreen - 1st unit: rubber-coated, profiled contact roller with 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width allows the processing of multiple workpieces independently for perfect veneer sanding. The standard, time-controlled cleaning blower ensures maximum sanding belt life, especially when sanding lacquer or using very fine grit. Iaodpfx Afsvf D S Asior - Digital grit compensation - Mechanically pre-tensioned rubber pressure rollers - Electronic-pneumatic sanding belt oscillation - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in machine frame - 15 kW (20 HP) motor with variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch-Brite brush unit at the machine outlet, D=150 mm - Switching contact for slide-valve control. Extraction shut-off valves can be operated accordingly. Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 1.350 mm, SCM wide-belt calibration and fine sanding machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./Max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Iajdpfstwqn Sex Afior Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard Equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore—1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore—2nd position - Hard sanding pad with manual working height adjustment - 1st unit motor power: 11 kW (15 HP) - Electronic ammeter for the main motor to display power consumption - Electronic display for working height - Electronically controlled abrasive belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before the first unit - 60 Shore rubber feed belt - Roller table with two rollers at the infeed and outfeed of the working table - Feed belt with two speeds: 4.5 / 9 m/min with gear motor - Automatic belt centering Includes the following special accessories: 1 pc. Version "B" for RCS with: pneumatic activation/deactivation of roller 1st unit “R” + pneumatic activation/deactivation of roller 2nd unit “CS” + "MESAR" elastic segmented sanding shoe + pneumatic activation/deactivation of the sanding shoe unit + electronic programming unit "LOGIC 50" + electronic working height adjustment 1 pc. CE safety regulations 1 pc. Roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" helical-ribbed steel contact roller 1st unit 1 pc. Main motor 15 kW 1 pc. Abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. Door with inspection window at the rear 1 pc. Logic SC control

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Technische Daten: - Arbeitsbreite 1350 mm - pneumatische Oszillation - Vakuumtisch - Stand-alone-Maschine (Tischhub/Tischsenkung) 1. Kombi-Aggregat: Iedpfevdtxisx Afisar - Motorleistung 18,5 kW - Stahl-Kalibrierwalze - stufenlose Verstellung der Bandgeschwindigkeit - Segmentiertes Druckschuh-Pad (52 Segmente à 26 mm) 2. Kombi-Aggregat: - Segmentiertes Druckschuh-Pad (52 Segmente à 26 mm) - Motorleistung 7,5 kW - stufenlose Verstellung der Bandgeschwindigkeit - Bürste am Austrag des Materials - stufenlose Verstellung der Vorschubgeschwindigkeit - pneumatische Bandreinigung

Kondisi: sangat baik (bekas), 7431 Iasdpfjyh H Tvox Afisr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1977, Wide belt sanding machine Bütfering see pictures Machine is immediately available Iajdpfendcctex Afisr The machine was in use in production without any issues until just a few days ago, but was used only very rarely.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A11108GM1, Wide-Belt Sander Costa K6 CCC 1350 Year of manufacture: 2001 Iasdpfx Afewczkieisr Technical condition: very good, after a complete overhaul at COSTA in 2023 The Costa K6 CCC 1350 wide-belt sander from 2001 is a robust industrial machine designed for sanding and calibration of wooden surfaces. This machine features a fixed table and a movable working section with rollers. Constant working height: 890 mm, allowing installation in a production line. Additionally, the machine is equipped with a vacuum table powered by its own fan. Key technical specifications: - Sanding width: 1350 mm - Number of sanding units: 3 (steel calibration roller, 2x rubber roller) - Cleaning or sanding brush - Sanding belt length: 3250 mm

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, DMC Polisand 110 RP wide belt sander Year: 1998 Lacquer wide belt sanding machine Installed total power: approx. 23 kW Sanding width: 1100 mm Workpiece thickness up to approx. 170 mm Motorized height adjustment with digital readout Vacuum conveyor belt, F.LLI FERRARI vacuum unit with 4 kW motor power Feed motor power: 1.50 kW Unit 1: Grooved rubber sanding roller with blower, 8.8 kW Isdpfev Ivuuex Afiear Unit 2: Sanding pad with blower, 15 kW 380 V / 50 Hz Weight: 2300 kg Dimensions: 2.45 m x 1.85 m x 2.0 m

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 5.500 kg, sambungan udara terkompresi: 6 batang, panjang meja: 1.600 mm, frekuensi input: 50 Hz, tegangan masuk: 400 V, lebar benda kerja (maks.): 4.000 mm, panjang benda kerja (maks.): 1.500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing of stainless steel sheet surfaces Wide belt grinding machine with two top-mounted wide belt sanding units and one brush unit Dry processing machine with Wandres production cleaning brush The roller table shown in the gallery image is NOT included with the aforementioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Setting accuracy: 0.01 mm Flat feed carpet Feed speed: 4-20 m/min Electricity: Main motor 1st unit frequency-controlled 22 kW Main motor 2nd unit frequency-controlled 22 kW Main motor 3rd unit frequency-controlled 15 kW Feed motor 3 kW Electrical connection 400 V Frequency 50 Hz Compressed air: Required air pressure: 6 bar Air requirement per unit: 30 l/min Wandres air requirement: 235 l/min Ijdpfx Ajq Tp H Hsfioar Dust extraction PER unit: Required airflow at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Upon request, extraction systems and/or installation services can also be offered. The roller table shown in the gallery image is NOT included with the aforementioned machine!

