Beli Ajax Apollo 200 bekas (16.385)

Kondisi: baru, Tahun pembuatan: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter pressure vessel is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar using the integrated pressure regulator. The unit is also equipped with a built-in water separator, which removes moisture from the compressed air to prevent the blasting media from clumping due to excess humidity. For safe operation, our safety shut-off system is included. This starts and stops the blasting process with the actuation of the hand lever, which is mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 200 L" - Pressure regulator 1 1/4", permanently installed - Water separator 1 1/4", permanently installed - SAPI safety shut-off system Technical data - Pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-tested with certificate - Fixed piping 1 1/4" internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosage valve (suitable for all common media) - Capacity: 200 liters - Total height: 1,420 mm Lhodpfxowc Rk Eo Alkef - Vessel diameter: 600 mm - Total diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: - Fastest shut-on and shut-off times in compliance with trade association regulations (VBG 48) - Pressure can be precisely set before blasting – continuously adjustable from 0.1 to 12.0 bar - Lower media consumption, as the pressure vessel remains constantly pressurized and no unnecessary run-on is required - Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up required → less consumption & less hose wear - No condensate formation in the vessel, as it remains constantly pressurized → no venting or aeration required at each start/stop - Optimum blasting media dosing through hardened fine dosing valve - Reduced compressed air requirement → noticeably lower diesel consumption - One-man operation, as the pressure can be displayed and adjusted directly at the manometer – also possible without starting the machine - No sensitive components such as control valves, membranes, or seals → low-maintenance and reliable - Only the blasting hose at the safety shut-off requires regular inspection and replacement if necessary

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 450 kg, panjang total: 1.600 mm, lebar total: 1.100 mm, tinggi total: 1.700 mm, daya: 7,5 kW (10,20 hp), jenis arus masuk: tiga fasa, For sale is a pulverizer previously used for trial fine grinding applications in the food industry. The machine is robust, reliable, and powerful. Technical specifications: + Power output: 7.5 kW Lhjdpfoudvt Rex Alkef + Processing capacity: 20–50 kg per hour + Weight: 450 kg With the use of liquid nitrogen, the machine is immediately ready for operation—simply plug it in and start. It is still in near-new condition and can be inspected by appointment. The sale price is subject to an additional 19% VAT. If you are interested or have any questions, we look forward to your inquiry.

Kondisi: hampir baru (bekas), Als neue Stapelbehälter (Tote Bins) Fassungsvermögen: 200 Liter Lhjdpou Ti Sljfx Alkof Mobil auf 4 Nylonrollen Teilweise komplett mit Deckel Menge: 10 Stück verfügbar

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 155 mm, diameter mata gergaji: 450 mm, penyesuaian kemiringan mata gergaji: 46 °, kecepatan rotasi (maks.): 6.000 rpm, panjang bagian (maks.): 3.450 mm, TECHNICAL DETAILS Max. cutting height: 155 mm Max. cutting height at 45°: 105 mm Max. cutting width: 1,250 mm Max. cutting length: 3,450 mm Max. saw blade diameter: 450 mm Bore diameter: 30 mm Saw blade tilt range: 0 - 46° Speed: 3,000 / 4,000 / 5,000 / 6,000 rpm Sliding table length: 3,200 mm Scoring unit: Auto-EPS with electro-motorized position adjustment for lateral and height movement Crosscut fence: Standard, with 3 digital flip stops, extendable up to 3,500 mm Rip fence: Electro-motorized control, with position control to 0.1 mm MACHINE DETAILS Motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,700 x 2,300 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Electric axis control Sliding table completely recalibrated Scale carrier replaced with new system featuring 3 stops Stainless steel scale for angle adjustment replaced Crosscut fence checked Longitudinal fence with 90° locking mechanism completely replaced Machine electrically checked Machine fully recalibrated, tested, and lubricated Ljdpfx Aeyx Et Holkjhf Note: The specified data are taken in part from manufacturer's brochures or documentation and may differ from actual values.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 32 t, tinggi kerja: 200 mm, model controller: Siemens 840D, panjang kerja: 2.150 mm, DETAIL TEKNIS Panjang tekukan: 2.150 mm Tinggi tekukan maksimum: 200 mm Panjang/lebar minimum antara tekukan: 160-350 mm Gaya tekan: 32 t DETAIL MESIN Lhjdpfx Aljy D Ihwekef Kontrol: Siemens 840D Dimensi & Berat Dimensi (P x L x T): 8.500 x 7.000 x 2.850 mm Berat: 30.000 kg PERLENGKAPAN Pergantian alat otomatis Manipulator Siklus tekuk balik Sistem sentering pelat Alat atas tambahan Sistem pemuatan & pembongkaran

