Beli Atc Ahs-70-50.28.100 bekas (14.911)

Kondisi: sangat baik (bekas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a premium thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. This unit is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Applications: - Material testing - Aging tests - Electronic and component testing - Thermal shock and temperature cycling tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature constancy: ±1 K over time ±2 K spatially Temperature change rate: Max. 100 K/min average for shock tests Without radiant heat Transfer rate: ≤ 15 min in range from -65°C to +200°C with 10 kg ICs Transfer time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A Site-side protection: 32 A slow-blow Connection: Cekon 32 Refrigeration system: Refrigerants: R404A / R23 Water-cooled, low-noise, fully hermetic Features / Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system Hodpfxey Hkd Hs Al Isl - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for customer test item activation - Fault indication via potential-free contact (Load up to 30 VDC, 2 A) - EMC tested Technical design: - Hot and cold chamber - Drawer carriage with spindle drive - Test space / basket made of stainless steel, material no. 1.4301 - Insert basket made of stainless steel wire - Tube feedthrough NW 50 with sealing plug - Compressed air connection 1/4" external thread - Gravity condensate drain, R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to installation sketch: External dimensions approx.: 2335 x 940 x 1820 mm Installation dimensions approx.: 1990 x 940 x 1652 mm Test chamber dimensions: Height approx. 410 mm; Width approx. 480 mm; Depth approx. 660 mm Window: 300 x 300 mm Further data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption per test cycle: approx. 8 kWh For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data reserved!) Further questions? We are happy to answer them by phone.

Kondisi: sangat baik (bekas), CTS Climate Test Chamber Model: CS-70/1000-5 Water-Cooled Condenser Year of Manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber from CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for simulating a wide range of environmental conditions and is typically used in industry, research, and quality assurance. It enables precise testing under extreme temperature and humidity conditions, for example for: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test chamber (1000 liters) and powerful control technology, both rapid temperature changes and constant long-term tests can be carried out. The system is water-cooled, ensuring stable and efficient operation. Technical Data: Model: CS-70/1000-5 Chamber volume: approx. 1000 liters Control: - Multi-touch controller with integrated program generator - Programmable test cycles Side pipe/cable ports: - 1x port NW 50 - 1x port NW 125 Temperature range: –70 °C to +180 °C Change rate: up to 5 K/min Temperature stability: ± 0.3 K Hodpfjy Hkc Asx Al Ijl Climatic data (humidity): Humidity range: 10% to 98% RH Dew point range: –10 °C to +94 °C Dimensions: External (HxWxD): approx. 1950 × 1270 × 2245 mm Internal (HxWxD): approx. 900 × 1000 × 1100 mm Electrical Data: Connection: 400 V / 3/N / 50 Hz Power: 17.6 kW Nominal current: 28.5 A Refrigeration system: R452A – 5.1 kg – GWP 2140 R23 – 2.1 kg – GWP 14800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 22 Weight: approx. 900 kg Important information for you as a buyer for your safety! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run Condition: used Device is fully visible as per the pictures. Display: STOP / Manual mode Scope of delivery: CTS Climate Test Chamber CS-70/1000-5 Scope of delivery as shown in the pictures Inspection by appointment possible. Loading by forklift can be organized. (Technical data subject to change and errors!) If you have additional questions, we are happy to answer them by phone.