Kondisi: baik (bekas), Tahun pembuatan: 2003, berat keseluruhan: 1.900 kg, Paoloni Kalibra 30 Iaedpfxjrumipo Afier - Maximum sanding width: 110 cm - 15 kW main motor - First unit equipped with a steel roller - Second unit with a pad shoe and a rubber-coated roller - Shoe control from the operator panel/table - Weight: 1,900 kg The machine operates very well.

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, Unit pengamplasan dengan roller kontak Unit DIAGONAL dengan bantalan pengamplasan bersegmen (lebar segmen 35 mm) 2 motor dengan daya 15 & 11 kW, 400V Tinggi bukaan 200 mm Tinggi kerja konstan (penyesuaian bagian atas mesin) Ukuran sabuk amplas 1350 x 2000 mm Otomasi pengaturan ketebalan ENORMATIC Kontrol PLC dengan layar sentuh dan penghitung jam operasi Mesin dalam versi untuk intermediate lacquer sanding Pengangkatan/pengurangan roller kontak secara pneumatik Perangkat vakum lengkap dengan kipas terintegrasi Iedpfox Eh Svox Afisar Umpan kontinu yang dapat diatur melalui layar sentuh Kecepatan sabuk amplas dan pembersihan sabuk dapat diatur pada unit kedua Rol penggerak bantalan pengamplasan berlapis karet Dimensi mesin sekitar 1.800 x 1.800 x 2.100 mm (P x L x T) Berat sekitar 2.800 kg

Kondisi: baik (bekas), de-DE Iaodpfxsv A Ta De Afijr

Kondisi: bekas, BOGMA mesin amplas pita lebar, Tipe: KFY-M, Nomor: A0091, 2 unit: agregat pertama rol karet, agregat kedua sepatu pengamplasan Iodpfxjxrzuds Afiear

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, lebar penggilingan: 650 mm, Perlengkapan: Pelat tipe tersedia, Kündig Botop, sanding unit top roller, shoe pneumatic, sanding unit bottom roller, shoe pneumatic. Machine has been completely overhauled: new conveyor belt, new rollers. Iajdpfx Afsvmt D Roijr

Kondisi: sangat baik (bekas), Technical data: - Working width: 1030 mm - 1 combination unit with pneumatic pad - Roller diameter: 120 mm - Maximum workpiece height: 160 mm - Sanding belt dimensions: - 2 feed belt speeds - Extractor connection diameter: 2x160 mm - Electric height adjustment - Digital display - Safety switch - Main motor power: 8 kW - Voltage: 380 V - Manufacturer: C.B. Overall dimensions: - Length: 1450 mm Iajdet Hfvzjpfx Afier - Width: 1700 mm - Height: 1850 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1994, Wide belt sanding machine Iaedpfxovuza Nj Afisr Manufacturer: Bütfering Model: AWS 2 KC 1100 Year of manufacture: 1994 Working width: 1,100 mm Max. workpiece height: 150 mm Number of sanding units: 2 Sanding roller power: 15 kW Sanding pad power: 11 kW Feed motor power: 1.5 kW Feed speed: 3 - 15 m/min, infinitely variable Weight: approx. 3,300 kg Dimensions: 1,750 x 2,210 x 2,280 mm

Kondisi: bekas, Technical data: Working width: 1100 mm 1 steel calibration unit Roller diameter: 210 mm 2 rubber units Roller diameter: 210 mm Workpiece height: 160 mm Variable feed belt speed Extraction nozzle diameter: 160 mm Electric height adjustment Digital display Emergency stop switch Main motor power: 13 kW Iaodori Sm Depfx Afisr Voltage: 380 V Overall dimensions: Length: 1770 mm Width: 1580 mm Height: 2100 mm