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 300 kW (407,89 hp), berat keseluruhan: 65.000 kg, ukuran ban: 6*2, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, konfigurasi gandar: 3 gandar, kelas emisi: Euro 3, Tahun pembuatan: 2026, nomor mesin/kendaraan: V9638J96, Perlengkapan: hidrolik, komputer bawaan, penggerak semua roda, Sand- und Kiesaufbereitungsanlage | MINGYUAN Schwerindustrieausrüstung Eine Sand- und Kiesaufbereitungsanlage ist ein integriertes System zur Herstellung hochwertiger Baustoffe wie Sand, Kies, Splitt und künstlichem Sand. MINGYUAN bietet komplette Lösungen für das Brechen und Sieben von Zuschlagstoffen für Steinbrüche, den Bergbau, den Bau sowie Infrastrukturprojekte und gewährleistet dabei eine effiziente Materialaufbereitung und gleichbleibende Produktionsleistung. Allgemeine Beschreibung Die Sand- und Kiesproduktionslinie von MINGYUAN kombiniert fortschrittliche Brech-, Sieb-, Wasch- und Fördertechnik, um Rohmaterialien wie Kalkstein, Granit, Basalt, Flusskies und Quarz zu Baustoffsanden und Kies unterschiedlicher Körnung zu verarbeiten. Die Anlage umfasst in der Regel Backenbrecher, Prallbrecher, Kegelbrecher, Vibrationssiebe, Sandwaschanlagen, Bandförderer und Entstaubungsanlagen und bildet so ein vollständiges, automatisiertes Produktionssystem. Anwendung findet sie im Straßenbau, in Betonmischwerken, im Baustoffsektor und in Wasserkraftprojekten. Leistungsspektrum: 30–1.000 Tonnen pro Stunde (kundenspezifisch anpassbar) Aufgabekörnung: ≤800 mm (abhängig vom Brechertyp) Endkörnungen: 0–5 mm (Sand), 5–10 mm, 10–20 mm, 20–40 mm (Kies) Hauptausstattung: Backenbrecher (PE/PEX-Serie), Kegelbrecher, Prallbrecher, VSI-Sandhersteller, Vibrationsförderer, Vibrationssieb, Sandwaschanlage, Bandförderer, Steuerungssystem Energieversorgung: Elektrisch oder dieselbetrieben wählbar Automatisierung: PLC-Steuerung mit Echtzeitüberwachung und einstellbarer Kornverteilung Lhedpfsq Nia Ijx Alkef Die MINGYUAN Heavy Industrial Equipment Co., Ltd. bietet komplette Lösungen für Sand- und Kiesaufbereitung mit zuverlässiger Leistung, wettbewerbsfähigen Preisen und professionellem After-Sales-Service für Kunden weltweit in der Bergbau-, Bau- und Zementindustrie. 2. Brechen und Sieben: - Die gewonnenen Rohstoffe müssen häufig gebrochen und gesiebt werden, um die Teilchengröße zu verringern und nach Korngrößen zu sortieren. - Brecher zerkleinern größere Gesteinsbrocken, und Siebe trennen das Material nach Korngröße. 3. Waschen: - Durch das Waschen werden Verunreinigungen wie Ton, Schluff und Staub aus den Rohstoffen entfernt. Dies ist besonders bei Zuschlagstoffen für den Bau wichtig. 4. Klassieren und Sortieren: - Nach der Wäsche werden die Materialien häufig klassiert und sortiert, um sie nach Kornfraktionen und Qualitätsstufen separieren zu können. 5. Lagerung und Haldenbildung: - Aufbereitete Materialien werden in Halden zwischengelagert. Geeignete Lagermöglichkeiten sind notwendig, um verschiedene Körnungen zu managen. 6. Förderung und Transport: - Förderbandsysteme transportieren die Materialien zwischen den verschiedenen Verfahrensstufen. Den Abtransport zur Verteilung übernehmen Lkw oder Förderbänder. Schlagworte Sandproduktionslinie, Kiesaufbereitungsanlage, Zuschlagstoff-Brecheranlage, Steinbrecher, Sandherstellungsmaschine, Sandwaschanlage, Vibrationssieb, Backenbrecher, Kegelbrecher, Prallbrecher, VSI-Brecher, Steinbruchausrüstung, Bergbaumaschinen, Baustoffzuschlagstoffe, künstlicher Sand, Splitt, Flusskies, Kalksteinbrecher, Basaltbrecher, Granitbrecher, Sandwaschanlage, Siebanlage, Fördersystem, MINGYUAN Sandanlage, Aufbereitungsmaschinen für Zuschlagstoffe, Steinbrechlinie, Sand- und Kieswaschanlage, Hochleistungsbrecher, Umweltfreundliche Sandanlage, Hersteller von Zuschlagstoffproduktionsanlagen.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 170 kg, kecepatan spindle penggilingan: 45.000 rpm, kecepatan spindel (min.): 5.000 rpm, kecepatan spindel (maks.): 45.000 rpm, diameter penjepit: 140 mm, panjang penjepitan: 2.000 mm, masa garansi: 12 bulan, DE2001 Lhodpfxoxrnchs Alkjf