Kondisi: sangat baik (bekas), ESPEC climate test chamber Model: ARS-0680-AE ESPEC Climate Test Chamber / Environmental Simulation Chamber Change Rate: up to approx. 5 K/min Model ARS-0680-AE Year of Manufacture: 2018 For sale is a high-quality ESPEC climate test chamber for precise temperature and humidity testing in research, development, quality assurance, and industrial applications. Hedpsy Hkb Sofx Al Isl The unit is in used condition and is fully visible as shown in the pictures. The current display shows STOP / ready for operation. Operating hours according to display: approx. 6,950 hrs. Technical Specifications Model: ARS-0680-AE Test chamber volume: approx. 680 liters Temperature range (typical ARS series): approx. -70°C to +180°C Humidity operation: available Change rate: up to approx. 5 K/min Internal dimensions (W x H x D): 850 × 1000 × 800 mm External dimensions (W x H x D): 1050 × 1955 × 1805 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 27 A Weight: approx. 615 kg Year of manufacture: 2018 Cooling: air-cooled (no external water connection required) Refrigerants as per nameplate: R452A – 2.3 kg – GWP 2141 R23 – 0.65 kg – GWP 14800 Features / Equipment - Touchscreen control panel - Program mode and constant mode - Observation window in the door - Stainless steel test chamber - Interior chamber lighting - Side pipe and cable ports - Ethernet interface - Specimen temperature input - Power supply control for specimen - Time signal outputs - Water tank system for humidity operation - Mobile version (on castors) Weight: approx. 615 kg For your security as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Scope of Delivery - ESPEC climate test chamber ARS-0680-AE - Including available documentation - Scope of delivery as visible in the pictures Condition & Notes Condition: used Inspection by appointment possible. Loading by forklift can be organized. (Specifications subject to change, prior sale and errors reserved!) If you have any questions, we are happy to assist you.

Kondisi: sangat baik (bekas), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, designed for precise temperature, climate, and stress-screening tests in research, development, quality assurance, and industrial applications. The unit is in used condition and can be viewed in full detail in the provided images. Current display: Manual operation / Stop. Operating hours according to display: Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % rH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Temperature change rate according to IEC 60068-3-5: Heating: 6.0 K/min Cooling: 7.0 K/min Power connection: 400 V 3/N 50 Hz Nominal power: 14.6 kW Nominal current: 22.0 A Protection class: IP 22 Refrigerant: R404A / R23 Pre-cooling stage: R404A – 4.5 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2 equivalent: 17.65 t / 31.08 t GWP: 3922 / 14800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: Observation window in the door Stainless steel test chamber LED chamber lighting CTS LCD control panel with digital controller Specimen protection / temperature limiter Water-cooled refrigeration unit Automatic water replenishment / DI water inlet Chamber and condensate drain Volt-free contact Digital outputs RS232 interface Ethernet interface Side cable ports Cable ports according to layout plan: 1x port NW 50 2x ports NW 125 Chamber dimensions according to layout plan: approx. 850 x 850 x 830 mm External dimensions according to layout plan: approx. 1900 x 1120 x 1875 mm Weight / mass according to documentation: approx. 750 kg Scope of delivery: CTS Climate Test Chamber CS-70/600-5 including existing documentation / test certificates Scope of delivery as shown in the images For your security as the buyer: The unit can be inspected by arrangement. Forklift loading can be organized. If you have any questions, we are happy to assist you. For your safety as the buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate Hsdpfx Aloy Hkblj Iol 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Subject to technical modifications and errors!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), CTS Type: C-70/600 Climate Test Chamber CTS C-70/600 Water-cooled version with observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industrial applications. The device is used and can be fully inspected as shown in the images. The current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% RH, and actual water reserve 11.0 l. Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Characteristics: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / DI water inlet Test chamber and condensate drain Side tube ports on the test chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions as per documentation: approx. 850 x 850 x 830 mm External dimensions as per documentation: approx. 1900 x 1115 x 1850 mm Weight as per documentation: approx. 600 kg Scope of Delivery: CTS climate test chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your peace of mind as a buyer: The unit can be inspected by appointment. Hodpfjy Hkazox Al Iel Loading by forklift can be arranged. For your safety as a buyer, the following measures are taken in advance on all our chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Specifications and details are subject to change and correction!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 17 kW (23,11 hp), jenis bahan bakar: diesel, berat kosong: 1.228 kg, Tahun pembuatan: 2016, jam operasional: 1.197 h, tinggi konstruksi: 1.800 mm, jenis penggerak: Diesel, Baggerlader_BOBACAT_S70_2016 Hsdpfxey E D H So Al Iel

