Beli Donau Alpha 30 bekas (24.638)

Kondisi: bekas, Machine not operational – control unit is not functioning Special offer price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force 500 tons Distance between uprights (front/back): 2520 mm Table size: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Max. installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1,000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100–800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guideway for the ram - Hydraulic ram locking at top dead center - Free-standing control cabinet (200 x 50 cm) - Electrical control: SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7”) Dodpsdzqptjfx Ag Dekl - Free-standing two-hand control panel - Floor-level installation - Table plate: 2510 x 2530 x 135 mm (approx. 6,700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Space required for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Dkjdpsylnpijfx Ag Djl Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: bekas, Tahun pembuatan: 1971, HU168873 Dkjdpfeylpzyex Ag Dol

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang meja: 1.200 mm, lebar meja: 500 mm, penjepit spindle: MK 3, jenis penyesuaian ketinggian: listrik, Donau DR23 Mesin Bor Radial – Mesin Berkualitas Kokoh Dijual mesin bor radial Donau DR23 yang andal, ideal untuk bengkel, konstruksi logam, atau aplikasi industri. Mesin ini menonjol dengan konstruksi yang kokoh, presisi tinggi, serta kemampuan penggunaan yang fleksibel untuk pengeboran, chamfering, dan pemotongan ulir. Rincian: Pabrikan: Donau Dksdpfx Agoyrtkxj Dol Model: DR23 Mesin bor radial direkondisi oleh Vaumtec Chuck cepat tukar Konstruksi dari cor yang stabil Lengan penyangga dapat disesuaikan untuk pengerjaan fleksibel pada benda kerja berukuran besar Cocok untuk baja, aluminium, dan logam lainnya Putaran kanan-kiri

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 Dksdeyhdvkopfx Ag Dsl max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Dksdsu Aa I Sspfx Ag Dol Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Dkedsu Dg D Aepfx Ag Del Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Dkodpfxsrmkfne Ag Dsl Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 Dedpevv Spkjfx Ag Dokl GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: siap digunakan (bekas), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column stroke (W): 410 mm Arm travel: 1,050 mm Dksdpfx Agjyrdc Se Dol Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to come by for an inspection. We can also arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to view our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from the stated technical data as well as errors in the description of the item may occur and are subject to change.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, gores kuas bulu: 190 mm, kecepatan spindel (min.): 41 rpm, kecepatan spindel (maks.): 1.800 rpm, berat keseluruhan: 1.920 kg, berat benda kerja (maks.): 17 kg, ketebalan pelat baja (maks.): 32 mm, torsi: 250 Nm, tinggi meja: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve the table frame) Technical Data: Drilling capacity in solid material: St 60/E335 mm Ø 32 (at feed 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Worktable height: mm 900 Quill stroke: mm 190 Column travel: mm 400 Dedpfx Agorn Riqo Djkl Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Torque at spindle: max. Nm 250 Boom ease of movement: Radial N 25 Boom ease of movement: Axial N 25 Clamping force: Radial Nm 3500 Clamping force: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the middle of the working surface

Kondisi: bekas, Tahun pembuatan: 1960, Technische Details: Dedpfx Agjx Afn Ns Djkl

Kondisi: bekas, Tahun pembuatan: 1978, 10 MVA oil transformer, TuR Dresden, 30 / 10.5 kV with tap changer (19 steps), vector group YNyn0, equipped with conservator tank, Buchholz relay, air dryer, cooling fans, dial thermometer, year of manufacture 1978. Dodpfjt Akl Hox Ag Djkl

Kondisi: sangat baik (bekas), 30 linear metres of Schäfer Type R3000 Shelving System Used equipment, in like-new condition – see photos Height: 2.5 m Depth: 80 cm Load per shelf: 250 kg Bay width: approx. 128 cm Asking price: €6,900 net ex stock The offer includes: • 24 uprights/frames, 2.5 m high, galvanized • 144 shelves, 250 kg load per shelf, galvanized • 9 cross braces for stabilizing 6 levels per bay (additional levels available at extra cost) Also available with 100 cm bay width! Other configurations available. Heights of 2.5 m or 3.5 m in stock. Goods are in stock. Transport and assembly available on request. Inspection possible at any time by appointment. Further information on request. Over 5,000 linear metres of pallet racking from various manufacturers in stock at all times. Dedpfjd Nf Svox Ag Djkl (Technical specifications, details, and prices subject to change and prior sale. For terms and conditions, see our T&Cs. All prices excl. VAT ex stock.) Purchase / Sale: We are always seeking and offering numerous articles from various sectors: • Broom-clean company clearances • Liquidations Fast – flexible – efficient! We clear and/or dispose for insolvency administrators as well. Just send us a few keywords, and we will contact you immediately. To visit our page, please click on our logo!