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 450 kW (611,83 hp), Tahun pembuatan: 2025, de Ljdpsq Nfvusfx Alkehf

Kondisi: baru, de-01 Lhodpfx Aeynnfiolksf

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual kamar uji iklim KPK 200. Unit dalam kondisi sangat baik dan siap digunakan langsung. Data teknis: Tahun pembuatan: 2011 Volume nominal ruang uji: 280 dm³ Lhjdpfx Aey E Ilxjlkef Dimensi luar kamar uji: 1500 x 2040 x 1075 mm Ukuran minimal masuk: 2060 x 1095 mm Dengan motor kipas dan pintu dilepas: 1500 x 1940 x 925 mm Ruang uji: 720 x 690 x 560 mm Lebar bersih pintu: 720 x 690 mm Jendela penglihatan berpemanas: 500 x 600 mm Jumlah rak: 3 pcs Beban maksimum yang diizinkan: 90 kg (merata pada 3 rak) Beban maksimum per rak: 30 kg Bahan ruang uji: Stainless steel Wst.-Nr. 1.4301

Kondisi: bekas, Tahun pembuatan: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 — Drilling and Milling Made for You! This CNC machining center comes equipped with a comprehensive range of accessories for milling and drilling, catering to every requirement in the processing of wood and similar materials. Ø Powerful: Equipped with drilling spindles operating at 8,000 rpm. The technology features the toughest spindle available on the market, providing over 1,000 maintenance-free operating hours. Ø Better equipped: Offers a wide variety of configuration options thanks to the multifunction table, allowing for optimal customization according to your needs. Ø Easier programming: Simplified and more intuitive programming enabled by the integrated Cad-Cam module "MAESTRO CNC". Ø User-friendly: The worktable is accessible at all times; the control cabinet and vacuum pump are integrated and, in the PRO SPACE configuration, there are no protective barriers. Load-Bearing Structure The load-bearing structure is built with an especially robust monolithic steel base, heavily ribbed and extremely rigid. The extra-wide support surface is specifically designed to provide the machine with outstanding stability, ensuring lasting precision under any working conditions without requiring floor anchoring. Lsdpfx Aloywvldskehf The base forms a large and solid support for the movable gantry: the work unit is thus provided with a balanced, stable, and durable backing, resilient to heavy-duty operation, ensuring higher quality performance and increased accuracy. The movable portal is a solid, single piece anchored on both sides of the base and runs on premium-grade prismatic guides with recirculating ball carriages. Dual motorization along the X-axis guarantees peak performance even in demanding operational environments. Movement of the lower mobile unit (X-axis) and the work unit along the mobile unit’s beam (Y-axis) is driven via helical toothed rack and pinion, delivering higher tooth-to-tooth thrust for greater acceleration and increased speed along the X and Y axes. The specially designed helical gearing minimizes mechanical wear and provides quieter operation. The vertical Z-axis is powered by a ball screw, ensuring perfect balance under dynamic loads and accommodating high acceleration and deceleration rates. The main milling unit is directly coupled to the Z-axis carriage, ensuring outstanding finish quality by eliminating vibrations completely. Movement along the X-Y-Z axes is achieved by “brushless” motors powered by static inverters, delivering: - Reduced processing times through improved acceleration - Enhanced positioning accuracy thanks to high-resolution encoders - No zeroing procedures required after startup due to absolute encoders - Minimal maintenance, as the “brushless” system has no brushes Axis movements and all main machine operations are managed via an industrial NS module with digital data transmission.