Kondisi: baru, c62ac819 Hjdpfx Aljynnd Eo Iol

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), - BEKAS - CNC PRESS BRAKE 7-SUMBU SINKRONISASI SUMBU: Y1 - Y2 - X - X1 - R - Z1 - Z2 PANJANG TEKANAN: 3150 mm TONASE: 70 ton KEDALAMAN LEHER: 400 mm JARAK ANTAR TEGAKAN: 2640 mm TINGGI BUKA: 450 mm KECEPATAN DEKAT: 160 mm/detik KECEPATAN KEMBALI: 160 mm/detik Hsdjrk Shcepfx Al Ijl KECEPATAN KERJA: 0-10 mm/detik DAYA MOTOR: 15 kW UNIT KONTROL: ESA KVARA BERAT: 7800 kg DIMENSI KESELURUHAN: 3400 x 2100 x 2650 mm

Kondisi: bekas, Tahun pembuatan: 2022, kapasitas angkut: 5.000 kg, tinggi angkat: 7.270 mm, panjang total: 5.670 mm, - Load capacity: 4,999 kg - Load center: 500 mm - Load distance: 540 mm - Axle load with load (front): 10,468 kg - Axle load without load (front/rear): 2,956/3,635 kg - Tire size front: 355/45-15 - Tire size rear: 250-15 - Number of wheels front/rear: 2/2 - Track width front (single tires): 1,210 mm - Track width front (dual tires): 1,364 mm - Track width rear: 1,120 mm - Mast/carriage tilt, fwd/rev: 3/7 degrees - Seat height: 1,298 mm - Coupling height: 496 mm Hjdey E Uikepfx Al Iel - Fork carriage: Category 3 / Form A - Aisle width with pallet 1000 x 1200 (crosswise): 4,470 mm - Aisle width with pallet 800 x 1200 (lengthwise): 4,670 mm - Turning radius: 2,730 mm - Smallest pivot point: 746 mm - Travel speed with/without load: 20/20 km/h - Lifting speed with/without load (min. fan speed): 0.50/0.53 m/s - Lowering speed with/without load: 0.50/0.50 m/s - Gradeability with/without load: >30 % - Service brake: mechanical - Engine manufacturer/type: Deutz/TCD 2.9 L4 - Rated speed: 2,200 rpm - Max. torque: 260 Nm - Number of cylinders/displacement: 4/2,900 cm³ - Working pressure for attachments: 250 bar - Oil flow for attachments: 30 l/min - Trailer coupling: Pin type

Kondisi: bekas, Propane Forklift, LPG Forklift STILL Model RX 70-16T Serial No. 517314G00021 Year of manufacture: 2016 Rated capacity: 1600 kg Lift height: 4920 mm Fork length: 1000 mm Fork carriage width: 980 mm Overall height: 2160 mm Overall width: 1100 mm Overall length without forks: 2200 mm Unladen weight: 3040 kg - Triplex mast with full free lift, 1550 mm - Hydraulic side shift - LPG-electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - Hydraulic power steering - Front work lights - Reverse warning light (blue) - Rear warning beacon (yellow) Hjdpjinldwefx Al Iel - 4-wheel super elastic solid rubber tires, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, VICTRON trickle charger - New UVV safety inspection by TÜV (surcharge: EUR 150 net) Good condition

Kondisi: sangat baik (bekas), Nomor katalog 7737 DATA TEKNIS - kekuatan penekanan: hidrolik - bentuk briket: bulat - diameter briket: 70 mm - diameter tangki: 1000 mm - kapasitas sekitar 70 kg/jam - pengoperasian mesin otomatis - motor: 5,5 kW - dimensi (P/L/T): 1800x1150x1540 mm - berat: 900 kg KEUNGGULAN – produksi Italia – mesin briket bekas Hsdpfx Aoyyyvljl Isl – dokumentasi DTR – kondisi sangat baik Harga netto: 34.900 PLN Harga netto: 8.300 EUR (tergantung pada kurs 4,2 EUR) (Harga dapat berubah seiring fluktuasi yang lebih tinggi)