Kondisi: baru, BULDOG 3 R 950 is a machine designed for professional manufacturing facilities and skilled craftsmen. Its excellent build quality ensures long-lasting, trouble-free operation and a high level of occupational safety. The sander is exceptionally stable and, above all, highly efficient. Technical specifications: - Working width: 950 mm - Minimum workpiece height: 3 mm - Maximum workpiece height: 160 mm - Sanding belt size: 950 x 1900 mm - Sanding belt speed: 18 m/s - Feed belt speed: 4.5/9 m/min - Air consumption: 20/180 L/min - Air pressure: 5.5 bar - Air pressure for sanding belt cleaning: 8 bar Iodjlc Dn Uspfx Afijar - Extraction port diameter: 150 mm - Main motor power: 7.5 kW - Power supply: 400 V - NEW machine Overall dimensions: - Length: 1400 mm - Width: 1520 mm - Height: 1800 mm

Kondisi: bekas, Technical data: Working width: 1030 mm 1 calibrating unit Roller diameter: 140 mm 2 combination units with pneumatic pad Roller diameter: 100 mm Workpiece height: 160 mm Sanding belt dimensions: 2 feed belt speeds Extraction port diameter: 2x160 mm Electric height adjustment Digital display Safety switch Main motor power: 12 kW Voltage: 380 V Manufacturer: C.B. Ijdpshqxwbefx Afiear Overall dimensions: Length: 1450 mm Width: 1700 mm Height: 1850 mm

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Iaodpjgtm U Aofx Afijr Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: baik (bekas), Tahun pembuatan: 1995, Mehrzweck-Flaechenschleifautomat Ijdpfx Afegnnbvjioar

Kondisi: bekas, Technical details: Working width: 1700 mm Max. workpiece thickness: 150 - 4.0 mm Abrasive belt dimensions: circulating mm Machine dimensions (LxWxH): 4.8 x 2.7 x 2.35 m For wood processing! Additional features: - Pneumatic belt guiding - Height adjustment via handwheel - Emergency STOP switch - Sanding roller adjustment - Belt tensioner - Roller conveyors (infeed and outfeed, each L: 2800 x W: 1700 mm, each with 6 rollers) motor-driven Iaodpfou Ng R Hjx Afier - Operation via control panel - Min./max. workpiece thickness: 4.0/150 mm - Abrasive belt width: 1300 mm (belt circulation) - Abrasive belt support (length x width): 1700/1350 mm Sale as is, machine will not be connected!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2007.10.191, lebar penggilingan: 1.350 mm, panjang sabuk penggiling: 4.800 mm, tinggi benda kerja (maks.): 150 mm, lebar sabuk penghalus: 1.400 mm, Automatic Sander + Dust Extraction Machine TECHNICAL DETAILS Sanding Width: 1,350 mm Working Height: 880 mm Workpiece Thickness: 3 – 150 mm Transport Bed: Continuous conveyor belt Transport Bed Drive: 4.0 kW / Frequency Converter 7.5 kW Feed Speed: 3 – 15 m/min Workpiece Vacuum Clamping System Drive: 7.5 kW Units: 3 x cross sanding, 1 x longitudinal sanding, 1 x brush unit Cross and Longitudinal Sanding Units Cross Sanding Unit – Sanding Belt Dimensions: 4,800 x 150 mm Sanding Belt Speed: 2–20 m/s Drive Power per Cross Sanding Unit: 15 kW Pressure Lamella Belt Dimensions (cross sanding): 4,350 x 140 mm Longitudinal Sanding Unit – Sanding Belt Dimensions: 2,620 x 1,400 mm Sanding Belt Speed (longitudinal sanding): 1.8 – 16 m/s Drive Power (longitudinal sanding): 15 kW Iedpfxoyg Exqs Afisar Pressure Lamella Belt Dimensions (longitudinal sanding): 1,900 x 1,380 mm Brush Unit Brush Roller Diameter: 120 mm Drive Power: 0.75 kW Air Requirements Cross Sanding Units: 91.5 m³/min Longitudinal Sanding Unit: 30.5 m³/min Brushing Device: 18.0 m³/min Transport Belt Blown Air: 13.5 m³/min Workpiece Vacuum Clamping System Exhaust: 40.0 m³/min Total Air Requirement: 193.5 m³/min Total Compressed Air Consumption: 115 m³/h MACHINE DETAILS Total Power Connection: approx. 80 kW Operating Voltage: 400 V Frequency: 50 Hz Main Machine Dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dust Extraction Machine EA 8 – Machine No.: 2007.10.192 Sanding Width: 1,350 mm Working Height: 880 – 920 mm Workpiece Thickness: 3–150 mm Required Air Speed: 20 m/s Air Requirement: 30.5 m³/min Transport Bed Drive: 1.1 kW / Frequency Converter 2.2 kW / 0.75 kW Feed Speed: 3–15 m/min Fan Drive: 5.5 kW Height Adjustment Drive: 0.18 kW Power Connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dust extraction machine EA 8 - Workpiece vacuum clamping system - Multiple cross and longitudinal sanding units - Brush unit