Kondisi: bekas, Tahun pembuatan: 1989, Mesin bekas Tahun pembuatan: 1989 Perlengkapan dan data teknis: Ukuran meja 2000 x 880 mm (meja lengkap dari coran) dengan penyangga bingkai yang dapat ditarik Motor penggerak dengan perubahan kutub 5/6 kW Kecepatan spindel 3000/4500/6000/9000 rpm Penyesuaian tinggi spindel frais 110 mm Penyetelan sudut spindel frais 45° dengan alat makan 3-rol Holz Her Ketersediaan: segera Lhedjy E Axtjpfx Alkof Lokasi: 63934 Röllbach

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, masa garansi: 6 bulan, tahun perombakan terakhir: 2026, tegangan masuk: 400 V, Tersertifikasi DGUV hingga: 05/2027, berat keseluruhan: 1.500 kg, lebar total: 1.400 mm, panjang total: 1.300 mm, frekuensi input: 50 Hz, arus masuk: 16 A, sekring listrik: 16 A, Mixer adonan tipe hub Mixer Diosna dapat digeser Model: D 200 a Mesin adonan dengan penutup debu tepung 2 troli bowl Teknologi kokoh 2 kecepatan Koneksi 400V, steker 32A-CEE Mesin bekas, direkondisi Opsi: Layanan leasing & sewa Pengencangan lantai Layanan pengiriman Kontrak perawatan E-Box Paket layanan Instruksi & commissioning Mixer tipe hub lainnya tersedia di stok! Lhsdpfx Ajuyrzrolkof

Kondisi: baik (bekas), Tahun pembuatan: 1997, 10620 Lsdpfx Asyagidslkohf

Kondisi: baru, Tahun pembuatan: 2025, mskt23-wib200 Lhjdpoy Ehy Aofx Alkef

Kondisi: sangat baik (bekas), 7881 Ledoyz T R Eepfx Alkshf

Kondisi: sangat baik (bekas), CATALOG NO. 6623 TECHNICAL DATA - Diameter of processed rods: 75–200 mm - Minimum input material length: 1100 mm - Infinitely variable feed speed adjustment + forward/reverse - Cutter head drive motor: 15 kW - Feed motor: 1.7 kW Configuration: - 2 toothed feed rollers - 4-knife cutter head - 2 smooth outfeed rollers Lodpox Rqzaofx Alkehf - Electrically adjustable cutter head - Electrically adjustable rollers - Dimensions (L/W/H): 3570 x 1300 x 1700 mm - Weight: approx. 4000 kg FEATURES – Manufactured in Germany – Capability for conical turning of posts – Used rounding machine in very good condition Net price: 98,900 PLN Net price: 23,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, solely for identification of the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Kondisi: baru, CATALOG NO. HZ0001 PRODUCT FEATURES Standard equipment includes mobile sawdust containers, fitted with a compression system that ensures a tight connection between the container and the machine structure. This enables the achievement of high vacuum levels without losses at individual connection points. Contaminants from the filter drop directly into hermetically sealed containers that can be quickly unloaded. These containers are equipped with a special suspension system and mobile casters, ensuring easy, fast transportation and maneuverability. The 5.5 kW / 6500 m³/h vacuum fan, operating at 2800 Pa, works on the turbine principle. The sound-insulated fan design significantly reduces noise emission during operation. A certified control cabinet allows continuous monitoring of correct operation, thanks to its flexible placement, away from the machine. Comes as standard with an integrated fan control system and a filter fabric cleaning system. ADVANTAGES - New machine - CE certificate - High performance - Professional quality Scope of delivery: • Polyester filter, 5 microns • 2 containers • Chassis • Filter cleaning by vibration system with control TECHNICAL DATA • Extraction capacity: approx. 6500 m³/h • Motor power: 5.5 kW • Rotational speed: 3000 rpm • Voltage: 400 V, 50 Hz • Extraction connection: 280 mm • Filter surface area: 16.3 m² • Extraction speed: 28 m/sec • Number of filters: 35 • Vacuum: 2800 Pa Lhedpfx Aljx Ux E Uskef • Filter category: G • Filter material: polyester • Dimensions (L x W x H): 921 x 1982 x 2271 mm • Weight: 350 kg Net price: 16,000 PLN Net price: 3,810 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Kondisi: baru, NOMOR KATALOG MR001 - mesin baru, dokumentasi DTR + CE DATA TEKNIS - lebar kerja 2000 mm - lebar depan 2500 mm - kedalaman 850 mm - tinggi 1700/1950 mm - kapasitas maks. 7000 m³/jam - daya kipas 1,5 kW - kecepatan 2850 rpm - parameter listrik 400V-50Hz - diameter pipa keluar - persegi 540x540 mm - filter awal berbahan karton - filter "Paint-stop" - tingkat kebisingan sekitar 78 dB - dimensi (p/l/t) 2500x850x2200 mm Lhodex Uz Rmopfx Alksf - berat sekitar 250 kg Harga netto: 14.100 PLN Harga netto: 3.350 EUR berdasarkan kurs 4,20 EUR (Harga dapat berubah seiring fluktuasi nilai tukar)