Kondisi: sangat baik (bekas), pl-hu-001 Hjdpfxex Thcmo Al Iel

Kondisi: baik (bekas), Tahun pembuatan: 2000, Ref. No.: 10588 Manufacturer: HEDELIUS Model: CB 70 - 3200 Year of manufacture: 2000 Control type: CNC Control system: Heidenhain TNC Location: Halberstadt Country of origin: Germany Machine serial no.: 0032XXXX Required floor space: 7200 x 3400 x 3100 mm (L x W x H) X travel: 3200 mm Y travel: 720 mm Z travel: 600 mm Table height: 900 mm Number of T-slots: 5 Max. workpiece weight: 3000 kg Max. tool length: 330 mm Clamping surface: 3900 x 650 mm T-slot width: 18 mm T-slot spacing: 125 mm Tool holder: DIN 69871 AD 40 Spindle speed: 30 - 8000 rpm Maximum torque: 102 x 240 Nm Feed rates X/Y/Z axes: 30000 mm/min Rapid traverse X/Y/Z: 30 / 30 / 30 mm/min Total power consumption: 50 kW Hodpfx Alsy Ed Ive Ijl Boring diameter: 28 x 44 mm Max. feed force: 9000 / 9000 / 9000 kN Distance spindle nose to table: 140 - 740 mm Number of tools: 30 pcs Tool clamping: Disc spring Max. milling capacity: 400 x 600 Max. tapping diameter: M20 x M30 mm Coolant pressure: 250 bar Additional information: - L = 7.50 m: Special accessory automatic door - H = 3.60 m: Special accessory full enclosure of machining area - Ø 125 mm only with free adjacent slots 35 mm The machine can be inspected under power by prior arrangement.

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 102 h, 2023 | SEBA New Evolution 70-40 Jaw Crusher | Used crusher | 102 operating hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 112,000 or Make an Offer. Payment upon delivery available for a low fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 82 inspection points: 78 approved ✅ 3 minor imperfections ℹ️ 1 issue ⚠️ 📌 Inspector’s Comments: Well-maintained jaw crusher from 2023, a few scratches present, all conveyor belts appear to be in good condition, left track requires some tensioning, jaws and upper deck in good condition, no other issues found during inspection. 📄 Want to see the full inspection, extra photos, or a video? Hjdeytnykepfx Al Ijl Tip: The reference “39845 Equippo” is commonly used to find more details online. 💡 Why this machine and our service stand out: ✔ Comprehensive inspection by professionals ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2007, jam operasional: 10.649 h, kapasitas angkut: 7.000 kg, tinggi angkat: 5.000 mm, pengangkatan bebas: 1.250 mm, pusat beban: 700 mm, jenis bahan bakar: diesel, tipe tiang: dupleks, tinggi konstruksi: 3.750 mm, produsen motor: PERKINS, lebar kerangka garpu: 1.500 mm, panjang garpu: 1.400 mm, lebar garpu: 200 mm, ketebalan garpu: 70 mm, kondisi ban: 100 persen, Tipe ban depan: ban superelastis (hitam), ukuran ban depan: 10.00-20 SE, tipe ban belakang: ban superelastis (hitam), ukuran ban belakang: 10.00-20 SE, berat keseluruhan: 19.400 kg, berat kosong: 12.400 kg, tinggi total: 3.400 mm, panjang total: 5.000 mm, lebar total: 2.300 mm, warna: kuning, Perlengkapan: garpu palet, kabin, pencahayaan, 🚜 GEBRAUCHTE GABELSTAPLER MIT QUALITÄTSGARANTIE – FT LOGISTICS 📌 Jahrelange Erfahrung | 🛠️ Eigene Werkstatt & Lackiererei | 💼 Professionelle Beratung | 🚚 Eigener Fuhrpark | 🤝 After-Sales-Unterstützung Suchen Sie einen zuverlässigen Gabelstapler? Wir sind ein renommierter Händler für neue und gebrauchte Gabelstapler mit langjähriger Tradition. Wir beliefern Kunden in ganz Europa – vom kleinen Betrieb bis zum internationalen Industrieunternehmen. Unsere Gabelstapler sind mehr als nur Maschinen – sie garantieren einen reibungslosen und nachhaltigen Ablauf Ihrer Logistikprozesse. ⭐ Was unterscheidet uns? ✅ Jeder Stapler durchläuft einen umfassenden technischen Service (Inspektion, Prüfung, Austausch von Filtern und Ölen, Aufarbeitung wichtiger Komponenten) ✅ Vollständige Sicherheitsprüfung (UVV/CE) auf Kundenwunsch ✅ Eigene Lackiererei & Werkstatt – Maschinen technisch und optisch im Top-Zustand ✅ Transport europaweit – mit eigener Flotte und geschulten Fahrern ✅ Einweisung des Fahrers + Funktionsprüfung vor Ort bei Anlieferung ✅ Umfassender After-Sales-Service & technischer Support – wir sind auch nach dem Kauf für Sie da ✅ Besichtigung & Probefahrt unserer Maschinen an unserem Standort möglich – herzlich willkommen! ✅ Hunderte zufriedene Kunden europaweit – werden auch Sie Teil davon ✅ Unterstützung bei Finanzierung – Zusammenarbeit mit den meisten Leasinggesellschaften ✅ Rechnung in EUR oder PLN – nach Kundenwunsch 🔹 Im Angebot: BAUMANN GS 70/14/50 – 7 t Seitenstapler Hjdpfx Aley H D T Io Isl 📅 Baujahr: 2007 ⏱️ Betriebsstunden: 10.649 h ⚡ Antrieb: Diesel 🏋️ Tragfähigkeit: 7.000 kg – Lastschwerpunkt 700 mm 🗜️ Mast: Duplex – 5.000 mm 🔧 Gabelzinken: 1.200 mm 🛞 Superelastik-Bereifung: Zustand 100% 🛠️ Technischer Zustand: Hervorragend – nach vollständigem Service ✨ Optischer Zustand: Gepflegt, rostfrei, sofort einsatzbereit 📏 Freihub: 1.250 mm Abmessungen: 📐 Fahrzeughöhe: 3.400 mm 📐 Gesamtlänge: 5.000 mm 📐 Breite: 2.300 mm 📐 Gabelverstellbreite: 1.500 mm 📐 Gesamthöhe: 3.750 mm 🏭 Ideal geeignet für: Lager mit schmalen Gängen Holz-, Stahl- und Rohrindustrie Transport von Langgut Innen- und Außeneinsatz