Kondisi: baik (bekas), Approx. 30 linear meters of shelving rack Schaefer R3000 Manufacturer: Schaefer R3000 Condition: as new, see pictures. Over 300 meters available. Uprights, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load capacity per shelf, bay width approx. 100 cm Negotiable price: €2,690.00 net ex-warehouse The offer includes: - 31 uprights or frames, 2.5 m, galvanized - 90 shelves, 100 kg load capacity per shelf, galvanized - 10 cross braces for reinforcement - 3 levels per bay (additional levels available at extra cost) Other configurations possible. Heights of 2.3 m, 2.5 m or 3 m available. Goods are in stock. Over 3,000 linear meters of pallet racking from various manufacturers constantly in stock. Transport and assembly on request. Further information on request. (Specifications and prices subject to change and prior sale. Please see our General Terms and Conditions. All prices excluding VAT ex-warehouse) Purchase / Sale: We are always looking for or offering numerous items from various sectors. To visit our website, please click on our logo! Dkjdpecfhx Tefx Ag Djl - Broom-clean factory clearances - Business liquidations - Fast – flexible – efficient! We also clear and/or dispose of items for insolvency administrators. Send us a brief message and we will contact you promptly.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 30.000 kg, Perlengkapan: kendali jauh kaki, 30-ton load capacity, self-centering, new 380V Hand and foot remote control Rotation speed: 100 - 1000 mm/min Dkjdpfx Aewrpfgog Dsl Diameter range: 600 - 4500 mm Drive wheel diameter: 350 mm x width 180 mm Material: heat-resistant PU, non-slip Dimensions: 2350 x 1460 x 1050 mm Dual drive, synchronized

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 30.000 kg, Rotating Device for Containers, 30-ton load capacity, 400 V, 32A Dual drive motor with synchronized control Suitable for container diameters from 570 mm to 4500 mm Infinitely variable speed control via remote (forward/reverse) Forklift pockets Roller dimensions: 350 mm x 180 mm, PU-coated Speed range: 100 - 1000 mm/min. Drive motor: 2 x 1.1 kW Dimensions approx. 2750 mm x 500 mm Total weight (complete): 1200 kg Twin synchronized drive Brand-new machine, special price Total weight: 1.9 tons Dsdpfx Ajwinxajg Dekl

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MT 4) • Infinitely variable speed setting • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each on the rear and left side of machine base • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose to table top min. mm 40 max. mm 710 Dsdpox Uwpxjfx Ag Djkl Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capabilities Drilling capacity (solid material) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Kondisi: siap digunakan (bekas), 20240614-1 Djdsykut Sepfx Ag Dskl

Kondisi: baru, tinggi penggerindaan: 150 mm, jenis penyesuaian ketinggian: mekanis, tinggi total: 1.450 mm, panjang total: 1.800 mm, lebar total: 1.400 mm, berat keseluruhan: 850 kg, Perlengkapan: Penandaan CE, Structured and Sanding Machine / 4-Sided Brushing Machine Manufacturer: Alpha Brush Model: LS-TSB Universally applicable brush sanding machine with a total of 6 brush units for 4-sided sanding and structuring of wood-based materials such as panels, solid wood flooring, scaffold boards, cladding boards, and more. Working width: 300 mm Passage height: 150 mm Equipped with: 1x top brush unit, 2.2 kW 1x bottom brush unit, 2.2 kW 1x top brush unit, 2.2 kW 1x bottom brush unit, 2.2 kW 1x left brush unit, 1.1 kW 1x right brush unit, 1.1 kW Infinitely variable speed control for each brush group (top, bottom, sides) Brush diameter: 260 - 300 mm Quick-change system for brush heads Spring-loaded pressure roller, height individually adjustable Djdpsykh Tfsfx Ag Dokl Feed speed infinitely variable, approx. 2 - 20 m/min., 0.75 kW Digital setting displays Recommended extraction capacity: 3000-3500 m³/h Voltage: 400 - 480 V, 3 Ph, 50/60 Hz Protection: 32 A Dimensions approx. 1800 x 1400 x 1450 mm (LxWxH) Weight approx. 850 kg

Kondisi: baik (bekas), Tahun pembuatan: 1988, Fast radial drilling machine Manufacturer: Donau Model: DR 40 DIGI CONTROL: NC control Year of manufacture: 1988 Dkedpfxeikvcas Ag Del APPLICATIONS - DRILLING Drilling capacity (steel): 40 mm Max. throat depth: 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of gears: 2 Spindle taper: MK 4 SPECIFICATIONS Table size: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Mains voltage: 400 V Mains frequency: 50 Hz DIMENSIONS / WEIGHT Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Drive power: 6 kW

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, jumlah rol: 3, diameter rol: 118 mm, berat keseluruhan: 220 kg, daya: 0,75 kW (1,02 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, ct2275 Djdjxh D Nvjpfx Ag Djkl

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Max. roll diameter: 1250 mm, max. speed: 100 m/min, weight: 2.9 t. Dksdpfx Asf H Dlbsg Dsl

Kondisi: baik (bekas), Tahun pembuatan: 2009, Professional horizontal packaging machine from a renowned manufacturer. Suitable, for example, for packaging food products, confectionery, medical products, technical items, printed and paper products, household goods and toys, as well as textiles. Package width: 35 – 100 mm Package length: 65 – 160 mm Package height: 5 – 35 mm Dsdspm Hcbopfx Ag Dekl Output: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m 220V / 50-60 Hz / 2.7 kW

Kondisi: bekas, Tahun pembuatan: 1971, Technical details: Drilling capacity in steel (diameter): 23 mm Maximum workpiece height: ./x. 2 mm Drilling capacity in cast iron: Ø 26 mm Spindle taper: MT 3 Quill stroke: 135 mm (manual/automatic) Spindle speeds: 7 steps rpm Feed range: mm/rev Table size: 1200 x 500 mm Clamping surface of the table: 1070 x 400 mm Total power requirement: 3.55 kW Machine weight approx.: 1.4 t Dksdpfx Ajv Ay T Deg Dsl Machine dimensions approx. LxWxH: 1.7 x 1.2 x 2.2 m Arm: - Vertical adjustment: 450 mm and horizontal: 610 mm - Swivable 360°, hydraulic locking Right/left rotation for thread cutting with automatic reversing Operation via control panel Coolant tank with pump