Kondisi: sangat baik (bekas), NOMOR KATALOG 7908 Ledpsyrr D Refx Alkehf SPESIFIKASI TEKNIS - diameter alat, dudukan Wescott 0-20mm - kedalaman lubang maksimum 155mm - panjang frais maksimum 250mm - pengaturan mesin bor maju/mundur, kanan/kiri + sudut - pengaturan meja naik/turun - sudut putar meja 0-45˚ - dimensi meja kerja 600x320mm - kepala empat titik 16-22-25-32mm - penekan material 2 buah - daya motor 2,2kW - dimensi p/l/t 1050x800x1250mm - berat 200kg KEUNGGULAN – produksi Jerman – kondisi sangat baik – penekan eksentrik, 2 buah – tidak dicat ulang – bor bekas pakai Harga netto: 6.500 PLN Harga netto: 1.550 EUR sesuai kurs 4,2 EUR (Harga dapat berubah seiring fluktuasi yang lebih tinggi)

Kondisi: sangat baik (bekas), Catalogue number 7805 TECHNICAL DATA - Track width: 340 mm - Shaft width: 340 mm - Disc bore diameter: 80 mm - Discs mounted on upper shaft: 350 mm - Discs mounted on lower shaft: 300 mm - Maximum cutting height: 200 mm - Minimum workpiece length: 700 mm – Upper section - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Shaft with saw blades - 3 smooth pressure rollers – Lower section - Track - Shaft with saw blades - Track - Infinitely variable feed speed - Main motors: 2x approx. 55 kW Lhsdpsy At Rhofx Alksf - Feed motor: 3 kW - Electric lifting/lowering of body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2x200 mm - Dimensions (L/W/H): 2700x1800x2150 mm - Weight: approx. 5000 kg ADVANTAGES – German manufacture – Double-shaft – 2x55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Kondisi: sangat baik (bekas), 6650 TECHNICAL SPECIFICATIONS - Maximum cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Minimum blade diameter: 250 mm - Maximum blade diameter: 350 mm - Maximum width of offcut: 870 mm - Minimum length of offcut: 1500 mm From above: - Pawls - Driven, gear-type metal roller - Pawls - Driven, gear-type metal roller - Pressure unit - Saw shaft - 2 driven, metal rollers with pneumatic pressure From below: - Guide rail - Metal sliding roller - Pawls - Track - Saw shaft - Track - Infinitely variable feed speed adjustment on inverter: 4–40 m/min - Main motors: 2×75 kW - Feed motor: 3 kW - Electric up/down body lifting: 0.55 kW - Electric saw shaft adjustment: 2×0.25 kW - Centralized lubrication - Extraction spigot diameter: 2×300 mm - Dimensions (LxWxH): 3100×2600×2000 mm - Weight: approx. 6500 kg - Centering device included - 3 driven gear rollers - 8 driven smooth rollers - Motor: 2×1.5 kW - Pneumatic top pressure unit - Side pressure unit Lsdpfsyk Hg Rex Alkjhf - Dimensions (LxWxH): 4850/1100/1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech production – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 7.610 h, tinggi total: 1.650 mm, panjang total: 4.400 mm, lebar total: 1.000 mm, Weight: 2,500 kg Price: On request - Special features: - Description: The machine currently has a fault that needs to be rectified - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Operating hours: 7,610 - Number of units: 9 - 1st unit type: Pre-milling unit - Tools included: Yes Lhjdpfx Alsy Ewv Tokof - 2nd unit type: Glue application unit - 3rd unit type: Pressure roller unit - Tools included: Yes - 4th unit type: End trim unit - Tools included: Yes - 5th unit type: Rough trim unit - Tools included: Yes - 6th unit type: Radius scraper unit - Tools included: Yes - 7th unit type: Corner rounding unit - Tools included: Yes - 8th unit type: Flat scraper unit - Tools included: Yes - 9th unit type: Brushing unit - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions [mm]: 4,400 x 1,000 x 1,650 (L x W x H) - Transport weight [kg]: 2,500 - Number of transport packages: 1 Financial information VAT: The quoted price is exclusive of VAT VAT/differential taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2021, jam operasional: 1.220 h, kapasitas angkut: 2.000 kg, jenis bahan bakar: listrik, panjang garpu: 1.150 mm, berat kosong: 700 kg, panjang total: 670 mm, jenis penggerak: Elektro, lebar konstruksi: 730 mm, Hand pallet truck Titik berat muatan: 600 Jenis tiang: Tidak ada Kondisi teknis: sangat baik Jenis ban depan: Polyurethane Kondisi ban depan: 100% Jenis ban belakang: Polyurethane Kondisi ban belakang: 100% Baterai Voltase: 24V Baterai Ah: 400Ah Produsen baterai: Kapatest 100% Tahun pembuatan baterai: 2021 Deskripsi: Perangkat bekas yang telah direkondisi secara pabrik oleh Toyota, termasuk inspeksi baru dan persetujuan baru sesuai standar FEM (dulunya UVV). Lhjdpfxsykvxis Alkef Kontrol impuls, Sertifikat CE,