Tahun pembuatan: 2021, jam operasional: 4.748 h, Kondisi: sangat baik (bekas), en-001 Hsdpfxey El Tte Al Iol

Tahun pembuatan: 2020, jam operasional: 50 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: BV200219443, 🔥 Пиролизная очистка шнеков – ДЕМОНСТРАЦИОННАЯ УСТАНОВКА | до Ø70 мм | Полностью автоматическая | 12 месяцев гарантии Эффективное и безопасное решение для удаления остатков полимеров с шнеков, используемых в экструзии и литье под давлением – без деформации, без ручной очистки. Полностью изготовлено в Европейском Союзе. Hodpfx Aey Id Tqsl Iol _____ Ключевые особенности • Подходит для всех термопластичных материалов • Макс. диаметр шнека: Ø70 мм • Вертикальный процесс – отсутствие деформации шнека • Полностью автоматическая работа (оператор не требуется) • Время очистки: 3–8 часов (в зависимости от степени загрязнения) • Температура процесса: 400–500 °C • Интегрированная система газоочистки с водяным баком и насосом _____ Технические данные (Модель PC-70) • Макс. диаметр шнека: 70 мм • Макс. длина шнека: 2 450 мм • Макс. рабочая высота: 3 200 мм • Суммарная потребляемая мощность: 25 кВт _____ Состояние • Демонстрационная установка – напрямую от производителя • Отличное состояние, полная гарантия завода 12 месяцев • В наличии, немедленная поставка FCA BOCO цена: 27 990,- EUR без НДС _____ Производитель BOCO Pardubice Machines, s.r.o. (Чехия) Более 30 лет опыта в технологиях переработки пластмасс

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, masa garansi: 6 bulan, tegangan masuk: 400 V, tahun perombakan terakhir: 2026, Tersertifikasi DGUV hingga: 05/2027, lebar kerja: 700 mm, lebar sabuk konveyor: 700 mm, jenis arus masuk: tiga fasa, Mesin Pembentuk Croissant Universum HWM 50/70 EZ untuk semua jenis roti batang seperti Kornspitz, pretzel, dan roti lye lainnya. Mesin pelipat universal - kombinasi dapat digunakan untuk semua jenis adonan untuk pelipatan dan pembentukan panjang teknologi yang tangguh Mesin pembentuk croissant untuk kualitas tinggi yang konsisten! hanya di tempat kami diuji sesuai DGUV V3 koneksi 400V, steker 16A-CEE mesin bekas, direkondisi & diperiksa SAB dengan garansi + layanan suku cadang Hsdsy Ebiwjpfx Al Isl Kunjungi pameran besar kami!

Tahun pembuatan: 2025, Kondisi: baru, new machine year of manufacture: 2025 features and technical specifications: complete in standard version with: Hjdpfsw Nafksx Al Isl - sturdy, torsion-resistant frame made of steel, welded and bolted construction - upper slat press beam with 6 elements, lateral slat press beam with 5 elements - slat press beams with field-proven tolerance compensation (Ganner system) for tightly compressed carcass joints - counter-pressure surfaces (side pressure wall, base) are continuous 38 mm thick coated bearing plates - continuous pressing surface with a height of 95 mm at the lower vertical press beam - electric motor adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance carriage nuts with grease reservoir - pressing is performed electromechanically via 2 separate worm gear motors (2 x 0.75 kW) - the pressing force of the press beams is infinitely electronically adjustable by 2 potentiometers and controlled via frequency inverters, making the pressing force control completely wear-free - pressing force for horizontal press beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - pressing force for vertical press beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - pressing and adjustment speed of the press beams with fine positioning, via 3-step selector switch 5 / 10 / 25 mm/sec - inching operation for precise positioning of both press beams, e.g. for low pressing forces, drawers, and carcasses at 45° - very simple operation via 6 separate pushbuttons, 8 movement sequences selectable via control system - freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - post-press function to increase or reduce the pressing force during the pressing process - working height/feeding height: 300 mm - working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm including extra charge for rapid traverse speed for quick positioning of the press beams, controlled by automatic workpiece detection with sensors in the press beams, pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special parts including set of machine feet for 500 mm working height location: flörsheim availability: short notice

Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 4090, Width: 70 cm Hjdeh Ek Saepfx Al Isl Thickness: approx. 1 cm

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Hjdpfx Aoy Egz Sjl Isl Technical Data: Lamella body press from our showroom Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baik (bekas), 920001 Hjdpfx Alsy D Nkme Iel

Kondisi: bekas, Tahun pembuatan: 2004, technische-details-5-achsen-hsc-bearbeitungszentrum Hsdpoy D Tvmjfx Al Iel

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, jam operasional: 9.310 h, kapasitas angkut: 3.000 kg, tinggi angkat: 4.620 mm, pengangkatan bebas: 150 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, tinggi konstruksi: 2.975 mm, panjang garpu: 1.200 mm, jenis penggerak: Diesel, Forklift diesel Tipe tiang: Standar Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: normal Jenis ban depan: super elastik Jenis ban belakang: super elastik Sisi geser, perangkat penyetel garpu, Katup ke-3, katup ke-4, pemanas, kabin penuh, Hodpfxjy Iicqj Al Iol

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2009, jam operasional: 1.328 h, kapasitas angkut: 1.600 kg, tinggi angkat: 4.470 mm, pengangkatan bebas: 1.380 mm, jenis bahan bakar: diesel, tipe tiang: triplex, tinggi konstruksi: 1.980 mm, panjang garpu: 1.200 mm, berat kosong: 2.880 kg, jenis penggerak: Diesel, Forklift diesel Tipe tiang: Triplex Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: baik Ban depan tipe: Superelastik Ban belakang tipe: Superelastik Hedpfjy Iicksx Al Iol Side shifter, Katup ke-3, pemanas, kabin penuh,