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 19.500 h, nomor mesin/kendaraan: LC621, Used Tetra Pak A3/Speed 200 ml Prisma line for UHT Technical Specifications & Performance Data This used filling line is a complete Tetra Pak A3/Speed V040 filling solution, configured for 200 ml Prisma cartons. It is a used industrial packaging line designed for the production of high-quality beverages with integrated downstream packaging and data coding. The package also includes a comprehensive UHT process module to support aseptic filling processes. Main Filler: Tetra Pak A3/Speed V040 (carton filling technology) Primary Format: 200 ml Prisma cartons Speed: 24,000 BPH (200 ml Prisma) Accumulator: Tetra HELIX ACHX30-0700-100M Line Control: Tetra Pak Line Controller 30 PLUS Straw Application: Tetra Pak Straw Applicator Conveyors: Complete Tetra Pak conveyor system Wrap-Around Packaging: GAMPACK WB90HS Case/Carton Packaging: GAMPACK Cartonpacker Data Coding: Domino printer Operating hours: 19,500 (line) Included UHT Process Equipment: Tetra Pak Homogenizer 400 Cooling tank 2,000 L Tetra Pak Aseptic Tank 30,720 L with Tetra Alsafe Complete Tetra Pak VTIS UHT processing unit (pumps, valves, heat exchangers) Tetra Pak CIP Satellite Advanced Automation & Control Systems The line is coordinated by the Tetra Pak Line Controller 30 PLUS, ensuring synchronized operation from filling to secondary packaging. The integrated automation supports stable product flow via the Tetra HELIX accumulator, while the Domino printer provides inline data coding. System-wide interlocks and operator control points enable efficient, repeatable changeovers and a robust processing regime suitable for aseptic beverage packaging. Integration Capability into Production Lines Designed for seamless end-to-end operation, the line connects the Tetra Pak A3/Speed V040 filler with straw applicator, conveyors, accumulation, as well as both wrap-around and case packaging. The configuration allows smooth transitions between operating units for consistent throughput. Specifically configured for 200 ml Prisma cartons, it can be easily integrated into existing industrial packaging layouts for beverage production, either as a stand-alone carton line or in conjunction with upstream processing supplies. Machine Condition & Maintenance History This used Tetra Pak A3/Speed V040 carton filling line has 19,500 operating hours. It is offered as a complete package of a used filling line with downstream packaging and UHT processing technology, suitable for operations seeking proven, production-ready carton packaging machinery. Operational Performance & Versatility Ljdpsy Egm Iofx Alkehf Designed for aseptic carton packaging, the system supports UHT-treated beverag…